Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/22

Contact and non-contact forces and lubrication

Practise 15 exam-style questions on Contact and non-contact forces and lubrication for Edexcel GCSE Combined Science (Foundation Physics Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Friction is a vector quantity.

Which statement explains why friction is a vector quantity?

Choose your answer.

  • A friction is measured in newtons
  • B friction acts only when surfaces touch
  • C friction always makes objects slow down
  • D friction has a size and acts in a particular direction

Model answer

D (friction has a size and acts in a particular direction)

Explanation

A vector quantity has both magnitude (size) and a specific direction; a scalar quantity has size only. Friction always acts in a particular direction, opposite to the motion (or attempted motion) of the surfaces, so it is a vector. All forces are vectors, which is why a force is shown by an arrow: its length shows the size and it points in the direction of the force.

Mark scheme
  1. 1 mark

    D / friction has a size and acts in a particular direction

    The only correct answer is D: a vector quantity has both a size (magnitude) and a particular direction, and friction acts in a particular direction, opposite to the way the surfaces move (or try to move) over each other. A is not correct because the unit does not explain what makes a quantity a vector: a vector is defined by having a direction as well as a size. B is not correct because this explains why friction is a contact force, not why it is a vector. C is not correct because friction does not always slow objects down (friction between your shoes and the ground lets you walk), and this is not what makes a quantity a vector. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

Amira gives a box of books a push across a level wooden floor and then lets go. The box slides to the right and slows down.

While the box is sliding, the floor exerts two forces on it: a normal contact force and friction.

Give one similarity and one difference between these two forces.

Model answer

Similarity: both are contact forces. They act only because the box and the floor are touching.
Difference: the normal contact force acts upwards, at right angles to the floor, but friction acts along the floor, to the left, opposite to the direction in which the box is moving.

Explanation

Contact forces act only when objects touch, so the floor can exert both of these forces on the box only because the box is touching it. A normal contact force always acts at right angles to the surfaces that are touching, while friction acts along the surfaces, opposite to the direction in which they slide over each other. Saying only that the forces 'act in different directions' is not enough: give the direction of each force.

Mark scheme
  1. 1 mark

    similarity: both are contact forces / both act only because the box and the floor are touching

    allow 'both are vector quantities' / 'both have a size and a direction'. Ignore 'both are forces', 'both are measured in newtons' and 'both are exerted by the floor' (these do not go beyond the question). Do not accept 'both act in the same direction' or 'both are non-contact forces'.

  2. 1 mark

    difference: the normal contact force acts upwards / at right angles to the floor, but friction acts along the floor / to the left / opposite to the direction in which the box is moving

    The direction of each force is needed. allow 'friction slows the box down (acts against its motion), but the normal contact force does not: it holds the box up / stops it sinking into the floor'. Ignore 'they act in different directions' on its own. Do not accept 'friction acts to the right' or 'friction acts in the direction the box moves'.

Question 3

2 marks

Kezia puts oil on the chain and on the wheel bearings of her bicycle. She is careful not to get any oil on the brake blocks or on the rims of the wheels, where the brake blocks press.

Explain why she keeps oil away from the brake blocks and the rims.

Model answer

The brakes work by friction between the brake blocks and the wheel rims: the friction transfers energy from the kinetic store of the bicycle to thermal stores, which slows it down. Oil is a lubricant, so it would reduce this friction. The brakes would then not slow the bicycle down or stop it as quickly, which would be dangerous.

Explanation

Lubrication reduces friction, which helps where friction wastes energy, as in a chain or wheel bearings. In brakes, friction is needed: it is how the brakes transfer energy away from the kinetic store. So lubricant must be kept away from the brake blocks and rims.

Mark scheme
  1. 1 mark

    the brakes need friction (between the brake blocks and the rims) to slow down / stop the bicycle

    allow 'the brakes work by friction'.

  2. 1 mark

    oil is a lubricant, so it would reduce the friction (between the blocks and the rims), so the bicycle would not slow down / stop as quickly (which is dangerous)

    allow 'oil would make the rims slippery, so the brakes would not stop the bicycle'. allow 'less energy would be transferred from the kinetic store, so the bicycle would take longer to stop'.

Question 4

4 marks

A machine in a factory has an electric motor that turns a long steel shaft. The shaft turns in bearings.

An engineer found that, when the bearings were dry, the motor had to transfer energy at a rate of 1500 W to keep the shaft turning at its normal speed. After the bearings were lubricated with grease, the motor needed to transfer energy at a rate of only 1200 W to keep the shaft turning at the same speed.

Calculate how much less energy the motor transfers in 1 hour now that the bearings are lubricated. Explain why lubricating the bearings has this effect.

Use the equation

P = E ÷ t

Model answer

difference in power = 1500 − 1200 = 300 W
1 hour = 3600 s
E = P × t
E = 300 × 3600
E = 1 080 000 J

The grease is a lubricant: it reduces the friction between the shaft and the bearings. So less energy is dissipated by heating the bearings and the surroundings, and the motor can transfer energy at a lower rate and still keep the shaft turning at the same speed.

Explanation

The motor now transfers 300 J less energy every second. Rearrange P = E ÷ t to E = P × t and use the time in seconds (1 hour = 3600 s). Lubrication reduces unwanted energy transfer: less friction means less energy is wasted heating the bearings and the surroundings.

Mark scheme
  1. 1 mark

    first step: difference in power = 1500 − 1200 = 300 (W); or a correct final answer of 1 080 000 J with no working

    An answer of 1 080 000 J with no working scores marking points 1 to 3. allow, as the first step, the energy transferred in 1 hour at either power: 1500 × 3600 = 5 400 000 J or 1200 × 3600 = 4 320 000 J. An answer of 300 J or 18 000 J (time not changed correctly into seconds: 300 × 1 or 300 × 60) scores marking points 1 and 3 (2 marks), as Pearson allows when a time is not changed into seconds. 5 400 000 J or 4 320 000 J on its own (the energy at one power only) scores marking point 1 only.

  2. 1 mark

    substitution with time in seconds: (E =) 300 × 3600; or a correct final answer of 1 080 000 J with no working

    1 hour = 3600 s. allow 5 400 000 − 4 320 000 for this mark.

  3. 1 mark

    evaluation: 1 080 000 (J)

    accept 1.08 MJ or 1080 kJ. allow 18 000 or 300 for this mark only if the time was not changed correctly into seconds (see the first point). Ignore a missing unit.

  4. 1 mark

    the grease reduces the friction in the bearings, so less energy is dissipated by heating (the bearings and the surroundings)

    Both less friction and less energy dissipated (wasted) by heating are needed. allow 'less energy is transferred to the thermal store of the bearings'. Ignore 'the shaft turns faster' (the speed is the same).

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.