Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/31

Series and parallel circuit calculations

Practise 16 exam-style questions on Series and parallel circuit calculations for OCR GCSE Physics (Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A toy torch has two identical filament lamps connected in series with a 3.0 V battery.

The current in one of the lamps is 0.30 A.

What is the current from the battery, and what is the potential difference across each lamp?

Choose your answer.

  • A 0.30 A and 1.5 V
  • B 0.30 A and 3.0 V
  • C 0.60 A and 1.5 V
  • D 0.60 A and 3.0 V

Model answer

A - 0.30 A and 1.5 V

Explanation

There is only one path in a series circuit, so the current from the battery is the same as the current in each lamp: 0.30 A. The battery's potential difference is shared between the components, and identical lamps get equal shares: 3.0 ÷ 2 = 1.5 V each. The full battery p.d. across each component, and currents that add up, are both features of parallel circuits.

Mark scheme
  1. 1 mark

    A / 0.30 A and 1.5 V

    The only correct answer is A: in a series circuit the current is the same everywhere, so the current from the battery is 0.30 A, and the 3.0 V of the battery is shared between the two identical lamps, so each has 1.5 V across it. B is not correct because each lamp would only have the full 3.0 V if the lamps were in parallel. C is not correct because the currents are not added in a series circuit. D is not correct because it uses parallel-circuit ideas for both the current and the p.d. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

The diagram shows the lighting circuit in a doll's house. Two filament lamps, L₁ and L₂, are connected in parallel with a 6.0 V battery.

The ammeter reads 0.25 A.

Calculate the resistance of lamp L₂.

Use the equation: potential difference = current × resistance

Circuit diagram. Going round the loop from the + terminal of the battery (labelled 6.0 V): two branches in parallel (one branch has lamp L₁; the other branch has lamp L₂ then an ammeter (reading 0.25 A)); then a closed switch; and back to the − terminal of the battery.

Model answer

The p.d. across lamp L₂ is 6.0 V, because it is in parallel with L₁.
resistance = potential difference ÷ current
resistance = 6.0 ÷ 0.25
resistance = 24 Ω

Explanation

Components in parallel each have the full battery potential difference across them, so lamp L₂ has 6.0 V across it. Rearrange the equation to resistance = potential difference ÷ current: 6.0 ÷ 0.25 = 24 Ω. Halving the battery p.d. is wrong here, because the p.d. is only shared between components that are in series.

Mark scheme
  1. 1 mark

    substitution: (resistance =) 6.0 ÷ 0.25; or a correct final answer of 24 Ω with no working

    An answer of 24 Ω with no working scores 2 marks. Lamp L₂ is on its own branch in parallel with L₁, so the p.d. across it is the full 6.0 V. ALLOW 6.0 = 0.25 × resistance. DO NOT ALLOW 3.0 ÷ 0.25 (the battery p.d. halved as if the lamps were in series): an answer of 12 Ω scores 0.

  2. 1 mark

    evaluation: 24 (Ω)

    IGNORE units unless the question asks for them.

Question 3

2 marks

Part of the circuit in a burglar alarm has a 1.5 kΩ resistor and a 3.0 kΩ resistor connected in series with a 9.0 V battery.

Calculate the potential difference across the 3.0 kΩ resistor.

Model answer

Total resistance = 1.5 + 3.0 = 4.5 kΩ
The 3.0 kΩ resistor has 3.0 ÷ 4.5 = two-thirds of the total resistance.
p.d. = 2/3 × 9.0 = 6.0 V

Explanation

In a series circuit the battery's potential difference is shared between the components in the same ratio as their resistances. The 3.0 kΩ resistor has twice the resistance of the 1.5 kΩ resistor, so it gets twice the p.d.: 6.0 V, leaving 3.0 V for the other resistor. You can also find the current first (9.0 ÷ 4500 = 0.002 A) and then use V = I × R.

Mark scheme
  1. 1 mark

    method: (3.0 ÷ 4.5) × 9.0 / two-thirds of 9.0 / the p.d. is shared in the ratio 1 : 2 / current = 9.0 ÷ 4500 = 0.002 A and p.d. = 0.002 × 3000; or a correct final answer of 6.0 V with no working

    An answer of 6.0 V (or 6 V) with no working scores 2 marks. ALLOW the current found in mA (2.0 mA) and used correctly. An answer of 3.0 V (the p.d. across the 1.5 kΩ resistor) or 4.5 V (the p.d. shared equally) scores 0.

  2. 1 mark

    evaluation: 6.0 (V)

    IGNORE units unless the question asks for them.

Question 4

4 marks

A student has three identical 10 Ω resistors and a 6.0 V battery. She needs a current of 0.20 A from the battery. She can use one, two or all three of the resistors.

Use a calculation to show how she should connect the resistors.

Explain why connecting the resistors in parallel would not give the current she needs.

Use the equation: potential difference = current × resistance

Model answer

Total resistance needed = potential difference ÷ current = 6.0 ÷ 0.20 = 30 Ω.
Resistances in series add up, so three 10 Ω resistors in series give 10 + 10 + 10 = 30 Ω. She should connect all three resistors in series with the battery.
In parallel, the current has more than one path, so the total resistance would be less than 10 Ω and the current would be more than 6.0 ÷ 10 = 0.60 A, which is far too large.

Explanation

Start from the resistance the circuit needs: R = V ÷ I = 6.0 ÷ 0.20 = 30 Ω. Resistances in series add up, so three 10 Ω resistors in series make 30 Ω. Connecting resistors in parallel always gives a total resistance smaller than any one of them, so it would make the current larger, not smaller.

Mark scheme
  1. 1 mark

    total resistance needed = 6.0 ÷ 0.20 = 30 Ω

    A correct arrangement (all three in series) with no calculation scores marking point 3 only. ALLOW a check of the current for her arrangement instead: 6.0 ÷ (10 + 10 + 10) = 0.20 A scores points 1 and 2. ALLOW R = V ÷ I.

  2. 1 mark

    resistances in series add up: 10 + 10 + 10 = 30 Ω (one resistor gives 10 Ω and two in series give 20 Ω, which are too small)

    ALLOW '3 × 10 Ω = 30 Ω'.

  3. 1 mark

    connect all three resistors in series (with the battery)

    DO NOT ALLOW any arrangement that includes resistors in parallel.

  4. 1 mark

    in parallel the total resistance is less than 10 Ω (less than one resistor), so the current would be more than 0.60 A / too large

    ALLOW 'connecting resistors in parallel gives the current more paths, so the total resistance falls and the current increases'. DO NOT ALLOW 'in parallel the resistances add up'.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.