Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Chemistry (Paper 2) Smart practice A mixed round aimed at your weak spots
Unit 4
Predicting and identifying reactions and products
Unit 5
Monitoring and controlling chemical reactions
Unit 6
Global challenges
Unit 7
Practical skills
Avg
score:
–
Topics
done:
0/34

Theoretical mass, percentage yield and atom economy

Practise 15 exam-style questions on Theoretical mass, percentage yield and atom economy for OCR GCSE Chemistry (Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Titanium can be made by heating titanium(IV) chloride with sodium.

TiCl₄ + 4Na → Ti + 4NaCl

Titanium is the desired product.

Relative atomic mass (Ar): Ti = 47.9
Relative formula mass (Mr): TiCl₄ = 189.9 NaCl = 58.5

Use the equation: atom economy = (Mr of desired product ÷ total Mr of all products) × 100

Which calculation gives the atom economy for making titanium?

Choose your answer.

  • A (47.9 ÷ (47.9 + 4 × 58.5)) × 100
  • B (47.9 ÷ 189.9) × 100
  • C (47.9 ÷ (47.9 + 58.5)) × 100
  • D (4 × 58.5 ÷ (47.9 + 4 × 58.5)) × 100

Model answer

A - (47.9 ÷ (47.9 + 4 × 58.5)) × 100

Explanation

The total Mr of all the products must use the numbers in the balanced equation: one Ti (47.9) and four NaCl (4 × 58.5 = 234.0), a total of 281.9. Only 47.9 of this is titanium, so the atom economy is 47.9 ÷ 281.9 × 100 = 17.0%. Leaving out the 4 in front of NaCl is the slip that gives option C. The total for the reactants, 189.9 + (4 × 23.0) = 281.9, is the same, because mass is conserved.

Mark scheme
  1. 1 mark

    A / (47.9 ÷ (47.9 + 4 × 58.5)) × 100

    The only correct answer is A: the products are one Ti and four NaCl, so the total Mr of all products is 47.9 + (4 × 58.5) = 281.9, and the atom economy is 47.9 ÷ 281.9 × 100 = 17.0%. B is not correct because it divides by the Mr of only one reactant, TiCl₄, instead of the total Mr of all the products (25.2%). C is not correct because it leaves out the 4 in front of NaCl in the equation (45.0%). D is not correct because it calculates the percentage of the mass that ends up in the waste product, sodium chloride (83.0%). ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

Hydrogen can be made by the electrolysis of water.

2H₂O → 2H₂ + O₂

Hydrogen is the desired product. The atom economy for making hydrogen by this reaction is 11.1%.

Explain what this value tells you about the reaction. Use the equation in your answer.

Model answer

An atom economy of 11.1% means that only 11.1% of the mass of the water ends up in the desired product, hydrogen. The other 88.9% of the mass ends up in the oxygen, which is not the desired product, so most of the atoms from the reactant are not in the product that is wanted.

Explanation

Atom economy compares the mass of the desired product with the total mass of all the products in the balanced equation. Here the products are 2 × 2.0 = 4.0 of hydrogen and 32.0 of oxygen, so 4.0 ÷ 36.0 × 100 = 11.1%. Atom economy is not the same as yield: it says nothing about how much water reacts or how much hydrogen is collected.

Mark scheme
  1. 1 mark

    only 11.1% of the (total) mass of the reactant / water (or of its atoms) ends up in the desired product, hydrogen

    ALLOW only a small fraction / about a ninth of the mass of the water ends up as hydrogen. DO NOT ALLOW only 11.1% of the water reacts / only 11.1% of the hydrogen is made / the yield is 11.1% (these confuse atom economy with yield).

  2. 1 mark

    the other 88.9% of the mass ends up in the oxygen (the other product, which is not the desired product)

    ALLOW 89%. ALLOW most of the mass (of the atoms) ends up as oxygen, a by-product / an unwanted product. ALLOW the oxygen is wasted unless it is used for something else. The answer must name oxygen (or O₂) or give 88.9% for this mark.

Question 3

2 marks

Zinc sulfate is used in some dietary supplements. A technician makes zinc sulfate by reacting zinc oxide with an excess of dilute sulfuric acid.

ZnO + H₂SO₄ → ZnSO₄ + H₂O

Relative formula mass (Mr): ZnO = 81.4 ZnSO₄ = 161.5

She needs 8.00 g of zinc sulfate. She has 5.00 g of zinc oxide. Assume that all of the zinc oxide reacts and none of the zinc sulfate is lost.

Use calculations to decide whether 5.00 g of zinc oxide is enough.

Model answer

From the equation, 81.4 g of ZnO makes 161.5 g of ZnSO₄.
Mass of ZnSO₄ that 5.00 g of ZnO can make = 5.00 × 161.5 ÷ 81.4 = 9.92 g
9.92 g is more than the 8.00 g she needs, so 5.00 g of zinc oxide is enough.

