Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Physics (Paper 4) Smart practice A mixed round aimed at your weak spots
Unit 5
Waves in matter
Unit 6
Radioactivity
Unit 7
Energy
Unit 8
Global challenges
Unit 9
Practical skills
Avg
score:
–
Topics
done:
0/33

Sound waves at boundaries, the ear and hearing

Practise 15 exam-style questions on Sound waves at boundaries, the ear and hearing for OCR GCSE Physics (Paper 4). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

In a factory, steel bars are checked for faults in a tank of water. A probe in the water sends a pulse of ultrasound towards a steel bar. The pulse meets the flat surface of the bar at right angles.

Ultrasound travels at about 1500 m/s in water and at about 5900 m/s in steel.

Which statement describes what happens to the ultrasound at the surface of the bar?

Choose your answer.

  • A All of the ultrasound is reflected back into the water, because ultrasound cannot travel through a solid such as steel.
  • B Part of the ultrasound is reflected and part is transmitted into the steel, where it travels faster.
  • C The ultrasound is transmitted into the steel with a higher frequency.
  • D The ultrasound is transmitted into the steel, where its wavelength is shorter.

Model answer

B

Explanation

When a wave meets a boundary between two materials, part of it is reflected, part is transmitted and part may be absorbed. The transmitted ultrasound keeps the same frequency, so in the steel, where it is about four times faster, its wavelength is about four times longer. The reflected part is what the probe detects as an echo from the surface of the bar, and the transmitted part can produce echoes from faults inside it.

Mark scheme
  1. 1 mark

    B / part of the ultrasound is reflected and part is transmitted into the steel, where it travels faster

    The only correct answer is B: at a boundary between two materials, part of a wave is reflected and part is transmitted; the transmitted ultrasound travels faster in the steel (5900 m/s compared with 1500 m/s). A is not correct because sound and ultrasound can travel through solids (faster than through liquids); C is not correct because the frequency does not change at a boundary; D is not correct because the speed increases while the frequency stays the same, so the wavelength becomes longer, not shorter. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

The fog horn on a lighthouse gives out a very loud sound through the air. When this sound reaches the surface of the sea, only about 0.1% of its energy passes into the water.

A diver under the water near the lighthouse can only just hear the fog horn. She can clearly hear the engine of a small boat further away, even though in the air the engine sounds much quieter than the fog horn. The engine is bolted to the hull of the boat and makes the hull vibrate. The hull is in contact with the water.

Explain these observations.

Model answer

When the sound of the fog horn reaches the surface of the sea, almost all of it (about 99.9% of the energy) is reflected back into the air at the boundary between the air and the water. Only about 0.1% is transmitted into the water, so very little energy reaches the diver and she can only just hear it.

The engine makes the hull vibrate, and the hull is in contact with the water, so its vibrations make the water vibrate directly. This sound is produced in the water and does not have to cross the boundary between the air and the water, so much more of its energy reaches the diver, even though the engine sounds quieter in the air.

Explanation

When a sound wave meets a boundary between two very different materials, such as air and water, most of it is reflected and only a small fraction is transmitted. A vibrating solid in contact with the water, such as a boat's hull, passes its vibrations straight into the water, so it is a much better source of underwater sound. A common error is to say that the fog horn is quiet under water because sound cannot travel through water: sound travels well in water, but very little of it gets in from the air.

Mark scheme
  1. 1 mark

    (almost) all of the sound of the fog horn (about 99.9% of its energy) is reflected at the boundary between the air and the sea, so very little of its energy is transmitted into the water to reach the diver

    ALLOW 'the surface of the sea reflects most of the sound back into the air'. The idea of reflection at the surface of the sea (the boundary between the air and the water) is needed: 'the sound cannot get into the water' on its own does not score. IGNORE references to the speed of sound in water.

  2. 1 mark

    the vibrating hull is in contact with the water, so its vibrations pass straight into the water as sound waves / the engine's sound is produced in the water and does not have to cross the boundary between the air and the water, so much more of its energy reaches the diver

    ALLOW 'the hull makes the water vibrate directly'. The idea that the engine's sound does not have to pass from the air into the water (or that the vibrations pass from the hull straight into the water) is needed. DO NOT ALLOW 'sound travels faster in water, so it is louder' as the explanation.

Question 3

3 marks

An engineer checks a steel plate from a bridge for cracks. The plate is 40 mm thick. A probe on the top surface sends short pulses of ultrasound straight down into the steel and detects the echoes.

Where the plate has no crack, the only echo comes from the bottom surface of the plate. It is detected 13.6 μs after each pulse is sent.

At one place, an extra echo is detected 5.1 μs after the pulse is sent. It comes from a crack inside the plate.

Calculate the depth of the crack below the top surface of the plate. Give your answer in mm.

