Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/24

Measuring speed, typical speeds and accelerations

Practise 15 exam-style questions on Measuring speed, typical speeds and accelerations for Edexcel GCSE Combined Science (Foundation Physics Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A weather forecast says that there will be a moderate breeze this afternoon.

Which of these is the most likely speed of the wind?

Choose your answer.

  • A 0.07 m/s
  • B 0.7 m/s
  • C 7 m/s
  • D 70 m/s

Model answer

C

A moderate breeze blows at about 7 m/s.

Explanation

Typical wind speeds are a few metres per second: a breeze blows at about 5 to 8 m/s, and a gale at about 20 m/s. Compare with other speeds you know: 7 m/s is a little faster than a typical cyclist. A speed of 70 m/s is more than twice the speed of a car on a motorway and would cause great damage.

Mark scheme
  1. 1 mark

    C / 7 m/s

    The only correct answer is C: typical wind speeds are a few metres per second, and the Met Office's Beaufort scale gives a moderate breeze as about 6 to 8 m/s. A is not correct because 0.07 m/s is far too slow: the air would seem completely still; B is not correct because 0.7 m/s is slower than walking pace and would hardly be felt; D is not correct because 70 m/s (about 160 mph) is a wind speed found only in the most violent storms, such as hurricanes. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A toy car runs along a track and passes through a light gate connected to a data logger. A card 12 cm long is fixed to the car. The data logger records that the card blocks the light beam for 0.075 s.

Calculate the speed of the car as it passes through the light gate. Give your answer in m/s.

Use the equation

speed = distance ÷ time

Model answer

length of card = 12 cm = 0.12 m
speed = distance ÷ time = 0.12 ÷ 0.075
speed = 1.6 m/s

Explanation

The light gate measures how long the card takes to pass through the beam. In that time the car moves forward by the length of the card, so speed = length of card ÷ time. Convert 12 cm to 0.12 m first, or your answer will be in cm/s (160) rather than m/s.

Mark scheme
  1. 1 mark

    substitution: (speed =) 0.12 ÷ 0.075 / 12 ÷ 0.075; or a correct final answer of 1.6 m/s with no working

    An answer of 1.6 m/s with no working scores 2 marks. An answer of 160 (12 ÷ 0.075 with the length left in cm) scores 1 mark. 0.075 ÷ 0.12 = 0.625 and 12 × 0.075 = 0.9 (wrong methods) score 0.

  2. 1 mark

    evaluation: 1.6 (m/s)

    Allow 1.60.

Question 3

2 marks

A trolley with a card fixed to it rolls down a sloping runway and passes through two light gates. The card blocks the first light gate for 0.090 s and the second light gate for 0.050 s.

Explain what these results show about the motion of the trolley.

Model answer

The card is the same length at both light gates, but it takes less time to pass through the second one (0.050 s instead of 0.090 s). So the trolley is moving faster at the second light gate: it is speeding up as it rolls down the runway.

Explanation

A light gate times how long the card blocks the beam. The card's length does not change, so a shorter time means a higher speed (speed = length of card ÷ time). The time falls from 0.090 s to 0.050 s, so the trolley is accelerating.

Mark scheme
  1. 1 mark

    the (same length of) card passes through the second light gate in a shorter time (than the first)

    Allow the card blocks the second beam for less time. Allow it takes less time to travel the length of the card at the second gate.

  2. 1 mark

    so the trolley is moving faster at the second light gate / the trolley is speeding up / accelerating

    Allow the speed increases down the runway. Do not accept 'the trolley is moving at a constant speed' or 'the trolley is slowing down'.

Question 4

4 marks

A student holds a steel ball and a table-tennis ball 1.8 m above the floor and drops them at the same time. A light gate just above the floor measures the speed of the steel ball as 6.0 m/s. The steel ball falls freely.

Calculate the time the steel ball takes to fall to the floor.

Use the equation

acceleration = change in velocity ÷ time taken

The table-tennis ball reaches the floor after the steel ball. Explain why.

Model answer

The steel ball falls freely, so its acceleration is 10 m/s².
time taken = change in velocity ÷ acceleration = (6.0 − 0) ÷ 10 = 0.60 s
The table-tennis ball is very light, so the air resistance on it is large compared with its weight. The resultant force on it is less than its weight, so its acceleration is less than 10 m/s² and it takes longer to reach the floor.

Explanation

You need to recall that the acceleration in free fall is 10 m/s², then rearrange the equation: time taken = change in velocity ÷ acceleration. Objects fall with the same acceleration only when air resistance is negligible. For a very light object like a table-tennis ball, air resistance is a large fraction of its weight, so it does not fall freely.

Mark scheme
  1. 1 mark

    substitution or rearrangement using the free-fall acceleration: 10 = (6.0 − 0) ÷ t / (t =) 6.0 ÷ 10; or a correct final answer of 0.60 s with no working

    An answer of 0.60 s with no working scores marking points 1 and 2. Allow g = 9.8 m/s² or 9.81 m/s² (t = 0.61 s). Allow the alternative method using the average speed: (0 + 6.0) ÷ 2 = 3.0 m/s and time = 1.8 ÷ 3.0 scores marking point 1, and 0.60 s scores marking point 2. 6.0 × 10 = 60 and 10 ÷ 6.0 = 1.7 (wrong methods) score 0.

  2. 1 mark

    evaluation: 0.60 (s)

    Allow 0.6 or 0.61. Ignore units.

  3. 1 mark

    air resistance on the table-tennis ball is large compared with its weight / the table-tennis ball is very light, so air resistance has a bigger effect on it

    Allow air resistance is not negligible for the table-tennis ball. Do not accept 'the steel ball is heavier, so it falls faster' with no mention of air resistance.

  4. 1 mark

    so the resultant force on the table-tennis ball is less than its weight / its acceleration is less than the acceleration in free fall / it does not fall freely

    Allow its acceleration is less than g or less than that of the steel ball. Allow it speeds up more slowly. Do not accept 'it falls at a constant speed'.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.