Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Chemistry (Paper 2) Smart practice A mixed round aimed at your weak spots
Unit 4
Predicting and identifying reactions and products
Unit 5
Monitoring and controlling chemical reactions
Unit 6
Global challenges
Unit 7
Practical skills
Avg
score:
–
Topics
done:
0/34

Transition metals and their compounds

Practise 10 exam-style questions on Transition metals and their compounds for OCR GCSE Chemistry (Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 10 questions
  • 1–4 marks each
  • Instant marking
  • No sign-up needed
10 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Chromium is a transition metal. It is used to make stainless steel.

Which of these is most likely to be the melting point of chromium?

Choose your answer.

  • A 1907 °C
  • B 660 °C
  • C 181 °C
  • D 98 °C

Model answer

A

Explanation

Transition metals such as chromium, iron and titanium have high melting points, usually above 1000 °C, because of their strong metallic bonding. Group 1 metals such as lithium and sodium melt at much lower temperatures (sodium melts below 100 °C). So the highest temperature in the list is the most likely melting point for chromium.

Mark scheme
  1. 1 mark

    A / 1907 °C

    The only correct answer is A: transition metals have high melting points, often well over 1000 °C, and chromium melts at 1907 °C. B is not correct because 660 °C is the melting point of aluminium, a metal in Group 3; C is not correct because 181 °C is the melting point of lithium, a Group 1 metal; D is not correct because 98 °C is the melting point of sodium, a Group 1 metal. Low melting points are typical of Group 1 metals, not of transition metals. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

Some metals react with substances in the air and go dull.

• A freshly cut piece of lithium is shiny, but it goes dull within a few seconds.
• A new silver necklace stays shiny for weeks, but after some months it slowly turns dark.
• A gold ring stays shiny for hundreds of years.

Lithium is a Group 1 metal. Silver and gold are transition metals.

A student says: 'Transition metals do not react with the air.'

Use the information to explain whether the student is correct.

Model answer

The student is not correct. Silver is a transition metal, and it does react with substances in the air, because it slowly turns dark. Transition metals are much less reactive than Group 1 metals: silver takes months to change, but lithium goes dull in a few seconds. Gold does not react at all, so the statement is true only for some transition metals.

Explanation

Transition metals are much less reactive than Group 1 metals, but that does not mean that none of them react. Silver reacts slowly with substances in the air and tarnishes, while gold does not react at all. A good answer uses the information as evidence and compares the times: seconds for lithium, months for silver.

Mark scheme
  1. 1 mark

    the student is not (completely) correct: silver is a transition metal and it does react (with substances in the air), because it slowly turns dark

    1 mark for each of points 1 to 3, max 2. A bare 'yes' or 'no' scores 0. ALLOW silver tarnishes / goes dull, so some transition metals do react with the air.

  2. 1 mark

    transition metals react much more slowly than Group 1 metals: silver takes months to turn dark, but lithium goes dull in seconds

    The comparison with lithium (or Group 1 metals) is needed. ALLOW ORA (allow the reverse argument): lithium / Group 1 metals react much faster than silver. ALLOW transition metals are less reactive than Group 1 metals, with a time from the information.

  3. 1 mark

    gold does not react (it stays shiny for hundreds of years), so the statement is true for some transition metals only

    ALLOW gold supports the statement but silver does not.

Question 3

3 marks

Transition metals and their compounds have properties that make them useful. Silver, cobalt and tungsten are transition metals.

Use 1: Ethene and oxygen react to make epoxyethane, which is used to make antifreeze. The gases are passed over silver at about 250 °C. Without the silver, the reaction is far too slow.

Use 2: A small amount of cobalt oxide is added to melted glass to make blue glass.

Use 3: Some darts are made mainly of tungsten. A tungsten dart is much thinner than a brass dart of the same mass.

For each use, give the property of transition metals or their compounds that the use depends on.

Model answer

Use 1: silver acts as a catalyst - it speeds up the reaction without being used up.
Use 2: compounds of transition metals are coloured, so cobalt oxide colours the glass blue.
Use 3: tungsten has a very high density, so a small, thin dart still has a large mass.

Explanation

Typical properties of transition metals are high melting points, high densities and low reactivity; their compounds are often coloured, and the metals and their compounds are often good catalysts. Silver speeds up the reaction without being used up, so it is a catalyst. Cobalt compounds give the blue colour, and tungsten's high density means that a dart of a set mass can be made small and thin.

Mark scheme
  1. 1 mark

    Use 1: (silver is a) catalyst / it speeds up the reaction (without being used up)

    Each use is marked on its own: 1 mark for each of points 1 to 3. ALLOW transition metals are (good) catalysts / have catalytic activity. IGNORE high melting point. DO NOT ALLOW silver reacts with the ethene / silver is a reactant.

  2. 1 mark

    Use 2: (transition metal) compounds are coloured / form coloured compounds / form coloured ions

    ALLOW cobalt compounds are coloured / cobalt oxide is blue / cobalt ions are blue. DO NOT ALLOW the metal (cobalt) is coloured / the metal is shiny.

  3. 1 mark

    Use 3: (tungsten / transition metals have a) high density

    ALLOW tungsten is (very) dense / has a large mass for its volume / a small volume of tungsten has a large mass. IGNORE heavy on its own, strong, hard. DO NOT ALLOW low density.

Question 4

3 marks

The list shows the catalysts used to make four products.

• Ammonia is made using iron.
• Sulfuric acid is made using vanadium(V) oxide.
• Nitric acid is made using a mesh of platinum and rhodium.
• Ethanol is made from sugar using enzymes in yeast.

Iron, vanadium, platinum and rhodium are transition metals.

A student says: 'Only transition metals can be catalysts.'

Use the information to explain why the student is wrong.

Give one conclusion about transition metals that the information does support.

Model answer

The student is wrong because vanadium(V) oxide is a catalyst, but it is a compound of a transition metal, not the metal itself. Also, the enzymes in yeast are catalysts, and they are not transition metals at all - enzymes are biological catalysts.

The information does support the conclusion that transition metals and their compounds are often used as catalysts: three of the four catalysts are transition metals or contain them.

Explanation

One counter-example is enough to show that the word 'only' is wrong, and the list has two: a compound of a transition metal (vanadium(V) oxide) and enzymes, which are biological catalysts. The list does show that transition metals and their compounds are very often used as catalysts in industry, which is one of their typical properties.

Mark scheme
  1. 1 mark

    vanadium(V) oxide is a compound (of a transition metal), not a metal / element, so compounds of transition metals can also be catalysts

    Points 1 and 2 are for why the student is wrong and point 3 is for the conclusion: 1 mark for each point. For point 3, if more than one answer is given, a wrong one cancels a right one. ALLOW vanadium(V) oxide is not a metal but it is a catalyst. IGNORE vanadium is a transition metal on its own.

  2. 1 mark

    enzymes are (biological) catalysts that are not transition metals / are not metals

    ALLOW yeast / enzymes speed up the reaction but contain no transition metal (element). ALLOW enzymes are proteins. DO NOT ALLOW yeast is a transition metal.

  3. 1 mark

    transition metals (and their compounds) are often / commonly used as catalysts / many industrial catalysts are transition metals or their compounds

    ALLOW transition metals can be catalysts / three of the four catalysts contain transition metals. IGNORE conclusions about properties not shown in the information, such as high melting point.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.