Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/24

Core practical: force, mass and acceleration

Practise 16 exam-style questions on Core practical: force, mass and acceleration for Edexcel GCSE Combined Science (Foundation Physics Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Freya keeps the same hanging masses on the string, so the accelerating force on her trolley does not change. For each new run she adds a 250 g mass to the trolley.

What happens to the acceleration of the trolley each time she adds a mass?

Choose your answer.

  • A it increases
  • B it stays the same
  • C it decreases
  • D it becomes zero

Model answer

C - the acceleration decreases.

Explanation

Rearranging F = m × a gives a = F ÷ m. With the same accelerating force, increasing the mass makes the acceleration smaller. The acceleration does not drop to zero, because the hanging masses still provide a resultant force.

Mark scheme
  1. 1 mark

    C / it decreases

    The only correct answer is C: the same force gives a smaller acceleration to a larger mass (F = m × a, so a = F ÷ m). A is not correct because a larger mass is harder to speed up, not easier (it is a common mistake to think that a heavier trolley goes faster down the ramp); B is not correct because the acceleration depends on the mass as well as on the force; D is not correct because there is still a resultant force on the trolley, so it still accelerates, only less. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

Nia's trolley is pulled by a string that passes over a pulley to a hanger of slotted masses. The hanger and slotted masses have a total mass of 70 g.

The accelerating force on the trolley is the weight of the hanger and slotted masses.

Calculate the accelerating force.

(gravitational field strength, g = 10 N/kg)

Model answer

weight = mass × gravitational field strength
mass = 70 g = 0.070 kg
W = 0.070 × 10 = 0.70 N

Explanation

The accelerating force is the weight of the hanging masses, so use W = m × g. The mass must be in kilograms: divide 70 g by 1000 to get 0.070 kg. Forgetting to convert gives 700 N, which is far too big for a hanger of small slotted masses.

Mark scheme
  1. 1 mark

    substitution with the mass in kg: (W =) 0.070 × 10; or a correct final answer of 0.70 N with no working

    An answer of 0.70 N with no working scores 2 marks. allow 70 × 10 (mass not converted to kilograms) for this mark only: an answer of 700 (N) scores 1 mark. Dividing instead of multiplying (70 ÷ 10 = 7 or 0.070 ÷ 10 = 0.007) is a wrong method and scores 0.

  2. 1 mark

    evaluation: 0.70 (N)

    accept 0.7 (N). Ignore units.

Question 3

2 marks

Bethan uses two light gates and a data logger to measure the acceleration of a trolley. The data logger works out the speed of the trolley at each light gate from the length of the card on the trolley, which Bethan types in.

She types in 5.0 cm, but the card is really 4.0 cm long.

Explain how this mistake affects the speeds and the accelerations that the data logger gives.

Model answer

The data logger works out each speed as card length ÷ time. It uses 5.0 cm instead of 4.0 cm, so every speed it gives is 1.25 times too big. The acceleration is the change in speed ÷ time, so all the accelerations are also 1.25 times too big. The mistake affects every run in the same way.

Explanation

The times measured by the light gates are correct, but each speed is calculated from a card length that is too long, so every speed is too big. Because both speeds are too big by the same factor, the change in speed and the acceleration are too big by that factor too. An error that shifts every result in the same way is a systematic error; repeating the runs does not remove it.

Mark scheme
  1. 1 mark

    every speed is too big (1.25 times too big / 25% too big) because speed = length of card ÷ time and the length used is too big

    An explanation linking MP1 and MP2. accept 'the speeds are all too high because it thinks the card is longer than it is'. Do not accept 'the speeds are wrong' or 'inaccurate' with no direction.

  2. 1 mark

    so the change in speed and the acceleration are too big as well (by the same factor, for every run)

    accept 'all the accelerations are 1.25 times too big' or 'the error is the same in every run (a systematic error)'. Do not accept 'the accelerations are too small'. Ignore 'the time is wrong' (the times are measured correctly).

Question 4

4 marks

Zara's trolley, the masses on it and the hanging masses have a total mass of 0.75 kg. Her ramp is tilted to compensate for friction. With an accelerating force of 0.30 N, the acceleration of the trolley is 0.40 m/s².

For her next run, Zara makes two changes:
- she doubles the accelerating force by moving some slotted masses from the trolley to the hanger (this does not change the total mass)
- she then puts an extra 0.45 kg mass on the trolley.

Calculate the acceleration of the trolley in her next run.

Use the equation

F = m × a

Model answer

New accelerating force = 2 × 0.30 = 0.60 N
New total mass = 0.75 + 0.45 = 1.20 kg
F = m × a, so a = F ÷ m = 0.60 ÷ 1.20 = 0.50 m/s²

Explanation

Work out the new accelerating force and the new total mass first, then use a = F ÷ m. Moving slotted masses from the trolley to the hanger changes the accelerating force without changing the total mass, but the extra 0.45 kg does change the total mass. Common mistakes are doubling the force but forgetting the extra mass (0.80 m/s²) and using only the extra 0.45 kg as the mass.

Mark scheme
  1. 1 mark

    (new accelerating force =) 2 × 0.30 = 0.60 (N); or a correct final answer of 0.50 m/s² with no working

    An answer of 0.50 m/s² with no working scores 4 marks. A correct proportion method also scores 4 marks: the force is doubled and the total mass becomes 1.20 ÷ 0.75 = 1.6 times bigger, so a = 0.40 × 2 ÷ 1.6 = 0.50 m/s². 0.80 m/s² (force doubled but the extra mass left out: 0.60 ÷ 0.75) scores marking points 1 and 3; 0.25 m/s² (extra mass added but force not doubled: 0.30 ÷ 1.20) scores marking points 2 and 3; 1.3 m/s² (0.60 ÷ 0.45, using only the extra mass) scores marking points 1 and 3.

  2. 1 mark

    (new total mass =) 0.75 + 0.45 = 1.20 (kg); or a correct final answer of 0.50 m/s² with no working

    Accept 1.2 kg.

  3. 1 mark

    substitution or rearrangement: 0.60 = 1.20 × a / (a =) 0.60 ÷ 1.20; or a correct final answer of 0.50 m/s² with no working

    allow ecf: their new force ÷ their new total mass.

  4. 1 mark

    evaluation: 0.50 (m/s²)

    Accept 0.5 m/s². Ignore units.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.