Explanation

One ZnO makes one ZnSO₄, so the masses are in the ratio of their relative formula masses, 81.4 : 161.5. Multiply the mass of zinc oxide by 161.5 ÷ 81.4 to find the most zinc sulfate it can make, then compare this with the 8.00 g needed. Zinc sulfate has a bigger mass than the zinc oxide it is made from, because it also contains atoms from the sulfuric acid, so comparing 5.00 g directly with 8.00 g, or dividing the other way (2.52 g), gives the wrong decision.

Mark scheme
  1. 1 mark

    theoretical mass of zinc sulfate from 5.00 g of zinc oxide = 5.00 × 161.5 ÷ 81.4 = 9.92 (g); or a correct final answer of 9.92 g (or 9.9 g) with no working

    A decision with no calculation scores 0. An answer of 9.92 g (or 9.9 g) with no working scores marking point 1, and the decision in point 2 can then be awarded. ALLOW 9.920 g. ALLOW the reverse calculation: mass of zinc oxide needed for 8.00 g of zinc sulfate = 8.00 × 81.4 ÷ 161.5 = 4.03 g (or 4.0 g or 4.032 g). DO NOT ALLOW 5.00 × 81.4 ÷ 161.5 (= 2.52 g, the ratio upside down) or a direct comparison of 5.00 g with 8.00 g (the mass of zinc oxide taken to be the mass of zinc sulfate) for this mark.

  2. 1 mark

    yes, 5.00 g of zinc oxide is enough, because it can make 9.92 g of zinc sulfate, which is more than the 8.00 g needed / because only 4.03 g of zinc oxide is needed, which is less than 5.00 g

    The decision must follow from the correct calculation in point 1. DO NOT ALLOW 'no, it is not enough' (this comes from the ratio upside down, 2.52 g, or from comparing 5.00 g with 8.00 g). IGNORE comments that the yield would be less than 100% in practice.

Question 4

4 marks

A student heats 0.30 g of magnesium ribbon in a crucible with a lid. The magnesium reacts with oxygen from the air to form magnesium oxide.

2Mg + O₂ → 2MgO

Relative atomic mass (Ar): O = 16.0 Mg = 24.3

From time to time she lifts the lid a little to let more air in. Each time, a little white smoke escapes from the crucible.

At the end, the mass of magnesium oxide in the crucible is 0.42 g.

Calculate the percentage yield of magnesium oxide.

Use the information to suggest why her percentage yield is less than 100%.

Model answer

Mr of MgO = 24.3 + 16.0 = 40.3
From the equation, 2 × 24.3 = 48.6 g of Mg makes 2 × 40.3 = 80.6 g of MgO, so the masses are in the ratio 24.3 : 40.3.
Theoretical mass of MgO = 0.30 × 40.3 ÷ 24.3 = 0.4975 g
Percentage yield = 0.42 ÷ 0.4975 × 100 = 84.4%
The white smoke that escaped when she lifted the lid was magnesium oxide, so some of the product was lost and less was left in the crucible to weigh.

Explanation

First find the theoretical mass from the ratio of the formula masses in the balanced equation (the 2s cancel, so 24.3 g of Mg makes 40.3 g of MgO), then use percentage yield = (actual yield ÷ theoretical yield) × 100. The white smoke is solid magnesium oxide; any that escapes is product that is not weighed. Lifting the lid only a little, and only for a moment, keeps this loss small.

Mark scheme
  1. 1 mark

    Mr of MgO = 24.3 + 16.0 = 40.3 / 48.6 g of Mg makes 80.6 g of MgO; or a correct final answer of 84% (any value from 84.0% to 84.5%) with no working

    An answer of 84% (any value from 84.0% to 84.5%) with no working scores marking points 1 to 3 only. ALLOW this mark if 40.3 is used correctly in the calculation. ALLOW ECF from a wrong Mr in points 2 and 3.

  2. 1 mark

    theoretical mass of MgO = 0.30 × 40.3 ÷ 24.3 = 0.4975 (g); or a correct final answer of 84% (any value from 84.0% to 84.5%) with no working

    ALLOW 0.498 / 0.50 (g). DO NOT ALLOW 0.30 × 24.3 ÷ 40.3 (= 0.18 g, the ratio upside down) for this mark.

  3. 1 mark

    percentage yield = 0.42 ÷ 0.4975 × 100 = 84.4 (%)

    ALLOW any value from 84.0 to 84.5 (%) (a theoretical mass rounded to 0.50 g gives 84.0%). ALLOW ECF from a wrong theoretical mass. IGNORE units.

  4. 1 mark

    (some of) the magnesium oxide / product escaped as the white smoke (when the lid was lifted), so less magnesium oxide was left in the crucible to weigh

    ALLOW the white smoke is magnesium oxide, so some of the product was lost. The answer must use the information about the white smoke. IGNORE spillage / human error / the reaction was not complete (unqualified).

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.