Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/31

Electromagnetism and solenoids

Practise 13 exam-style questions on Electromagnetism and solenoids for OCR GCSE Physics (Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 13 questions
  • 1–3 marks each
  • Instant marking
  • No sign-up needed
13 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A student has a length of insulated wire, a cell and a switch. She wants to make the strongest magnetic field she can with this wire and the same current.

Which arrangement should she use?

Choose your answer.

  • A a coil of the wire with nothing inside it
  • B a coil of the wire wound around a copper rod
  • C a coil of the wire wound around an iron rod
  • D the wire laid out straight

Model answer

C

Explanation

Coiling a wire into a solenoid makes the magnetic fields of all the turns add together inside the coil, so the field is much stronger than around a straight wire. Putting an iron core inside makes it stronger still, because the iron becomes a magnet in the field of the coil. Copper is not a magnetic material, so a copper rod is no better than nothing.

Mark scheme
  1. 1 mark

    C / a coil of the wire wound around an iron rod

    The only correct answer is C: winding the wire into a coil makes the fields of the turns add together, and the iron rod becomes magnetised and makes the field much stronger. A is not correct because a coil with no core gives a weaker field than the same coil with an iron core. B is not correct because copper is not a magnetic material, so it does not make the field stronger. D is not correct because a straight wire gives the weakest field of the four. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

1 mark

A long straight wire passes straight down through a hole in a wooden bench. Four plotting compasses are placed on the bench around it, all the same distance from the wire: one to the north of the wire, one to the east, one to the south and one to the west. A large current flows in the wire, so the effect of the Earth's magnetic field can be ignored.

The four compass needles all point in different directions.

Explain why.

Model answer

The magnetic field lines around the wire are circles centred on the wire. Each needle lines up along the circle where it is, so the field points a different way at each of the four positions.

Explanation

The magnetic field around a long straight wire goes round the wire in circles. A compass needle lines up with the field where it is placed, so it points along the circle, at right angles to the line joining it to the wire. The direction of the circle is different at each point round the wire, so the four needles all point different ways; they do not point at the wire.

Mark scheme
  1. 1 mark

    the magnetic field lines are circles around the wire, so the direction of the field is different at each compass / each needle lines up along the circle through it, which points a different way at each position

    The idea of circular field lines around the wire, linked to a different direction at each position, is needed. ALLOW the field goes round the wire, so each needle points round the wire (at right angles to the line joining it to the wire). DO NOT ALLOW the needles point towards or away from the wire / the compasses are attracted to the wire.

Question 3

2 marks

Some circuit breakers contain an electromagnet. The current in the circuit flows through the coil of the electromagnet. Next to the electromagnet there is an iron lever, which a spring holds away from it. If the lever is pulled towards the electromagnet, it opens a switch and the current stops.

Explain why the lever is pulled towards the electromagnet only when the current becomes too large.

Model answer

The strength of the electromagnet's magnetic field depends on the current: the larger the current, the stronger the field and the bigger its pull on the iron lever. With a normal current the pull is smaller than the force of the spring, so the lever does not move. Only when the current is too large is the pull bigger than the spring force, so the lever moves and opens the switch.

Explanation

The magnetic field of a coil gets stronger as the current increases. The spring sets a threshold: the iron lever moves only when the magnetic pull is bigger than the spring force, which happens only at a large current. The circuit breaker therefore cuts off dangerously large currents but leaves normal currents alone.

Mark scheme
  1. 1 mark

    the strength of the magnetic field (of the electromagnet) depends on the current: a larger current gives a stronger field and a bigger pull on the iron lever

    ALLOW the bigger the current, the stronger the electromagnet. DO NOT ALLOW a larger current makes the lever heavier / makes the spring weaker.

  2. 1 mark

    with a normal current the magnetic pull is smaller than the force of the spring (so the lever stays where it is); only a large current gives a pull bigger than the spring force

    The comparison with the spring force is needed. ALLOW the pull of the electromagnet is only strong enough to beat the spring when the current is too large.

Question 4

3 marks

A student makes two electromagnets, P and Q. Each has 30 turns of the same insulated wire wound around an identical iron nail 8 cm long, and each carries the same current.

In electromagnet P the turns are wound close together over 3 cm of the nail. In electromagnet Q the same number of turns is spread out evenly over 7 cm.

Electromagnet P picks up 9 steel paper clips. Electromagnet Q picks up 3 steel paper clips.

Explain these results.

Model answer

Electromagnet P has the stronger magnetic field because it picks up 9 paper clips, three times as many as Q. Each turn of the coil produces a magnetic field, and the fields of the turns add together. In P the 30 turns are packed into 3 cm, so there are more turns in each centimetre and their fields add up to a stronger field than in Q, where the turns are spread out over 7 cm.

Explanation

The number of turns, the current and the core are the same, so the only difference is how closely the turns are wound. Winding wire into a coil makes the fields of the turns add together; the closer together the turns, the more strongly they combine. This is why a solenoid with many turns packed into a short length makes a strong field.

Mark scheme
  1. 1 mark

    electromagnet P has the stronger magnetic field, because it picks up more paper clips (9 compared with 3 / three times as many)

    ALLOW P is stronger, with the data quoted. IGNORE references to the nails being different (they are identical).

  2. 1 mark

    each turn of the coil produces its own magnetic field, and the fields of the turns add together

    ALLOW the magnetic effects of the turns combine / reinforce each other. DO NOT ALLOW P has more turns (both have 30).

  3. 1 mark

    in P the turns are closer together / there are more turns in each centimetre, so their fields add up to a stronger field than in Q, where the turns are spread out

    The idea of turns being closer together or more turns per centimetre (per unit length) is needed. ALLOW the coil of P is shorter, so its turns are more concentrated. DO NOT ALLOW P has a larger current.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.