Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Chemistry (Paper 2) Smart practice A mixed round aimed at your weak spots
Unit 4
Predicting and identifying reactions and products
Unit 5
Monitoring and controlling chemical reactions
Unit 6
Global challenges
Unit 7
Practical skills
Avg
score:
–
Topics
done:
0/34

Extracting metals using carbon

Practise 14 exam-style questions on Extracting metals using carbon for OCR GCSE Chemistry (Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 14 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
14 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Copper, lead and zinc are non-ferrous metals: they are metals other than iron.

The list shows some metals and carbon in order of reactivity, most reactive first:

magnesium, aluminium, carbon, zinc, iron, lead, copper

Which statement about copper, lead and zinc is correct?

Choose your answer.

  • A They all contain some iron.
  • B They all react quickly with cold water.
  • C They are all above carbon in the reactivity series.
  • D They can all be extracted from their oxides using carbon.

Model answer

D

Explanation

Find carbon in the list: every metal below it, including zinc, iron, lead and copper, can be extracted by heating its oxide with carbon. 'Non-ferrous' simply means that the metal is not iron. Metals above carbon, such as aluminium and magnesium, need electrolysis.

Mark scheme
  1. 1 mark

    D / They can all be extracted from their oxides using carbon.

    The only correct answer is D: copper, lead and zinc are all below carbon in the reactivity series, so carbon can remove the oxygen from their oxides. A is not correct because non-ferrous metals are metals other than iron; B is not correct because none of these metals reacts quickly with cold water (they are much less reactive than calcium or sodium); C is not correct because all three are below carbon in the list. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

Most iron is extracted by heating iron oxide with carbon. One overall equation for this is:

2Fe₂O₃ + 3C → 4Fe + 3CO₂

In 2021, a company in Sweden made steel from iron that had been extracted from iron oxide using hydrogen instead of carbon:

Fe₂O₃ + 3H₂ → 2Fe + 3H₂O

Suggest why steel companies want to extract iron using hydrogen instead of carbon. Use the equations.

Model answer

When carbon is used, carbon dioxide is made, but when hydrogen is used the other product is water, so no carbon dioxide is made. Carbon dioxide is a greenhouse gas that causes global warming, so extracting iron with hydrogen would reduce the steel industry's effect on climate change.

Explanation

Compare the products of the two equations: carbon ends up as carbon dioxide, a greenhouse gas, while hydrogen ends up as water. Both hydrogen and carbon remove the oxygen from iron oxide. For the hydrogen method to help, the hydrogen itself must be made without fossil fuels, for example using electricity from renewable sources.

Mark scheme
  1. 1 mark

    with hydrogen, the other product is water (H₂O) / no carbon dioxide is made

    ALLOW using carbon makes carbon dioxide, but using hydrogen makes water (steam). The answer must use the products shown in the equations.

  2. 1 mark

    carbon dioxide is a greenhouse gas / causes global warming / climate change, so using hydrogen reduces the effect on the climate

    ALLOW less carbon dioxide (greenhouse gas) is released into the atmosphere. IGNORE pollution / better for the environment unless carbon dioxide, greenhouse gases or global warming are named. IGNORE hydrogen is cheaper. DO NOT ALLOW carbon dioxide causes acid rain / damages the ozone layer (CON).

Question 3

2 marks

Before 1709, iron in Britain was extracted by heating iron ore with charcoal. Charcoal is made by heating wood. In 1709, the ironmaker Abraham Darby began to use coke instead. Coke is made by heating coal.

Charcoal and coke are both mainly carbon, so both of them can remove the oxygen from iron oxide.

Suggest two reasons why ironmakers changed from charcoal to coke.

Model answer

Wood was running out because so many forests had been cut down to make charcoal, so charcoal was scarce and expensive. Coal was plentiful in Britain, so coke could be made cheaply and in large amounts.

Explanation

Both fuels are mostly carbon, so the chemistry of the extraction is the same: carbon is more reactive than iron and removes its oxygen. The change was about the availability and cost of the raw material, which is an important principle in choosing any industrial process.

Mark scheme
  1. 1 mark

    wood was running out / there was not enough wood to make charcoal / forests were being cut down

    1 mark for each of any two of points 1 to 3, max 2. If more than two answers are given, a wrong one cancels a right one. ALLOW charcoal was becoming expensive / scarce.

  2. 1 mark

    coal was plentiful / there was a lot of coal (in Britain) / coal (coke) was cheaper

    ALLOW coke could be made in large amounts.

  3. 1 mark

    coke is stronger / harder than charcoal, so it is not crushed in a taller furnace / bigger furnaces could make more iron

    ALLOW more iron could be made at a time. IGNORE coke is better / works better on its own. IGNORE coke contains more carbon unless it is linked to an advantage.

Question 4

4 marks

A mining company extracts copper from an ore that contains 0.50 % copper by mass.

Calculate the mass of ore that must be mined to obtain 1.0 tonne of copper.

Calculate the mass of waste rock left over from this ore.

Suggest one environmental problem caused by mining copper from this ore.

Model answer

Mass of ore = 1.0 ÷ 0.50 × 100 = 200 tonnes
Mass of waste rock = 200 − 1.0 = 199 tonnes
One problem: the 199 tonnes of waste rock for every tonne of copper make huge waste heaps, which take up land and spoil the landscape.

Explanation

0.50 % means 0.50 tonnes of copper in every 100 tonnes of ore, so 1.0 tonne of copper needs twice as much ore: 200 tonnes. Almost all of it, 199 tonnes, is waste. Low-grade ores mean that huge amounts of rock must be dug up, moved and processed for a small amount of metal.

Mark scheme
  1. 1 mark

    1.0 ÷ 0.50 × 100 / 1.0 ÷ 0.0050 / 100 ÷ 0.50; or a correct final answer of 200 tonnes with no working

    An answer of 200 tonnes (for the ore) with no working scores marking points 1 and 2 only. Point 3 is for the waste rock and points 4 to 8 are for the environmental problem: 1 mark for any one of points 4 to 8, max 1. If more than one answer is given, a wrong one cancels a right one. DO NOT ALLOW 0.0050 tonnes (1.0 × 0.50 ÷ 100) or 2 tonnes (1.0 ÷ 0.50) for points 1 and 2.

  2. 1 mark

    evaluation: 200 (tonnes); or a correct final answer of 200 tonnes with no working

    IGNORE units.

  3. 1 mark

    waste rock = 200 − 1.0 = 199 (tonnes)

    ALLOW ECF from a wrong mass of ore (mass of ore − 1.0). DO NOT ALLOW 200 tonnes for this point (the copper must be taken away).

  4. 1 mark

    large heaps / tips of waste rock take up land / spoil the landscape

    ALLOW the waste has to be disposed of / stored somewhere.

  5. 1 mark

    large mines / quarries / holes destroy habitats / the landscape

    ALLOW wildlife loses its home.

  6. 1 mark

    digging, crushing, moving and heating so much rock uses a lot of energy (fossil fuels), which releases carbon dioxide / causes global warming

    ALLOW lots of fuel is burned by the machines and lorries.

  7. 1 mark

    dust / noise (from mining and lorries)

    ALLOW air pollution from dust.

  8. 1 mark

    waste rock or mine water can pollute rivers / water / soil (with toxic metal compounds)

    IGNORE pollution on its own.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.