Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/31

Specific latent heat

Practise 14 exam-style questions on Specific latent heat for OCR GCSE Physics (Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 14 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
14 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

1 kg of steam at 100 °C condenses to form 1 kg of water at 100 °C.

The specific latent heat of vaporisation of water is 2 260 000 J/kg.

Which statement describes what happens to 2 260 000 J of energy as the steam condenses?

Choose your answer.

  • A It is absorbed by the steam from the surroundings.
  • B It is destroyed as the steam turns into water.
  • C It is stored in the water, making the water hotter than 100 °C.
  • D It is transferred from the steam to the surroundings.

Model answer

D (it is transferred from the steam to the surroundings)

Explanation

The specific latent heat of vaporisation is the energy needed to turn 1 kg of liquid into gas at its boiling point. When the change of state is reversed (the gas condenses), the same amount of energy is transferred to the surroundings. The temperature stays at 100 °C while the steam condenses.

Mark scheme
  1. 1 mark

    D / it is transferred from the steam to the surroundings

    The only correct answer is D: when a gas condenses, the energy that was needed to turn the liquid into a gas is transferred back out, to the surroundings, with no change in temperature. A is not correct because energy is absorbed when water boils or evaporates, not when steam condenses. B is not correct because energy cannot be destroyed. C is not correct because the water formed is still at 100 °C: the energy leaves the water, it does not raise its temperature. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A heated mat at the entrance of a hospital melts snow so that people do not slip. In one hour, the mat melts 4.5 kg of snow that is at 0 °C.

The specific latent heat of fusion of water is 334 000 J/kg.

Calculate the energy needed to melt the snow.

Use the equation: thermal energy for a change in state = mass × specific latent heat

Model answer

Thermal energy = 4.5 × 334 000
= 1 503 000 J

Explanation

Snow at 0 °C is ice at its melting point, so melting it needs the specific latent heat of fusion. Multiply the mass by the specific latent heat: 4.5 × 334 000 = 1 503 000 J (about 1.5 MJ). The temperature of the snow does not change while it melts.

Mark scheme
  1. 1 mark

    substitution: 4.5 × 334 000; or a correct final answer of 1 503 000 J or 1 500 000 J with no working

    An answer of 1 503 000 J or 1 500 000 J (or 1.503 MJ or 1.5 MJ) with no working scores 2 marks. DO NOT ALLOW 334 000 ÷ 4.5.

  2. 1 mark

    evaluation: 1 503 000 (J) / 1 500 000 (J)

    ALLOW 1.503 × 10⁶ J or 1.5 × 10⁶ J. ALLOW 1503 kJ, 1.503 MJ or 1.5 MJ. IGNORE units.

Question 3

2 marks

A student measures the specific latent heat of vaporisation of water. She boils water in a beaker on a balance, using an immersion heater connected to a joulemeter.

She calculates: specific latent heat = energy transferred ÷ decrease in mass shown on the balance

While the water is boiling, some water splashes out of the beaker.

Explain how this affects the value of the specific latent heat that she calculates.

Model answer

The water that splashes out makes the balance reading fall more, so the decrease in mass she uses is bigger than the mass of water that actually turned into steam. She divides the energy by a mass that is too big, so her value of specific latent heat is too small.

Explanation

Specific latent heat = energy ÷ mass changed into steam. Splashing adds extra mass loss that needed no latent heat, so the mass in the calculation is too large and the answer too small. A lid with a small hole for the steam, or a lower heater power so the water boils gently, would reduce splashing.

Mark scheme
  1. 1 mark

    the decrease in mass on the balance is bigger than the mass of water that turned into steam

    ALLOW the mass she uses is too big / includes water that did not boil away. ALLOW some of the mass lost was not changed into steam.

  2. 1 mark

    so the value of specific latent heat she calculates is too small / lower than the accepted (data-book) value

    ALLOW the value is too low because she divides by a mass that is too big. DO NOT ALLOW the value is too high. IGNORE the value is inaccurate (without saying too small).

Question 4

4 marks

A steam humidifier adds water vapour to the air in a room by boiling water. Its heater has a power of 250 W.

Once the water is boiling, the humidifier runs for 1 hour. Assume that all of the energy from the heater is used to turn boiling water into steam.

The specific latent heat of vaporisation of water is 2 260 000 J/kg.

Calculate the mass of water that is turned into steam in 1 hour.

Use the equations:
energy transferred = power × time
thermal energy for a change in state = mass × specific latent heat

Model answer

Time = 1 hour = 60 × 60 = 3600 s
Energy transferred = 250 × 3600 = 900 000 J
900 000 = mass × 2 260 000
Mass = 900 000 ÷ 2 260 000
= 0.398 kg (about 0.40 kg)

Explanation

First find the energy from the heater with energy = power × time, using the time in seconds: 1 hour = 3600 s, so the energy is 900 000 J. Then rearrange the second equation: mass = energy ÷ specific latent heat = 900 000 ÷ 2 260 000 = 0.398 kg. Using 1 or 60 for the time instead of 3600 s gives an answer that is far too small.

Mark scheme
  1. 1 mark

    unit conversion: 1 hour = 3600 s; or a correct final answer of 0.398 kg or 0.40 kg with no working

    An answer of 0.398 kg or 0.40 kg (or 0.3982 kg) with no working scores 4 marks. ALLOW 0.0066 kg (time converted to 60 minutes, not to seconds) or 1.1 × 10⁻⁴ kg (time left as 1 hour) for 3 marks.

  2. 1 mark

    energy transferred = 250 × 3600 = 900 000 (J); or a correct final answer of 0.398 kg or 0.40 kg with no working

    ALLOW ECF from a wrong time (for example 250 × 60 = 15 000 J).

  3. 1 mark

    rearrangement and substitution: mass = 900 000 ÷ 2 260 000; or a correct final answer of 0.398 kg or 0.40 kg with no working

    ALLOW 900 000 = mass × 2 260 000. ALLOW ECF from a wrong energy value. DO NOT ALLOW 2 260 000 ÷ 900 000.

  4. 1 mark

    evaluation: 0.398 (kg) / 0.40 (kg)

    ALLOW 0.3982 (kg). ALLOW 398 g or 400 g. ALLOW ECF from a wrong energy value. IGNORE units.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.