Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/22

The heating effect of a current

Practise 16 exam-style questions on The heating effect of a current for Edexcel GCSE Combined Science (Foundation Physics Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

When there is a current in a metal wire, the wire gets hotter.

What causes this?

Choose your answer.

  • A protons moving along the wire rub against each other
  • B electrons colliding with the ions in the metal lattice
  • C ions flowing along the wire and colliding with the electrons
  • D electrons being used up and releasing their energy

Model answer

B - electrons colliding with the ions in the metal lattice

Explanation

A metal is a lattice of positive ions with free electrons that can move through it. The moving electrons collide with the ions and transfer energy to them, making them vibrate more, so the metal gets hotter. Remember that the electrons move and the ions stay in place.

Mark scheme
  1. 1 mark

    B / electrons colliding with the ions in the metal lattice

    The only correct answer is B: the current in a metal is a flow of electrons; as they move through the wire they collide with the positive ions in the metal lattice and transfer energy to them, so the ions vibrate more and the temperature of the wire rises. A is not correct because protons are in the nuclei of the ions and do not move along the wire; C is not correct because the ions stay in their positions in the lattice (they only vibrate) while the electrons move; D is not correct because electrons are not used up: the same electrons keep flowing round the circuit. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

In an electric car, some of the energy transferred from the battery is dissipated by heating in the motor and in the wires, because of the heating effect of the current.

Explain why this reduces the distance the car can travel before its battery needs recharging.

Model answer

The energy dissipated by heating the motor and wires is wasted: it ends up in the thermal store of the surroundings instead of the kinetic store of the car. So more energy has to be taken from the battery to travel each kilometre, and the energy stored in the battery runs out after a shorter distance.

Explanation

This is a disadvantage of the heating effect: energy transferred by heating where it is not wanted is wasted. A battery stores a fixed amount of energy, so the more is wasted, the less is left to move the car. Answers need to link the wasted energy to the battery running out sooner.

Mark scheme
  1. 1 mark

    the energy dissipated by heating is wasted / is not transferred to the kinetic store of the car

    An explanation linking the two points. accept 'less of the energy from the battery is used to move the car'. allow 'energy is lost heating the wires and motor instead of moving the car'.

  2. 1 mark

    so more energy has to be transferred from the battery for each kilometre / the energy stored in the battery is used up after a shorter distance

    accept 'the battery runs down / goes flat sooner'. Ignore 'the battery gets hot' or 'the car goes slower'.

Question 3

3 marks

A pair of heated socks is powered by a 3.7 V battery pack. The current in the heating wires is 2.0 A.

Show that the energy transferred by the heating wires in 30 minutes is about 13 kJ.

Use the equation

E = I × V × t

Model answer

t = 30 × 60 = 1800 s
E = I × V × t = 2.0 × 3.7 × 1800
E = 13 320 J = 13.3 kJ, which is about 13 kJ

Explanation

In a 'show that' question every step of the working must be shown, and the final value must be given to more figures than the value in the question. Convert 30 minutes to seconds first, then convert the answer in joules to kilojoules (divide by 1000) to compare it with 13 kJ.

Mark scheme
  1. 1 mark

    time conversion: 30 × 60 = 1800 (s)

    This is a 'show that' question: the marks are for the working, and the given value on its own scores 0. The conversion may be seen in the substitution.

  2. 1 mark

    substitution: (E =) 2.0 × 3.7 × 1800

    allow ecf from an incorrect time in seconds. 2.0 × 3.7 × 30 = 222 (time not converted) scores this mark only.

  3. 1 mark

    evaluation: 13 320 (J) / 13.3 kJ

    The calculated value (13 320 J, 13.32 kJ or 13.3 kJ) must be seen; '13 kJ' on its own does not score this mark.

Question 4

4 marks

An electric bike has a rechargeable battery. The battery is charged by a charger that is plugged into the mains.

While the battery is charging, the current in the battery is 2.5 A and the potential difference across the battery is 42 V. In 60 s, the charger takes 7100 J of energy from the mains. The energy that is not transferred to the battery is dissipated by heating in the charger.

Calculate the energy dissipated by heating in the charger in 60 s, and explain why the charger gets warm.

Use the equation

E = I × V × t

Model answer

Energy transferred to the battery: E = I × V × t = 2.5 × 42 × 60 = 6300 J
Energy dissipated by heating in the charger = 7100 − 6300 = 800 J
The wires and components in the charger have resistance. The current does work against this resistance: the electrons collide with the ions in the metal and transfer energy to them, so the thermal store of the charger increases and it gets warm.

Explanation

Use E = I × V × t with the current in the battery and the potential difference across it to find the energy transferred to the battery, then subtract this from the energy taken from the mains. The rest is dissipated because the current does work against the resistance of the charger's wires and components. A common error is to give 6300 J, the energy transferred to the battery, as the answer.

Mark scheme
  1. 1 mark

    substitution: (E =) 2.5 × 42 × 60; or a correct final answer of 800 J with no working

    An answer of 800 J with no working scores marking points 1, 2 and 3. An answer of 6300 J (the energy transferred to the battery) scores marking points 1 and 2. 6300 + 7100 = 13 400 J scores marking points 1 and 2. 2.5 × 42 = 105 (time left out) does not score marking point 1 or 2.

  2. 1 mark

    energy transferred to the battery = 6300 (J); or a correct final answer of 800 J with no working

    This value may be seen in the subtraction. Ignore units.

  3. 1 mark

    evaluation: (energy dissipated =) 7100 − 6300 = 800 (J)

    allow ecf: 7100 − their energy transferred to the battery (e.g. 7100 − 105 = 6995 J, with the time left out, scores this mark only).

  4. 1 mark

    the wires / components in the charger have resistance, so the current does work against it / the electrons collide with the ions in the (metal) wires, transferring energy to the thermal store of the charger

    accept 'the current heats the wires in the charger because they have resistance'. Ignore 'energy is dissipated by heating' on its own (it repeats the question). Do not accept 'the electrons rub against the wires' (friction) or 'the energy is used up'.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.