Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Physics (Paper 4) Smart practice A mixed round aimed at your weak spots
Unit 5
Waves in matter
Unit 6
Radioactivity
Unit 7
Energy
Unit 8
Global challenges
Unit 9
Practical skills
Avg
score:
–
Topics
done:
0/33

Reaction times and stopping distances

Practise 17 exam-style questions on Reaction times and stopping distances for OCR GCSE Physics (Paper 4). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 17 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
17 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A driver makes an emergency stop, braking as hard as she can without skidding. The road is dry.

Which value is closest to the deceleration of the car?

Choose your answer.

  • A 0.07 m/s²
  • B 0.7 m/s²
  • C 7 m/s²
  • D 70 m/s²

Model answer

C

Explanation

Hard braking on a dry road gives a deceleration of roughly 6 to 8 m/s², a little less than the acceleration of free fall (10 m/s²); normal, comfortable braking is about 2 to 3 m/s². A quick check is the time to stop: at 7 m/s² a car at 30 m/s stops in about 4 s, which matches everyday experience. Decelerations of tens or hundreds of m/s² happen only in collisions, and these are what cause injuries.

Mark scheme
  1. 1 mark

    C / 7 m/s²

    The only correct answer is C: braking as hard as possible on a dry road gives a deceleration of about 7 m/s², so a car travelling at 30 m/s stops in about 4 s. A and B are not correct because these decelerations are far too small: even at 0.7 m/s² a car travelling at 30 m/s would take more than 40 s and more than 600 m to stop; D is not correct because 70 m/s² is about seven times the acceleration of free fall - friction between the tyres and the road cannot give such a large force, and decelerations this large happen only in collisions. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A driving-simulator study measured the mean reaction time of drivers in four age groups. The table shows the results (illustrative data).

Calculate how much further a car travelling at 20 m/s goes during the mean reaction time of the over 65 group than during the mean reaction time of the 17 to 25 group.

Describe the pattern shown by the data.

Table with columns "Age group (years)", "Mean reaction time (s)". Age group (years): 17 to 25; Mean reaction time (s): 0.68 | Age group (years): 26 to 45; Mean reaction time (s): 0.71 | Age group (years): 46 to 65; Mean reaction time (s): 0.79 | Age group (years): over 65; Mean reaction time (s): 0.96.

Model answer

Extra distance = (0.96 − 0.68) × 20 = 0.28 × 20 = 5.6 m
The mean reaction time increases with age, and it increases more and more quickly for the older groups (by only 0.03 s between the two youngest groups, but by 0.17 s between the two oldest groups).

Explanation

Thinking distance = speed × reaction time, so the extra distance is the speed multiplied by the difference in reaction times: 20 × 0.28 = 5.6 m. The data show that reaction time increases with age, and that the increase becomes larger for older drivers. Answers that describe the pattern should quote values from the table, and should not claim a direct proportion, because the increases are not equal.

Mark scheme
  1. 1 mark

    (0.96 − 0.68) × 20 = 5.6 (m)

    An answer of 5.6 m with no working scores marking point 1. ALLOW 19.2 − 13.6 = 5.6 m. ALLOW recall of distance = speed × time.

  2. 1 mark

    the (mean) reaction time increases as age increases / older drivers react more slowly

    ALLOW the increase is larger for the older age groups (an increase of 0.03 s between the two youngest groups, but of 0.17 s between the two oldest groups). IGNORE explanations of why. DO NOT ALLOW 'reaction time is directly proportional to age'.

Question 3

2 marks

A crash cushion is fixed to the end of a concrete barrier at a motorway junction. If a car hits the cushion, the cushion crushes by up to 1.6 m as it brings the car to a stop. If the car hit the bare concrete, it would stop within the 0.4 m that the front of the car crushes.

Explain how the crash cushion reduces the risk of serious injury to the people in the car.

Model answer

The cushion crushes, so the car and the people in it slow down over a much longer distance (up to 1.6 m instead of 0.4 m) and over a longer time. Losing the same speed over a longer time means a smaller deceleration. Since force = mass × acceleration, a smaller deceleration means a smaller force on the people, so they are less likely to be seriously injured.

Explanation

Large decelerations are dangerous because they need large forces on the body. A crash cushion makes the car stop over about four times the distance, so the deceleration, and the force on each person, is several times smaller. Answers that say the cushion 'absorbs the force' do not explain anything: the key idea is a longer stopping distance or time, giving a smaller deceleration and a smaller force.

Mark scheme
  1. 1 mark

    the car (and the people in it) stop over a longer distance (up to 1.6 m instead of 0.4 m, about four times as far) / in a longer time

    ALLOW the cushion increases the time taken for the car to stop. ALLOW use of a total of 2.0 m (cushion and car both crushing).

  2. 1 mark

    so the deceleration is smaller, so the force on the people is smaller (force = mass × acceleration)

    ALLOW (energy route) the same kinetic energy is transferred over a longer distance, so the force is smaller (work done = force × distance). DO NOT ALLOW 'the cushion absorbs the force'. DO NOT ALLOW 'it softens the impact' with no idea of a smaller deceleration or force.

Question 4

4 marks

Some new cars have automatic emergency braking (AEB). A sensor on the car detects a hazard ahead, and the system applies the brakes without waiting for the driver.

In a test (illustrative data), a car travelling at 28 m/s approaches a hazard:

• with a typical driver, the brakes are applied 0.75 s after the hazard appears
• with AEB, the brakes are applied 0.25 s after the hazard appears
• the braking distance is 56 m in both cases.

Calculate the stopping distance in each case.

Explain why the braking distance is the same in both cases.

Model answer

With the driver: thinking distance = 28 × 0.75 = 21 m, so stopping distance = 21 + 56 = 77 m
With AEB: distance before braking = 28 × 0.25 = 7.0 m, so stopping distance = 7.0 + 56 = 63 m
The braking distance depends on the speed of the car when the brakes are applied, the braking force (which depends on the brakes, the tyres and the road surface) and the mass of the car. These are the same in both cases. AEB only reduces the time before the brakes are applied, so it reduces the thinking distance but not the braking distance.

Explanation

Stopping distance = thinking distance + braking distance. AEB acts like a driver with a very short reaction time: it cuts the distance travelled before braking from 21 m to 7.0 m, so the car stops 14 m sooner. It cannot change the braking distance, which depends on the speed, the mass and the braking force. Students often confuse the factors that affect the two distances.

Mark scheme
  1. 1 mark

    thinking distance with the driver = 28 × 0.75 = 21 (m); or a correct final answer of 77 m and 63 m with no working

    An answer of 77 m (driver) and 63 m (AEB) with no working scores marking points 1 to 3. ALLOW recall of distance = speed × time.

  2. 1 mark

    distance travelled before braking with AEB = 28 × 0.25 = 7.0 (m); or a correct final answer of 77 m and 63 m with no working

  3. 1 mark

    stopping distances: 21 + 56 = 77 (m) with the driver and 7.0 + 56 = 63 (m) with AEB

    Both values are needed for this mark. ALLOW ECF from wrong thinking distances, if each is added to 56 m.

  4. 1 mark

    the braking distance depends on the speed when the brakes are applied and on the braking force (the brakes, tyres and road surface) and the mass of the car, which are all the same; AEB only shortens the time before the brakes are applied

    ALLOW AEB changes only the thinking distance / the reaction time. DO NOT ALLOW 'AEB brakes harder'.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.