Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/22

Power and efficiency

Practise 17 exam-style questions on Power and efficiency for Edexcel GCSE Combined Science (Foundation Physics Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 17 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
17 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A team of husky dogs pulls a sled across flat snow. The dogs do 54 000 J of work in 1.5 minutes.

What is the mean power of the dogs?

Choose your answer.

  • A 360 W
  • B 600 W
  • C 36 000 W
  • D 81 000 W

Model answer

B (1.5 minutes = 90 s; P = 54 000 ÷ 90 = 600 W)

Explanation

Recall that power = work done ÷ time taken, with the time in seconds. 1.5 minutes is 1.5 × 60 = 90 s, not 150 s. Forgetting to change minutes into seconds gives an answer 60 times too big.

Mark scheme
  1. 1 mark

    B / 600 W

    The only correct answer is B: 1.5 minutes = 90 s, and power = work done ÷ time taken = 54 000 ÷ 90 = 600 W. A is not correct because it uses 150 s for the time (54 000 ÷ 150 = 360 W); 1.5 minutes is 90 s. C is not correct because it divides by 1.5 without changing minutes to seconds (54 000 ÷ 1.5 = 36 000 W). D is not correct because it multiplies the work done by the time (54 000 × 1.5 = 81 000) instead of dividing. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

On a building site, a pile driver lifts a heavy hammer and then drops it onto a steel post, to drive the post into the ground. An electric motor lifts the hammer.

For each lift, 80 000 J of energy is supplied to the motor, and the gravitational potential energy store of the hammer increases by 52 000 J.

Calculate the efficiency of the motor as it lifts the hammer.

Use the equation

efficiency = (useful energy transferred by the device) ÷ (total energy supplied to the device)

Model answer

efficiency = 52 000 ÷ 80 000
efficiency = 0.65 (65%)

Explanation

The useful energy is the energy that goes into the hammer's gravitational potential energy store; the total energy supplied is the 80 000 J supplied to the motor. Put the useful energy on top. Efficiency has no unit and can be written as a decimal (0.65) or a percentage (65%); an answer bigger than 1 means the values are the wrong way round.

Mark scheme
  1. 1 mark

    substitution: (efficiency =) 52 000 ÷ 80 000; or a correct final answer of 0.65 (65%) with no working

    An answer of 0.65 or 65% with no working scores 2 marks. 80 000 ÷ 52 000 = 1.5 (inverted) scores 0. (80 000 − 52 000) ÷ 80 000 = 0.35 (the fraction wasted) scores 0.

  2. 1 mark

    evaluation: 0.65 / 65%

    An answer of 65 with no % sign, or 0.65%, scores 1 mark only (marking point 1).

Question 3

3 marks

A large wind turbine has a gearbox between its blades and its generator. When the turbine is working, the gears in the gearbox turn very fast. The gearbox needs a cooling system: oil carries energy away from the gears to a radiator, and a fan blows air over the radiator.

Explain why the gearbox gets hot, and why the energy that the cooling system removes from the gearbox is wasted.

Model answer

The gears rub against each other as they turn, so there is friction between them. The friction transfers energy from the kinetic store of the gears to the thermal store of the gearbox, so its temperature rises. The cooling system then transfers this energy by heating to the air around the turbine, where it is dissipated and stored in a less useful way. This energy never reaches the generator, so it does not produce electricity: it is wasted.

Explanation

Mechanical processes become wasteful when friction between moving parts causes a rise in temperature: the energy goes into thermal stores and is dissipated by heating the surroundings. The useful job of the turbine is to transfer energy to the generator, so any energy heating the gearbox is wasted. Avoid saying the energy is 'used up' or 'lost': it still exists, but spread out in the surroundings.

Mark scheme
  1. 1 mark

    the gears / moving parts rub against each other, so there is friction between them

    Any three from marking points 1 to 4; max 3. allow 'work is done against friction in the gearbox'. Ignore 'the gears move fast' on its own.

  2. 1 mark

    energy is transferred (from the kinetic store of the gears) to the thermal store of the gears / gearbox, so their temperature rises

    allow heat (energy) for thermal energy.

  3. 1 mark

    the cooling system transfers this energy by heating to the surrounding air, where it is dissipated / spread out (and stored in a less useful way)

    Do not accept 'the energy is destroyed / used up'.

  4. 1 mark

    this energy is not transferred to the generator / is not used to generate electricity, so it is not useful

    allow 'it does not do the job of the turbine'.

Question 4

4 marks

A coastguard helicopter hovers above a mountainside. Its winch lifts an injured walker and a rescuer vertically up to the helicopter at a steady speed. Their total mass is 150 kg. The winch lifts them through a height of 30 m in 25 s.

The useful energy transferred is the increase in the gravitational potential energy store of the walker and the rescuer.

Calculate the useful power output of the winch.

Gravitational field strength (g) = 10 N/kg

Use the equations

ΔGPE = m × g × Δh

P = E ÷ t

Model answer

ΔGPE = m × g × Δh
ΔGPE = 150 × 10 × 30 = 45 000 J

P = E ÷ t
P = 45 000 ÷ 25
P = 1800 W

Explanation

Work in two steps: first find the useful energy (the increase in gravitational potential energy), then divide it by the time to find the power. Remember to multiply by g: leaving it out gives 180 W. A power of 1800 W means that 1800 J of energy goes into the gravitational store every second.

Mark scheme
  1. 1 mark

    substitution: (ΔGPE =) 150 × 10 × 30; or a correct final answer of 1800 W with no working

    An answer of 1800 W with no working scores 4 marks. An answer of 45 000 (J) (the energy only) scores marking points 1 and 2. An answer of 180 W (g left out: 150 × 30 ÷ 25) scores 1 mark (marking point 3, ecf). An answer of 1 125 000 (45 000 × 25) scores marking points 1 and 2 only.

  2. 1 mark

    evaluation: (ΔGPE =) 45 000 (J); or a correct final answer of 1800 W with no working

  3. 1 mark

    substitution: (P =) 45 000 ÷ 25; or a correct final answer of 1800 W with no working

    ecf their value of ΔGPE from marking point 2. 25 ÷ 45 000 (inverted) does not score this mark.

  4. 1 mark

    evaluation: 1800 (W)

    accept 1.8 kW. Ignore a missing unit.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.