Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Edexcel GCSE Physics (Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Key concepts of physics
Unit 2
Motion and forces
Unit 3
Conservation of energy
Unit 4
Waves
Unit 5
Light and the electromagnetic spectrum
Unit 6
Radioactivity
Unit 7
Astronomy
Avg
score:
–
Topics
done:
0/40

Echoes, depth and waves at material interfaces

Practise 13 exam-style questions on Echoes, depth and waves at material interfaces for Edexcel GCSE Physics (Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 13 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
13 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A space probe orbiting Mars sends a radio signal to the Earth. The signal takes 14 minutes to travel from the probe to the Earth.

Radio waves travel through space at 3.0 × 10⁸ m/s.

How far is the probe from the Earth when it sends the signal?

Choose your answer.

  • A 1.3 × 10¹¹ m
  • B 2.5 × 10¹¹ m
  • C 4.2 × 10⁹ m
  • D 5.0 × 10¹¹ m

Model answer

B - 2.5 × 10¹¹ m.

Explanation

Use distance = speed × time with the time in seconds: 14 minutes = 840 s, so distance = 3.0 × 10⁸ × 840 = 2.5 × 10¹¹ m. This signal makes a one-way journey, so nothing is halved; halving is needed only for an echo, which travels to the reflecting object and back. Leaving the time in minutes is the other common error.

Mark scheme
  1. 1 mark

    B / 2.5 × 10¹¹ m (1)

    The only correct answer is B: the signal travels one way, from the probe to the Earth, so distance = speed × time = 3.0 × 10⁸ × (14 × 60) = 3.0 × 10⁸ × 840 = 2.5 × 10¹¹ m. A is not correct because it halves the distance - the time is halved only for an echo, which travels there and back; C is not correct because the time has been left in minutes (3.0 × 10⁸ × 14); D is not correct because it doubles the distance, as if the signal had travelled there and back. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A ship-testing tank is a very long tank of water. A wave-maker at one end produces waves, and engineers measure how model ships move in the waves.

At the far end of the tank there is no vertical wall. Instead there is a gently sloping 'beach' covered with a thick layer of coarse foam.

Explain why the far end of the tank is built like this.

Model answer

A vertical wall at the end of the tank would reflect the waves back along the tank. The reflected waves would combine with the new waves coming from the wave-maker, so the model ships would not be tested in the waves the engineers intended. The sloping foam beach absorbs the energy of the waves instead, so almost no waves are reflected back.

Explanation

At a hard vertical boundary water waves are reflected, but a gentle slope covered in foam absorbs their energy, so very little is reflected. Test tanks need this so that only the waves made by the wave-maker reach the models. Answers should name the effects (reflection, absorption) and say why reflected waves would be a problem.

Mark scheme
  1. 1 mark

    a vertical wall would reflect the waves back along the tank (1)

    An explanation linking any two from the three points; max 2. Mark each point independently. ignore 'to stop the water splashing out' or 'to make it like a real beach' with no reference to reflection or absorption.

  2. 1 mark

    the reflected waves would combine with / disturb the waves coming from the wave-maker, so the models would not be tested in the waves intended (1)

    allow the waves hitting the models would not be the ones the engineers set / measurements would be inaccurate because of reflected waves.

  3. 1 mark

    the sloping foam beach absorbs (the energy of) the waves, so (almost) no waves are reflected back along the tank (1)

    allow the energy of the waves is transferred to the foam / to thermal energy stores; allow the waves break on the slope and lose their energy.

Question 3

3 marks

Geologists carry out a seismic survey to find out about the rock layers under a field. A small explosion at the surface sends sound waves down into the ground. The waves are reflected from the top of a layer of hard rock, and the echo is detected at the surface 0.36 s after the explosion.

A borehole drilled nearby shows that the top of the hard rock is 450 m below the surface.

Calculate the average speed of the sound waves in the ground above the hard rock.

Assume that the waves travel straight down and straight back up.

Model answer

The sound travels down 450 m and back up 450 m, so the distance travelled = 2 × 450 = 900 m.

speed = distance ÷ time = 900 ÷ 0.36 = 2500 m/s

Explanation

The echo time covers the journey down to the rock and back, so either double the depth or halve the time before using speed = distance ÷ time. Geologists use a known depth like this to find the wave speed, so that echo times elsewhere can be turned into depths. Forgetting to double the distance gives 1250 m/s.

Mark scheme
  1. 1 mark

    (distance travelled =) 2 × 450 = 900 (m) / (one-way time =) 0.36 ÷ 2 = 0.18 (s) (1)

    An answer of 2500 m/s with no working scores 3 marks. An answer of 1250 m/s (450 ÷ 0.36, the distance not doubled) scores MP2 only.

  2. 1 mark

    use of v = x ÷ t: 900 ÷ 0.36 / 450 ÷ 0.18 (1)

    ecf from their distance or time.

  3. 1 mark

    2500 (m/s) (1)

    allow 2.5 × 10³ (m/s) / 2.5 km/s.

Question 4

4 marks

When an earthquake happens, P-waves and S-waves travel out through the rock. A seismometer at a monitoring station records the first P-waves 20 s before the first S-waves arrive.

The P-waves travel through the rock at 6.0 km/s. The S-waves travel through the rock at 3.5 km/s.

Calculate the distance from the earthquake to the monitoring station.

Assume that both types of wave travel along the same path at a constant speed.

Model answer

Let the distance be d km.
time for the P-waves = d ÷ 6.0
time for the S-waves = d ÷ 3.5

d ÷ 3.5 − d ÷ 6.0 = 20
d × (0.2857 − 0.1667) = 20
d × 0.119 = 20
d = 168 km

Check: P-waves take 168 ÷ 6.0 = 28 s and S-waves take 168 ÷ 3.5 = 48 s, a difference of 20 s.

Explanation

Both waves travel the same distance, but the slower S-waves take longer, so time = distance ÷ speed is written for each wave and the difference set equal to 20 s. The S-waves fall a further 0.119 s behind for every kilometre, so 20 s means about 168 km. Multiplying 20 s by the difference in speeds is a common wrong method.

Mark scheme
  1. 1 mark

    time for each wave written in terms of the distance d: d ÷ 6.0 and d ÷ 3.5 (1)

    An answer of 168 km with no working scores 4 marks. allow other correct methods, e.g. the S-waves fall behind the P-waves by (1 ÷ 3.5 − 1 ÷ 6.0) = 0.119 s for each km travelled (MP1, MP2), so d = 20 ÷ 0.119 (MP3) = 168 km (MP4); or a correct check by trial: at 168 km the P-waves take 28 s and the S-waves take 48 s, a difference of 20 s (4 marks). Wrong methods such as 20 × (6.0 − 3.5) = 50 km, 20 × 6.0 = 120 km or 20 × 3.5 = 70 km score 0.

  2. 1 mark

    d ÷ 3.5 − d ÷ 6.0 = 20 (1)

    allow the equation in s and m with the speeds in m/s.

  3. 1 mark

    rearrangement: d × (1 ÷ 3.5 − 1 ÷ 6.0) = 20 / d × 0.119 = 20 / d = 20 × 6.0 × 3.5 ÷ (6.0 − 3.5) (1)

    ecf from an equation of the correct form.

  4. 1 mark

    168 (km) (1)

    allow values that round to 170 (km); allow 1.68 × 10⁵ m.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.