Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Edexcel GCSE Physics (Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Key concepts of physics
Unit 2
Motion and forces
Unit 3
Conservation of energy
Unit 4
Waves
Unit 5
Light and the electromagnetic spectrum
Unit 6
Radioactivity
Unit 7
Astronomy
Avg
score:
–
Topics
done:
0/40

Stopping distances and braking distance

Practise 14 exam-style questions on Stopping distances and braking distance for Edexcel GCSE Physics (Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 14 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
14 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A car is travelling at 20 m/s. On one day the driver brakes to a stop on a level road. On another day the driver brakes to a stop from the same speed while driving down a steep hill.

The brakes produce the same braking force on both days.

Which statement is correct?

Choose your answer.

  • A braking distance longer downhill
  • B braking distance shorter downhill
  • C braking distance the same
  • D more kinetic energy downhill

Model answer

A - the braking distance is longer downhill.

Explanation

On a level road the work done by the brakes equals the car's initial kinetic energy. Going downhill, the car's gravitational potential energy also decreases as it moves, so the brakes must transfer more energy in total, and with the same braking force this needs a longer distance. A common error is to think that the braking distance depends only on the speed (C).

Mark scheme
  1. 1 mark

    A / braking distance longer downhill (1)

    The only correct answer is A: on the level road, the work done by the braking force (braking force × braking distance) equals the car's initial kinetic energy. Going down the hill, the car also loses gravitational potential energy as it moves, so the braking force must transfer this energy as well as the initial kinetic energy; with the same braking force, more work needs a longer braking distance (equivalently, part of the car's weight acts down the slope, against the braking force, so the deceleration is smaller). B is not correct because gravity makes the car harder to stop when it is going downhill, not easier; C is not correct because the braking distance depends on all the energy that the brakes must transfer, not only on the car's speed; D is not correct because the car has the same mass and the same speed, so it has the same kinetic energy. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

The graph shows the results of a computer model of the stopping distance of a car on a dry road and on a wet road at different speeds. The model uses the same driver and the same car each time.

A driver sees a fallen tree blocking the road 60 m ahead.

Use the graph to determine the highest speed from which the car could stop before reaching the tree:
- on a dry road
- on a wet road.

Line graph of stopping distance in m (y-axis, 0 to 140) against speed in m/s (x-axis, 0 to 30). "Dry road" is a smooth curve through (0, 0), (2.5, 2.23), (5, 5.42), (7.5, 9.58), (10, 14.7), (12.5, 20.8), (15, 27.8), (17.5, 35.8), (20, 44.8), (22.5, 54.7), (25, 65.6), (27.5, 77.4), (30, 90.2). "Wet road" (dashed) is a smooth curve through (0, 0), (2.5, 2.53), (5, 6.63), (7.5, 12.3), (10, 19.5), (12.5, 28.3), (15, 38.6), (17.5, 50.5), (20, 64), (22.5, 79), (25, 95.6), (27.5, 114), (30, 134).

Model answer

Reading across from a stopping distance of 60 m:
on a dry road, the highest speed is about 24 m/s
on a wet road, the highest speed is about 19 m/s.

Explanation

Read across from 60 m on the stopping distance axis to each line, then down to the speed axis. On a wet road the braking force is smaller, so the braking distance is longer at every speed and the car must be going more slowly to stop in the same distance. Take care to use the correct line for each road.

Mark scheme
  1. 1 mark

    (dry road) 23 to 24.5 (m/s) (1)

    Mark the two readings independently. allow a value in the range given, read where the dry-road line reaches a stopping distance of 60 m. If the two readings are given the wrong way round, award 1 mark only.

  2. 1 mark

    (wet road) 18.5 to 20 (m/s) (1)

    allow a value in the range given, read where the wet-road line reaches 60 m.

Question 3

3 marks

On a dry road, a car travelling at 20 m/s has a braking distance of 30 m when the driver brakes as hard as possible without skidding.

On an icy road, the largest braking force the tyres can give without skidding is only one fifth of the largest braking force on the dry road. On the icy road the driver slows down to 10 m/s.

Calculate the braking distance of the car on the icy road at 10 m/s, when the driver brakes as hard as possible without skidding.

Model answer

Braking distance ∝ (speed)², because the work done by the brakes equals the kinetic energy ½ × m × v². Halving the speed divides the kinetic energy by 4, so with the dry-road braking force the braking distance would be 30 ÷ 4 = 7.5 m.