1 μs = 1 × 10⁻⁶ s

Model answer

The echo from the bottom surface travels 2 × 40 mm = 0.080 m in 13.6 × 10⁻⁶ s.
speed = distance ÷ time = 0.080 ÷ (13.6 × 10⁻⁶) = 5880 m/s
For the crack, the pulse travels down and back in 5.1 × 10⁻⁶ s, so
depth = speed × time ÷ 2 = 5880 × 5.1 × 10⁻⁶ ÷ 2 = 0.015 m = 15 mm

Explanation

Each echo time is for the journey down and back up, so the distance travelled is twice the depth. Because the speed in the steel is the same for both echoes, the depth is proportional to the echo time, so a quicker method is 40 × 5.1 ÷ 13.6 = 15 mm. Common errors are halving only one of the times, or giving the distance of the crack from the bottom surface (25 mm).

Mark scheme
  1. 1 mark

    speed of ultrasound in the steel = (2 × 0.040) ÷ (13.6 × 10⁻⁶) = 5900 m/s / the depth is proportional to the echo time: depth = 40 × (5.1 ÷ 13.6); or a correct final answer of 15 mm with no working

    An answer of 15 mm with no working scores 3 marks. ALLOW 5880 m/s / 5882 m/s. ALLOW distance = speed × time recalled in any form. ALLOW 2 marks for 25 mm (the distance of the crack above the bottom surface of the plate). ALLOW 1 mark for 30 mm (the echo time for the crack not halved). ALLOW 1 mark for 7.5 mm (the echo time for the bottom surface not halved when finding the speed).

  2. 1 mark

    depth = 5900 × 5.1 × 10⁻⁶ ÷ 2 / 40 × 5.1 ÷ 13.6; or a correct final answer of 15 mm with no working

    ALLOW 0.015 m at this stage. ALLOW ECF from an incorrect speed.

  3. 1 mark

    evaluation: 15 (mm)

    ALLOW 15.0 mm. ALLOW 0.015 m or 1.5 cm if the unit is given.

Question 4

5 marks

In the middle ear, three small bones called the ossicles connect the eardrum to the oval window. The oval window is a small membrane at the entrance to the liquid-filled cochlea.

• The area of the eardrum that vibrates is 55 mm².
• The area of the oval window is 3.2 mm².
• The ossicles act as a lever: the force they exert on the oval window is 1.3 times the force that the eardrum exerts on them.

A sound wave makes the pressure on the eardrum rise and fall by 0.020 Pa. Assume that all of the force on the eardrum is passed on to the ossicles.

Calculate how much the pressure on the oval window rises and falls. Explain why this increase in pressure is important for hearing.

Model answer

pressure = force ÷ area, so force = pressure × area
Force on the eardrum = 0.020 × 55 × 10⁻⁶ = 1.1 × 10⁻⁶ N
Force on the oval window = 1.3 × 1.1 × 10⁻⁶ = 1.43 × 10⁻⁶ N
Pressure on the oval window = 1.43 × 10⁻⁶ ÷ (3.2 × 10⁻⁶) = 0.45 Pa
This is about 22 times the pressure change at the eardrum. The cochlea is full of liquid, which is much harder to set vibrating than air. Without this increase, most of the sound energy would be reflected where the vibrations meet the liquid, so the vibrations in the cochlea would be too small for the hair cells to detect quiet sounds.

Explanation

The same force acting on a much smaller area gives a much larger pressure, and the lever action of the ossicles increases the force as well (17 × 1.3 is about 22 times in all). Keep the areas in the same units: converting both to m² or leaving both in mm² gives the same answer. Many answers forget the factor of 1.3 or divide the areas the wrong way round.

Mark scheme
  1. 1 mark

    recall: pressure = force ÷ area / force = pressure × area; or a correct final answer of 0.44 to 0.45 Pa with no working

    An answer from 0.44 to 0.45 Pa (or 0.4 Pa) with no working scores marking points 1 to 4. ALLOW the areas kept in mm² throughout, because the conversion cancels: 1.3 × 0.020 × 55 ÷ 3.2 = 0.45 Pa. ALLOW 3 marks for 0.34 Pa (the factor of 1.3 left out). ALLOW 3 marks for 0.0015 Pa (the two areas used the wrong way round).

  2. 1 mark

    force on the eardrum = 0.020 × 5.5 × 10⁻⁵ = 1.1 × 10⁻⁶ (N); or a correct final answer of 0.44 to 0.45 Pa with no working

    ALLOW 0.020 × 55 = 1.1 with the area left in mm², if the area of the oval window is also left in mm².

  3. 1 mark

    force on the oval window = 1.3 × 1.1 × 10⁻⁶ = 1.43 × 10⁻⁶ (N); or a correct final answer of 0.44 to 0.45 Pa with no working

    ALLOW 1.4 × 10⁻⁶ N. ALLOW ECF from marking point 2.

  4. 1 mark

    pressure on the oval window = 1.43 × 10⁻⁶ ÷ (3.2 × 10⁻⁶) = 0.45 (Pa)

    ALLOW 0.447 Pa / 0.44 Pa / 0.4 Pa. ALLOW ECF from marking points 2 and 3.

  5. 1 mark

    the cochlea is filled with liquid, and a larger pressure (force) is needed to make the liquid vibrate / without the increase, most of the energy of the sound would be reflected at the boundary between the air and the liquid, so sounds would be much quieter (harder to hear)

    ALLOW 'so that the vibrations in the cochlea are large enough to move the hair cells / to be detected'. DO NOT ALLOW 'to make the sound louder' with no reference to the liquid or to detection.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.