Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/31

Pressure in fluids, force and area

Practise 10 exam-style questions on Pressure in fluids, force and area for OCR GCSE Physics (Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 10 questions
  • 1–3 marks each
  • Instant marking
  • No sign-up needed
10 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A student clamps a piece of wood in a vice in a workshop. The jaws of the vice press on the wood with a pressure of 50 000 Pa. The area of each jaw in contact with the wood is 0.0060 m².

Use the equation: pressure = force normal to a surface ÷ area of that surface

What is the force that each jaw exerts on the wood?

Choose your answer.

  • A 0.00000012 N
  • B 300 N
  • C 50 000 N
  • D 8 300 000 N

Model answer

B - 300 N
force = pressure × area = 50 000 × 0.0060 = 300 N

Explanation

Rearrange pressure = force ÷ area to give force = pressure × area: 50 000 Pa × 0.0060 m² = 300 N. Dividing the pressure by the area, or the area by the pressure, gives D or A. Pressure and force are different quantities, so the 50 000 in option C is not the force.

Mark scheme
  1. 1 mark

    B / 300 N

    The only correct answer is B: force = pressure × area = 50 000 × 0.0060 = 300 N. A is not correct because it is the area divided by the pressure (0.0060 ÷ 50 000). C is not correct because 50 000 is the pressure in pascals, not the force: the pressure must be multiplied by the area. D is not correct because it is the pressure divided by the area (50 000 ÷ 0.0060 = 8 300 000 N to 2 significant figures). ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

1 mark

A simple hydraulic machine has a small input piston and a large output piston, joined by a pipe full of oil. When the input piston is pushed down, the output piston moves up.

Which statement describes the output piston, compared with the input piston?

Choose your answer.

  • A It moves a longer distance and exerts a larger force.
  • B It moves a longer distance and exerts a smaller force.
  • C It moves a shorter distance and exerts a larger force.
  • D It moves a shorter distance and exerts a smaller force.

Model answer

C - It moves a shorter distance and exerts a larger force.

Explanation

A hydraulic machine is a force multiplier. The pressure is the same everywhere in the oil, so the large output piston has a larger force on it (force = pressure × area). The oil cannot be squashed, so the oil pushed out by the small piston fills a wider cylinder and the output piston rises only a short distance. A machine cannot give a larger force and a longer distance at the same time.

Mark scheme
  1. 1 mark

    C / It moves a shorter distance and exerts a larger force.

    The only correct answer is C: the pressure is the same throughout the oil, so the larger area of the output piston gives it a larger force (force = pressure × area); the oil cannot be compressed, so the oil pushed out of the small cylinder spreads over the larger area of the output piston, which therefore moves a shorter distance. A is not correct because a larger force over a longer distance would mean more work done (energy transferred) by the output piston than on the input piston, which is impossible. B is not correct because the output piston has the larger area, so it exerts the larger force and moves the shorter distance. D is not correct because the larger area of the output piston gives a larger force, not a smaller one. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 3

2 marks

Many mountain bikes have hydraulic disc brakes. Squeezing the brake lever pushes on a liquid called brake fluid. The pressure is passed along a thin hose of brake fluid to pistons at the wheel, which press the brake pads against a metal disc.

If air bubbles get into the brake fluid, the lever feels 'spongy': it moves a long way when it is squeezed, and the brakes work less well.

Explain why air bubbles in the brake fluid make the brakes work less well.

Model answer

Air is a gas, and a gas can be compressed, but the liquid brake fluid cannot. When the rider squeezes the lever, the air bubbles are squashed instead of the pressure in the fluid increasing much, so the pressure is not fully passed on to the brake pistons. The pads push on the disc with a smaller force, so the brakes work less well and the lever moves a long way.

Explanation

A hydraulic system works because a liquid can hardly be compressed, so a push at one end is passed straight through the liquid to the other end. A gas can be squashed because its particles are far apart. Air bubbles act like a spring: squeezing the lever squashes the bubbles instead of pressing the brake pads hard onto the disc. This is why mechanics 'bleed' hydraulic brakes to remove any air.

Mark scheme
  1. 1 mark

    air / a gas can be compressed (squashed), but the (liquid) brake fluid cannot (be compressed)

    The idea that the air can be compressed is needed for this mark. ALLOW the particles in air are far apart, so the air can be squashed, but the particles in a liquid are touching / close together. DO NOT ALLOW the brake fluid (liquid) can be compressed.

  2. 1 mark

    so squeezing the lever squashes the air bubbles instead of increasing the pressure (much) / the pressure (force) is not (fully) passed on to the brake pads, so the pads push on the disc with a smaller force

    ALLOW the movement of the lever is used up squashing the air. ALLOW the brake pads are not pushed hard against the disc. IGNORE the air makes the fluid lighter / less dense. IGNORE the air leaks out.

Question 4

3 marks

A mini digger moves its arm with hydraulic rams. A pump in the body of the digger pushes oil along long, flexible hoses to each ram. The hoses bend as the arm moves. Inside each ram, the oil pushes on a piston, and the piston pushes the arm.

Explain how the push of the pump is passed along a long, bent hose to the piston in a ram. Use ideas about the oil and about pressure.

Model answer

The oil is a liquid, so it cannot be compressed. When the pump pushes oil into one end of the hose, the oil does not squash up: oil is pushed out of the other end. The pump makes a pressure in the oil, and this pressure is passed through the oil to every part of it, in all directions, so it is passed round the bends and along the whole length of the hose. In the ram, the pressure of the oil causes a force at right angles to the surface of the piston, which pushes the piston out and moves the arm.

Explanation

A hydraulic system passes on pressure through a liquid. Because a liquid can hardly be compressed, a push at one end moves the liquid at the other end, and the pressure is the same throughout the liquid, whatever the shape of the hose. The pressure then causes a force at right angles to the piston (force = pressure × area). This is why hydraulic machines can use flexible hoses to reach moving parts.

Mark scheme
  1. 1 mark

    the oil is a liquid, so it cannot be compressed (squashed): when the pump pushes oil into one end of the hose, oil is pushed out of the other end

    ALLOW 'oil is (almost) incompressible' / 'the particles in the oil are already touching, so it cannot be squashed'. DO NOT ALLOW 'the oil is squashed along the hose'.

  2. 1 mark

    the pressure made by the pump is passed through the oil to every part of it / is the same throughout the oil, so the length and the bends of the hose do not stop it

    ALLOW 'the pressure in the oil acts in all directions, so it is passed round the bends'. DO NOT ALLOW 'the same force is passed along the hose' (it is the pressure that is passed on).

  3. 1 mark

    the pressure of the oil causes a force at right angles to the surface of the piston, which pushes the piston (and the arm)

    ALLOW 'the oil pushes on the piston with a force equal to pressure × area'. ALLOW perpendicular / normal to the piston. The idea that the pressure of the oil produces a force on the piston is needed.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.