Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/22

Units, prefixes, significant figures and standard form

Practise 16 exam-style questions on Units, prefixes, significant figures and standard form for Edexcel GCSE Combined Science (Foundation Physics Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A student writes four measurements in her notes.

Which measurement is NOT written in standard form?

Choose your answer.

  • A 4.7 × 10³ Ω
  • B 3.0 × 10⁸ m/s
  • C 12 × 10⁻³ A
  • D 6.4 × 10⁻⁶ m

Model answer

C - 12 × 10⁻³ A

Explanation

A number in standard form is written as A × 10ⁿ, where A is at least 1 and less than 10 and n is a whole number, which can be negative. 12 × 10⁻³ A has the right value (0.012 A) but 12 is too big, so it should be written 1.2 × 10⁻² A. A common mistake is to think that a negative power of ten is not allowed in standard form.

Mark scheme
  1. 1 mark

    C / 12 × 10⁻³ A

    The only correct answer is C: in standard form the number in front of the power of ten must be at least 1 and less than 10, and 12 is more than 10 (in standard form this current is 1.2 × 10⁻² A). A is not correct because 4.7 is between 1 and 10, so 4.7 × 10³ Ω is in standard form; B is not correct because 3.0 is between 1 and 10; D is not correct because 6.4 is between 1 and 10 (a negative power of ten is allowed in standard form). Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

Ffion streams a film on her tablet. The fully charged battery lasts for 2 hours 45 minutes.

Calculate this time in seconds.

Model answer

2 hours = 2 × 60 × 60 = 7200 s
45 minutes = 45 × 60 = 2700 s
total time = 7200 + 2700 = 9900 s

Explanation

One hour is 60 × 60 = 3600 s and one minute is 60 s, so change the hours and the minutes into seconds separately and add them. Another way is to write 45 minutes as 0.75 hours, so the time is 2.75 hours and 2.75 × 3600 = 9900 s. A common mistake is to write 2 hours 45 minutes as 2.45 hours: there are 60 minutes in an hour, not 100.

Mark scheme
  1. 1 mark

    a correct method for changing the time into seconds: 2 × 3600 + 45 × 60 / 7200 + 2700 / 165 × 60 / 2.75 × 3600; or a correct final answer of 9900 s with no working

    An answer of 9900 s with no working scores 2 marks. 2.45 × 3600 = 8820 s (2 hours 45 minutes wrongly treated as 2.45 hours) scores 0. 165 on its own (the time in minutes) scores 0. 2 × 3600 = 7200 s on its own (the 45 minutes left out) scores 0.

  2. 1 mark

    evaluation: 9900 (s)

    accept 9.9 × 10³ (s) in any typed form, e.g. 9.9 times 10 to the power 3 or 9.9E3 (the letter x or an asterisk may be typed for ×, and the power may follow a caret, be a superscript or be typed on the line after the 10). Ignore units.

Question 3

2 marks

A moving walkway at an airport carries passengers 45 cm every second.

Calculate how far a passenger standing on the walkway is carried in 3 minutes. Give your answer in metres.

Model answer

3 minutes = 3 × 60 = 180 s
45 cm every second = 0.45 m every second
distance = 0.45 × 180 = 81 m

Explanation

The walkway moves 45 cm in each second, so first find how many seconds there are in 3 minutes (180 s), then multiply. Change cm into m by dividing by 100, either before or after multiplying. Common mistakes are to multiply 45 by 3 (using minutes instead of seconds) or to leave the answer in cm.

Mark scheme
  1. 1 mark

    time changed into seconds and used: 3 × 60 = 180 (s) and 45 × 180 = 8100 (cm) / 0.45 × 180; or a correct final answer of 81 m with no working

    An answer of 81 m with no working scores 2 marks. An answer of 8100 (the distance in cm, not changed into metres) scores 1 mark (marking point 1). 45 × 3 = 135 or 0.45 × 3 = 1.35 (minutes not changed into seconds) scores 0.

  2. 1 mark

    evaluation: 81 (m)

    accept 81.0 (m). Do not accept 8100 (cm), 135 or 1.35. Ignore units.

Question 4

4 marks

The engines of a small car ferry have a total power of 4.2 MW. The ferry crosses to an island in 25 minutes, with its engines at full power.

Calculate the energy transferred by the engines in this time.

Use the equation

energy transferred = power × time

Give your answer in GJ.

Model answer

power = 4.2 MW = 4.2 × 10⁶ W
time = 25 × 60 = 1500 s
energy transferred = 4.2 × 10⁶ × 1500 = 6.3 × 10⁹ J
1 GJ = 10⁹ J, so energy transferred = 6.3 GJ

Explanation

Before using the equation, put both quantities into SI units: mega means × 10⁶, so 4.2 MW = 4.2 × 10⁶ W, and 25 minutes = 1500 s. Power in watts × time in seconds gives energy in joules. Giga means × 10⁹, so divide the energy in joules by 10⁹ to give the answer in GJ. A common mistake is to forget to change the minutes into seconds.

Mark scheme
  1. 1 mark

    power in watts: 4.2 MW = 4 200 000 W / 4.2 × 10⁶ W; or a correct final answer of 6.3 GJ with no working

    An answer of 6.3 GJ with no working scores 4 marks. An answer of 6.3 × 10⁹ J (not changed into GJ) scores 3 marks. 4.2 × 25 = 105 (no conversions) scores 0. If one conversion is wrong (e.g. 25 × 100 = 2500 s, or 4.2 MW = 4200 W), the other conversion mark can still be awarded, marking point 3 can be awarded by ecf for their energy, and marking point 4 for their energy correctly changed into GJ.

  2. 1 mark

    time in seconds: 25 × 60 = 1500 (s); or a correct final answer of 6.3 GJ with no working

    accept 25 minutes = 1500 s.

  3. 1 mark

    (energy =) 4 200 000 × 1500 = 6 300 000 000 (J) / 6.3 × 10⁹ (J); or a correct final answer of 6.3 GJ with no working

    accept any typed form of 6.3 × 10⁹, e.g. 6.3 times 10 to the power 9 or 6.3E9 (the letter x or an asterisk may be typed for ×, and the power may follow a caret, be a superscript or be typed on the line after the 10). ecf their power and time.

  4. 1 mark

    evaluation: 6.3 (GJ)

    ecf their energy in J ÷ 1 000 000 000 (10⁹), correctly evaluated. Ignore units.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.