Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Chemistry (Paper 2) Smart practice A mixed round aimed at your weak spots
Unit 4
Predicting and identifying reactions and products
Unit 5
Monitoring and controlling chemical reactions
Unit 6
Global challenges
Unit 7
Practical skills
Avg
score:
–
Topics
done:
0/34

Tests for gases, cations and anions, and flame tests

Practise 15 exam-style questions on Tests for gases, cations and anions, and flame tests for OCR GCSE Chemistry (Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A student adds a few drops of sodium hydroxide solution to a solution of an iron compound. A precipitate forms. The formula of the precipitate is Fe(OH)₂.

Hydroxide ions have the formula OH⁻.

Which option gives the charge on the iron ions in the precipitate and the colour of the precipitate?

Choose your answer.

  • A 2+ and blue
  • B 2+ and green
  • C 3+ and green
  • D 3+ and orange-brown

Model answer

B

Explanation

An ionic compound has no overall charge, so the charges on its ions must cancel out. In Fe(OH)₂, two OH⁻ ions have a total charge of 2−, so each iron ion is Fe²⁺. Iron(II) ions give a green precipitate with sodium hydroxide solution, while iron(III) ions give an orange-brown precipitate, Fe(OH)₃.

Mark scheme
  1. 1 mark

    B / 2+ and green

    The only correct answer is B: the precipitate has no overall charge, and two OH⁻ ions (a total charge of 2−) balance one iron ion, so the iron ions are Fe²⁺; iron(II) ions give a green precipitate with sodium hydroxide solution. A is not correct because a blue precipitate shows copper(II) ions, not iron(II) ions; C is not correct because an Fe³⁺ ion would need three OH⁻ ions to balance it, and the green precipitate is made by iron(II) ions; D is not correct because the orange-brown precipitate is made by iron(III) ions and has three OH⁻ ions for each iron ion, Fe(OH)₃. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A student needs some limewater to test a gas for carbon dioxide. The bottle of limewater has been left open on the bench for a week. When she pours some limewater into a test tube, it is already slightly milky.

Suggest why the limewater is already milky.

Explain why she should not use this limewater for the test.

Model answer

Air contains a small amount of carbon dioxide. While the bottle was open, carbon dioxide from the air reacted with the limewater and turned it slightly milky.
If she uses this limewater, it is already milky before the test, so she could not tell whether her gas turns it milky. The result could wrongly suggest that the gas is carbon dioxide, so she should use fresh, clear limewater.

Explanation

The test for carbon dioxide works because carbon dioxide turns clear limewater milky. Limewater left open slowly reacts with the small amount of carbon dioxide in the air. A test is only useful if it starts from a clear result, so that a change can be seen; old milky limewater could give a false positive.

Mark scheme
  1. 1 mark

    carbon dioxide from the air has reacted with / dissolved in the limewater (while the bottle was open)

    ALLOW the air contains (a small amount of) carbon dioxide, which has turned the limewater milky. DO NOT ALLOW oxygen from the air has made it milky.

  2. 1 mark

    she would not be able to tell whether the gas she tests turns the limewater milky / the test could give a false positive result for carbon dioxide

    ALLOW it is already milky, so a milky result would not show that the gas is carbon dioxide. ALLOW she should use fresh limewater (from a closed bottle) so that a change can be seen, if linked to the test result.

Question 3

2 marks

Two students each test a sample of the same colourless solution with sodium hydroxide solution. The solution contains either calcium ions or zinc ions.

• Student 1 records: 'White precipitate.'
• Student 2 records: 'White precipitate, which then disappears.'

Both students recorded correctly what they saw.

Explain how this is possible, and identify the metal ion in the solution.

Model answer

Student 1 added only a few drops of sodium hydroxide solution, so the white precipitate formed and stayed. Student 2 kept adding sodium hydroxide until it was in excess, and the precipitate dissolved.
The metal ion is zinc, because the white precipitate dissolves in excess sodium hydroxide; the white precipitate from calcium ions would not dissolve.

Explanation

Calcium ions and zinc ions both give a white precipitate with a few drops of sodium hydroxide solution. Only the zinc precipitate dissolves when more sodium hydroxide is added, so the test must be carried on until the sodium hydroxide is in excess. The two records describe different stages of the same test.

Mark scheme
  1. 1 mark

    student 2 added more / an excess of sodium hydroxide solution, but student 1 added only a few drops

    ALLOW student 1 stopped adding sodium hydroxide solution before it was in excess. IGNORE student 2 waited longer.

  2. 1 mark

    zinc (ions) / Zn²⁺, because the white precipitate dissolves in excess sodium hydroxide (but a calcium precipitate would not)

    ALLOW zinc identified without a reason if point 1 explains that the precipitate dissolves in excess. DO NOT ALLOW calcium. DO NOT ALLOW both zinc and calcium.

Question 4

4 marks

A student has solid samples of three compounds. She does a flame test on each solid. She also dissolves each solid in distilled water and tests the solution with:
• sodium hydroxide solution (a few drops, then an excess)
• dilute nitric acid and then silver nitrate solution
• dilute hydrochloric acid and then barium chloride solution.

The table shows her results. Four of the results are shown by the letters W, X, Y and Z.

Give the results W, X, Y and Z.

Table with columns "Compound", "Flame test", "Sodium hydroxide", "Acidified silver nitrate", "Acidified barium chloride". Compound: copper(II) sulfate; Flame test: W; Sodium hydroxide: blue precipitate; Acidified silver nitrate: no change; Acidified barium chloride: white precipitate | Compound: calcium chloride; Flame test: orange-red flame; Sodium hydroxide: X; Acidified silver nitrate: white precipitate; Acidified barium chloride: no change | Compound: lithium bromide; Flame test: Y; Sodium hydroxide: no change; Acidified silver nitrate: Z; Acidified barium chloride: no change.

Model answer

W: blue-green flame
X: white precipitate, which does not dissolve in excess sodium hydroxide
Y: red (crimson) flame
Z: cream precipitate

Explanation

Each test picks out one kind of ion. Flame tests identify metal ions: copper gives blue-green and lithium gives red. Sodium hydroxide gives a white precipitate with calcium ions that does not dissolve in excess (a zinc precipitate would dissolve). Acidified silver nitrate identifies halide ions, and bromide ions give a cream precipitate of silver bromide (chloride gives white and iodide gives yellow).

Mark scheme
  1. 1 mark

    W: blue-green (flame)

    1 mark for each of points 1 to 4. ALLOW green-blue / turquoise / green / blue. DO NOT ALLOW red, orange-red, lilac or yellow.

  2. 1 mark

    X: white precipitate (which does not dissolve in excess sodium hydroxide)

    ALLOW white solid / milky white cloudiness. DO NOT ALLOW a white precipitate that dissolves in excess. DO NOT ALLOW any other colour of precipitate.

  3. 1 mark

    Y: red (flame)

    ALLOW crimson. DO NOT ALLOW orange-red, lilac, yellow or blue-green.

  4. 1 mark

    Z: cream precipitate

    ALLOW off-white / pale yellow-white precipitate. DO NOT ALLOW white or yellow precipitate. The word 'precipitate' (or solid) is needed: DO NOT ALLOW cream solution.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.