Work done = force × distance, so with one fifth of the braking force the car needs five times the distance to remove the same kinetic energy: 7.5 × 5 = 37.5 m.

So even at half the speed, the braking distance on ice (37.5 m) is longer than on the dry road at 20 m/s (30 m).

Explanation

Braking distance = ½ × m × v² ÷ F, so it is proportional to v² and inversely proportional to the braking force. Halving the speed divides it by 4, but one fifth of the force multiplies it by 5, so the car needs further to stop than on the dry road at twice the speed. A common error is to halve the braking distance when the speed halves, as if it were proportional to speed.

Mark scheme
  1. 1 mark

    halving the speed divides the kinetic energy by 4, so (with the same braking force) the braking distance would be 30 ÷ 4 = 7.5 (m) (1)

    MP1 and MP2 can be in either order, e.g. 30 × 5 = 150 m at 20 m/s on ice, then ÷ 4. allow 30 × (10 ÷ 20)² × 5 for MP1 and MP2. Alternative method: dry deceleration = 20² ÷ (2 × 30) = 6.7 m/s² (MP1); icy deceleration = 6.7 ÷ 5 = 1.3 m/s² (MP2); x = 10² ÷ (2 × 1.3) = 38 m (MP3). An answer of 37.5 m with no working scores 3 marks. An answer of 75 m (30 × ½ × 5, braking distance wrongly taken as proportional to speed) scores MP2 only.

  2. 1 mark

    one fifth of the braking force must act over five times the distance to do the same work (to remove the same kinetic energy) / × 5 (1)

    allow 7.5 × 5 seen; allow braking distance = KE ÷ F, so one fifth of F gives five times the distance.

  3. 1 mark

    37.5 (m) (1)

    allow 37 to 38.5 (m) from rounded decelerations; allow 38 (m). No ecf from a wrong method.

Question 4

5 marks

A coach full of passengers has a total mass of 15 000 kg. It is travelling along a dual carriageway at 22 m/s when the driver sees that the traffic ahead has stopped and makes an emergency stop.

The driver's reaction time is 0.75 s.
The average braking force on the coach is 7.5 × 10⁴ N.

Calculate the stopping distance of the coach.

Model answer

thinking distance = speed × reaction time = 22 × 0.75 = 16.5 m

kinetic energy = ½ × m × v² = ½ × 15 000 × 22² = 3 630 000 J

The work done by the braking force equals the kinetic energy:
braking force × braking distance = 3 630 000 J
braking distance = 3 630 000 ÷ 75 000 = 48.4 m

stopping distance = 16.5 + 48.4 = 64.9 m = 65 m

Explanation

The stopping distance is the thinking distance (speed × reaction time) plus the braking distance. The braking distance comes from work done = kinetic energy, so braking distance = ½ × m × v² ÷ braking force. Common errors are forgetting the thinking distance, or not squaring the speed.

Mark scheme
  1. 1 mark

    (thinking distance =) 22 × 0.75 = 16.5 (m) (1)

    An answer of 65 m with no working scores 5 marks. An answer of 48.4 m (the braking distance only) with no working scores marking points 2, 3 and 4; an answer of 16.5 m with no working scores marking point 1. Alternative method for the braking distance: (deceleration =) 7.5 × 10⁴ ÷ 15 000 = 5.0 m/s² (MP2), x = 22² ÷ (2 × 5.0) (MP3), 48.4 m (MP4).

  2. 1 mark

    substitution: (KE =) ½ × 15 000 × 22² (= 3.63 × 10⁶ J) (1)

    allow 3.6 × 10⁶ J.

  3. 1 mark

    use of work done = kinetic energy, with rearrangement: (braking distance =) 3.63 × 10⁶ ÷ 7.5 × 10⁴ (1)

    ecf from their kinetic energy.

  4. 1 mark

    (braking distance =) 48.4 (m) (1)

    allow 48 (m), including 48 from 3.6 × 10⁶ J; ecf from their kinetic energy.

  5. 1 mark

    (stopping distance = 16.5 + 48.4 =) 65 (m) (1)

    allow values that round to 65 (e.g. 64.9), and 64.5 from 16.5 + 48; ecf: their thinking distance + their braking distance. Award 4 marks for an otherwise correct answer with a power of ten error in one of the distances.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.