Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/22

Charge, current and energy transferred

Practise 18 exam-style questions on Charge, current and energy transferred for Edexcel GCSE Combined Science (Foundation Physics Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 18 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
18 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A charge of 15 C flows through a motor in 5.0 s.

What is the current in the motor?

Choose your answer.

  • A 0.33 A
  • B 75 A
  • C 3.0 A
  • D 20 A

Model answer

C - 3.0 A.

Explanation

From charge = current × time, current = charge ÷ time = 15 ÷ 5.0 = 3.0 A: 15 C flowing in 5 s means 3 C pass each second. The wrong options come from dividing the wrong way round, multiplying or adding the two numbers.

Mark scheme
  1. 1 mark

    C / 3.0 A

    The only correct answer is C: current = charge ÷ time = 15 ÷ 5.0 = 3.0 A (from charge = current × time). A is not correct because it is 5.0 ÷ 15 (time divided by charge). B is not correct because it is 15 × 5.0 (charge multiplied by time). D is not correct because it is 15 + 5.0 (the two values added). Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

The bell at a school rings for 12 s at the end of each lesson. The current in the bell is 0.35 A.

Calculate how much charge passes through the bell each time it rings.

Use the equation

charge = current × time

Model answer

charge = current × time
charge = 0.35 × 12
charge = 4.2 C

Explanation

Substitute the current in amperes and the time in seconds into charge = current × time: 0.35 × 12 = 4.2 C. The time is already in seconds, so no conversion is needed. The common error is to divide instead of multiply.

Mark scheme
  1. 1 mark

    substitution: (charge =) 0.35 × 12; or a correct final answer of 4.2 C with no working

    An answer of 4.2 C with no working scores 2 marks. 0.35 ÷ 12 = 0.029 or 12 ÷ 0.35 = 34 (wrong method) scores 0.

  2. 1 mark

    evaluation: 4.2 (C)

    Ignore units unless the question asks for them.

Question 3

3 marks

The rear light of a bicycle has a current of 0.060 A. The light is switched on for 25 minutes.

Calculate the amount of charge that passes through the light during this time.

Model answer

time = 25 × 60 = 1500 s
charge = current × time
charge = 0.060 × 1500
charge = 90 C

Explanation

Recall charge = current × time (Q = I × t). The time must be in seconds, so first convert 25 minutes to 25 × 60 = 1500 s. Then 0.060 × 1500 = 90 C. Forgetting to convert minutes to seconds gives 1.5 C, the most common mistake in this kind of question.

Mark scheme
  1. 1 mark

    conversion: (time =) 25 × 60 = 1500 (s); or a correct final answer of 90 C with no working

    An answer of 90 C with no working scores 3 marks. An answer of 1.5 (C) (0.060 × 25, time not converted to seconds) scores 2 marks (marking points 2 and 3). 0.060 ÷ 1500 or 1500 ÷ 0.060 = 25 000 (wrong method) scores marking point 1 only.

  2. 1 mark

    substitution: (Q = I × t =) 0.060 × 1500; or a correct final answer of 90 C with no working

    The equation Q = I × t (charge = current × time) must be recalled. allow 0.060 × 25 for this mark (no conversion).

  3. 1 mark

    evaluation: 90 (C)

    allow 1.5 (C) for this mark only if the time was not converted (see the first point). Ignore units unless the question asks for them.

Question 4

4 marks

A cordless drill has an 18 V battery. While Marek drills some holes, the battery transfers 21 600 J of energy to the drill's motor. The current in the motor is 4.0 A.

Calculate the time for which the motor runs.

Use the equations

energy transferred = charge moved × potential difference

charge = current × time

Model answer

energy transferred = charge moved × potential difference
charge = 21 600 ÷ 18 = 1200 C
charge = current × time
time = 1200 ÷ 4.0
time = 300 s

Explanation

Work in two steps. First use the energy and the potential difference to find the charge: 21 600 ÷ 18 = 1200 C. Then use the charge and the current to find the time: 1200 ÷ 4.0 = 300 s (5 minutes). The usual errors are multiplying instead of dividing when rearranging, or stopping after the first step and giving the charge as the answer.

Mark scheme
  1. 1 mark

    rearrangement and substitution: (charge =) 21 600 ÷ 18; or a correct final answer of 300 s with no working

    An answer of 300 s with no working scores 4 marks. accept 5.0 minutes. Alternative method: 4.0 × 18 = 72 (marking points 1 and 2), time = 21 600 ÷ 72 (marking point 3), 300 s (marking point 4). 21 600 × 18 = 388 800 scores 0 for marking points 1 and 2, but allow ecf for marking points 3 and 4.

  2. 1 mark

    (charge =) 1200 (C); or a correct final answer of 300 s with no working

    accept 1.2 × 10³ C or 1.2 kC.

  3. 1 mark

    rearrangement and substitution: (time =) 1200 ÷ 4.0; or a correct final answer of 300 s with no working

    allow ecf from an incorrect charge. 1200 × 4.0 = 4800 (wrong rearrangement) scores 0 for this point and the next.

  4. 1 mark

    evaluation: 300 (s)

    accept 5.0 minutes / 5 min. Ignore units unless the question asks for them.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.