Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/22

Energy stores and transfers in systems

Practise 16 exam-style questions on Energy stores and transfers in systems for Edexcel GCSE Combined Science (Foundation Physics Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Physicists use the idea of a closed system when they describe energy transfers.

State what is meant by a closed system, in terms of energy.

Model answer

A closed system is a system that no energy can enter or leave, so its total energy stays the same.

Explanation

Inside a closed system, energy can still be transferred from one store to another, but none enters or leaves the system. So the total energy of a closed system never changes. A common mistake is to say that no energy transfers happen at all in a closed system.

Mark scheme
  1. 1 mark

    a system that no energy can enter or leave / there are no energy transfers into or out of the system

    accept 'no energy is transferred to or from the surroundings' / 'an isolated system where the total energy cannot change because no energy can get in or out'. Do not accept 'a sealed box', 'a system that is closed' or 'no matter can get in or out' with no reference to energy not entering or leaving. Do not accept 'a system where energy is not used up' or 'a system where no energy is transferred' (energy can be transferred between stores inside a closed system).

Question 2

2 marks

Lena bends a piece of thick wire backwards and forwards quickly, many times. The wire becomes hot where it bends.

Explain how the energy of the wire changes.

Model answer

Each time Lena bends the wire, her force does work on it, so energy is transferred mechanically to the wire. This increases the thermal store of the wire where it bends, so its temperature rises. The hot wire then transfers energy by heating to the surrounding air.

Explanation

One way of changing the energy of a system is by a force doing work on it. As Lena bends the wire, her force does work on it, and this energy goes into the thermal store of the wire, so it gets hot. Some students only say the wire 'heats up', without linking it to work done by a force and to the thermal store.

Mark scheme
  1. 1 mark

    Lena's force does work on the wire (as she bends it) / energy is transferred (to the wire) mechanically, by a force

    accept 'work is done (by Lena) bending the wire'. allow 'energy is transferred from the chemical store of Lena's muscles by a force'. Do not accept 'the wire is bent' with no reference to work, a force or a mechanical transfer of energy. Ignore references to friction.

  2. 1 mark

    (so) the thermal (energy) store of the wire increases

    accept 'the thermal energy of the wire increases' / 'energy is transferred to the thermal store of the wire'. Do not accept 'the wire gets hot' alone (given in the question), 'the wire makes heat' or 'the kinetic store of the wire increases'.

Question 3

2 marks

On a farm, a sloping conveyor belt carries bales of hay up into the loft of a barn. The belt is driven by an electric motor. A bale on the belt moves up the slope at a steady speed.

Give the energy store of the bale that increases, and the way that energy is transferred to the bale.

Model answer

The gravitational store of the bale increases. Energy is transferred to the bale mechanically, by the force from the belt doing work on it.

Explanation

When a force moves an object, it does work and transfers energy to the object. The bale moves up the slope at a steady speed, so its kinetic store does not change, but it gets higher, so its gravitational store increases. The motor is supplied with energy electrically, but the energy reaches the bale through the force of the belt.

Mark scheme
  1. 1 mark

    (the) gravitational (potential energy) store (of the bale)

    accept GPE store. Do not accept kinetic store (the speed is steady) or thermal store. If more than one store is given, do not award this mark.

  2. 1 mark

    by a force doing work / mechanically / the force from the belt does work on the bale

    accept 'work done by the conveyor belt'. Do not accept 'electrically' (the motor is supplied electrically, but the energy reaches the bale through the force of the belt) or 'by heating'.

Question 4

4 marks

Two identical cars are travelling at the same speed.

- The driver of car A uses the brakes. Car A slows down and stops on a level road.
- The driver of car B switches off the engine at the bottom of a steep hill. Car B rolls up the hill without braking until it stops.

Compare the energy changes for the two cars.

Model answer

Both cars lose all of their kinetic store, and as they have the same mass and speed, both lose the same amount of energy.

In car A, the brakes do work: friction between the brake pads and discs transfers the energy to the thermal store of the brakes, which get hot, and then it is dissipated to the surroundings.

In car B, most of the energy goes into the gravitational store of the car as it rises up the hill. Only a small amount is transferred to thermal stores by air resistance and friction in the wheels. Car B's energy is still stored usefully: if it rolled back down, its kinetic store would increase again, but car A's energy cannot be got back.

Explanation

A comparison needs to say what is the same and what is different for the two cars. Both kinetic stores decrease by the same amount; the difference is where the energy goes: braking transfers it to thermal stores (dissipated), while rolling uphill transfers most of it to the gravitational store. Students often describe only one car, or say the energy is 'lost' when the brakes are used.

Mark scheme
  1. 1 mark

    the kinetic store of both cars decreases (to zero) by the same amount (because they have the same mass and speed)

    Any four from marking points 1 to 6, max 4. Max 2 if only one car is described.

  2. 1 mark

    car A: the brakes do work (friction) / energy is transferred mechanically by the friction force between the brake pads and the discs

    accept 'work is done by the braking force'.

  3. 1 mark

    car A: (the energy goes to) the thermal store of the brakes (which get hot) and then the surroundings / the energy is dissipated

    accept 'thermal store of the brakes, tyres and road'. Do not accept 'the energy is lost / destroyed'.

  4. 1 mark

    car B: (most of the energy goes to) the gravitational store of the car (as it rises up the hill)

    accept 'the car gains gravitational potential energy'.

  5. 1 mark

    car B: a small amount of energy is transferred to thermal stores (by air resistance / friction in the wheels and bearings)

    Do not accept 'car B transfers no energy to the surroundings'.

  6. 1 mark

    car B's energy is still stored (in its gravitational store) and could be transferred back to its kinetic store if it rolled back down the hill, but car A's energy cannot be got back

    accept 'car B's energy is stored usefully but car A's energy is wasted / dissipated'.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.