Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Edexcel GCSE Physics (Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Key concepts of physics
Unit 2
Motion and forces
Unit 3
Conservation of energy
Unit 4
Waves
Unit 5
Light and the electromagnetic spectrum
Unit 6
Radioactivity
Unit 7
Astronomy
Avg
score:
–
Topics
done:
0/40

Core practical: waves in a solid and a fluid

Practise 14 exam-style questions on Core practical: waves in a solid and a fluid for Edexcel GCSE Physics (Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 14 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
14 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A student uses a ripple tank. A signal generator makes the dipper vibrate, producing water waves with a frequency of about 20 Hz.

Which is the most suitable way to find the frequency of the waves?

Choose your answer.

  • A count waves by eye for 10 s
  • B time one wave with a stopwatch
  • C read the signal generator display
  • D measure the gap between waves

Model answer

C - read the signal generator display.

Explanation

The waves are produced by the vibrating dipper, so their frequency equals the frequency of the signal generator. Counting waves is only practical at low frequencies of a few hertz; at about 20 Hz it is impossible by eye. Measuring the spacing of the waves gives the wavelength, a different quantity.

Mark scheme
  1. 1 mark

    C / read the signal generator display (1)

    The only correct answer is C: the dipper makes one wave for each vibration, so the waves have the frequency shown on the signal generator, which is read precisely. A is not correct because about 200 waves pass in 10 s, far too many and too fast to count by eye; B is not correct because one wave takes only about 0.05 s, much less than a person's reaction time; D is not correct because the gap between waves is the wavelength, not the frequency. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A student looks at the waves in a ripple tank through a flashing stroboscope. The waves have a frequency of 16 Hz.

When the stroboscope flashes 16 times each second, the waves appear to stand still.

Explain why the waves appear to stand still.

Model answer

The time between flashes is 1/16 s, which is the period of the waves, so between one flash and the next each wave moves forward exactly one wavelength. At every flash each crest is exactly where the crest in front of it was at the previous flash, so the pattern looks the same every time and the waves appear to stand still. The wavelength can then be measured from the still pattern.

Explanation

A stroboscope only lets you see the waves for an instant at each flash. If the flash frequency equals the wave frequency, the waves have moved on by exactly one wavelength between views, so each view is identical. The water keeps moving - it only looks still because of when it is seen.

Mark scheme
  1. 1 mark

    in the time between flashes / in 1/16 s, each wave moves forward exactly one wavelength / makes exactly one complete vibration (1)

    An explanation linking the time between flashes (MP1) to what is seen at each flash (MP2). accept 'the time between flashes is equal to the period of the waves'.

  2. 1 mark

    so at each flash every crest is where the next crest was at the previous flash / the pattern looks exactly the same at every flash (1)

    accept 'the waves are only ever seen at the same point in their cycle'. Do not accept 'the stroboscope stops / freezes the waves' with no explanation, or 'the light makes the water stop moving'.

Question 3

3 marks

A student connects a microphone to an oscilloscope to measure the frequency of the sound from a struck aluminium rod.

The time-base of the oscilloscope is set to 0.1 ms per division. On the screen, one complete wave of the trace takes up 4.0 horizontal divisions.

Calculate the frequency of the sound.

Use the equation: frequency = 1 ÷ period

Model answer

period = 4.0 divisions × 0.1 ms per division = 0.40 ms = 0.00040 s
frequency = 1 ÷ period = 1 ÷ 0.00040
frequency = 2500 Hz

Explanation

The time-base gives the time represented by each horizontal division, so the period is the number of divisions for one complete wave multiplied by 0.1 ms. The period must be in seconds before using frequency = 1 ÷ period. Forgetting that 1 ms = 0.001 s gives an answer 1000 times too small.

Mark scheme
  1. 1 mark

    (period =) 4.0 × 0.1 = 0.40 (ms) (1)

    An answer of 2500 (Hz) with no working scores 3 marks.

  2. 1 mark

    conversion: 0.40 ms = 0.00040 s / 4.0 × 10⁻⁴ s (1)

    accept the conversion seen within the substitution, e.g. 1 ÷ 0.0004.

  3. 1 mark

    evaluation: 2500 (Hz) (1)

    accept 2.5 kHz. A power of ten error (e.g. 2.5 Hz from 1 ÷ 0.40, or 25 000 Hz) scores 2. 4.0 ÷ 0.1 = 40 or 1 ÷ 4.0 = 0.25 (divisions not multiplied by the time-base) scores 0.

Question 4

4 marks

Light from a lamp above a ripple tank makes a pattern of bright lines on paper beneath the tank. The pattern on the paper is larger than the real waves.

To find the scale, a student puts a strip of card 10.0 cm long on the bottom of the tank. Its shadow on the paper is 12.5 cm long.

On the paper, the distance across 8 complete wavelengths is 20.0 cm. The frequency of the waves is 12 Hz.

Calculate the speed of the water waves in m/s.

Model answer

Wavelength on the paper = 20.0 ÷ 8 = 2.5 cm
The pattern is magnified by 12.5 ÷ 10.0 = 1.25, so the real wavelength = 2.5 ÷ 1.25 = 2.0 cm = 0.020 m
wave speed = frequency × wavelength = 12 × 0.020
wave speed = 0.24 m/s

Explanation

Because the lamp is above the tank, the pattern on the paper is a magnified shadow, so distances measured on the paper must be scaled down using an object of known length. Then v = f × λ with the real wavelength in metres. Using the wavelength measured on the paper gives a speed that is 25% too high.

Mark scheme
  1. 1 mark

    (wavelength on the paper =) 20.0 ÷ 8 = 2.5 (cm) (1)

    An answer of 0.24 (m/s) with no working scores 4 marks. MP1 and MP2 can be done in either order, e.g. real distance across 8 wavelengths = 20.0 × 10.0 ÷ 12.5 = 16.0 cm scores MP2, then ÷ 8 = 2.0 cm scores MP1.

  2. 1 mark

    (real wavelength =) 2.5 × 10.0 ÷ 12.5 = 2.0 (cm) (1)

    accept 2.5 ÷ 1.25. Multiplying by 1.25 instead (3.1 cm) is a wrong step and scores 0 for this mark; MP3 can still be scored by ecf.

  3. 1 mark

    substitution: (v =) 12 × 0.020 (1)

    allow ecf from their wavelength (converted to m). accept 12 × 2.0 = 24 (cm/s) for this mark.

  4. 1 mark

    evaluation: 0.24 (m/s) (1)

    The evaluation mark is for 0.24 m/s only. 24 cm/s or 24 m/s (power of ten error) scores 3. Using the wavelength on the paper (2.5 cm, not corrected for the magnification) gives 0.30 m/s, which scores MP1 and MP3 (ecf) only. Multiplying by 1.25 (0.375 m/s) also scores MP1 and MP3 only.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.