Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Physics (Paper 4) Smart practice A mixed round aimed at your weak spots
Unit 5
Waves in matter
Unit 6
Radioactivity
Unit 7
Energy
Unit 8
Global challenges
Unit 9
Practical skills
Avg
score:
–
Topics
done:
0/33

Dissipation and energy transfer in domestic devices

Practise 15 exam-style questions on Dissipation and energy transfer in domestic devices for OCR GCSE Physics (Paper 4). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Domestic electrical appliances have different power ratings.

Which appliance is most likely to transfer about 2000 J of energy each second when it is switched on?

Choose your answer.

  • A a hair dryer
  • B a laptop
  • C a phone charger
  • D an LED lamp

Model answer

A

Explanation

Power is the rate of energy transfer, so 2000 J each second is a power of 2 kW. Appliances that heat something quickly (hair dryers, kettles, heaters, showers) have the highest power ratings, because large amounts of energy must be transferred to a thermal store every second. Electronic devices such as laptops, chargers and LED lamps transfer energy much more slowly.

Mark scheme
  1. 1 mark

    A / a hair dryer

    The only correct answer is A: 2000 J each second is a power of 2000 W (2 kW), and a hair dryer, which heats a stream of air, typically has a power rating of about 1.5 kW to 2.2 kW. B is not correct because a laptop has a power of about 30 W to 90 W; C is not correct because a phone charger has a power of about 5 W to 20 W; D is not correct because an LED lamp has a power of only about 5 W to 10 W. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

An electric hob ring is used to heat some water in a saucepan.

Suggest two ways in which energy supplied to the hob ring is wasted.

Model answer

Some of the energy heats the air around the hob ring and the sides of the pan, and some heats the cooker top around the ring, so it is dissipated to the kitchen instead of heating the water.

Explanation

The useful energy transfer is to the thermal store of the water. Any energy that heats the air, the cooker, the pan itself, or that is carried away by light or steam is wasted, and it is dissipated into the surroundings. Answers need to say where the wasted energy goes: 'heat is lost' on its own is too vague.

Mark scheme
  1. 2 marks

    1 mark for each different way, max 2: heating the air around the hob ring and the saucepan / heating the cooker or the hob surface around the ring / heating the saucepan itself / light (or infrared) given out by the glowing ring that does not reach the water / energy carried away by steam as some of the water evaporates

    1 mark for each different way, max 2. ALLOW 'the ring stays hot after it is switched off' as heating the hob. ALLOW 'heating the kitchen' or 'transferred to the thermal store of the surroundings' as heating the air. IGNORE 'energy is lost' or 'heat escapes' unless the answer says where the energy goes. DO NOT ALLOW energy is used up or destroyed. IGNORE sound.

Question 3

3 marks

A paper shredder has an electric motor that turns sharp metal cutters. If the shredder is used for a long time without a break, its motor gets hot and a sensor switches it off so that it can cool down.

Explain why the motor gets hot when the shredder is used.

Model answer

There is a current in the coils of the motor, and because the wire has resistance the current heats the coils. There is also friction between the moving parts of the motor, such as the axle in its bearings and the gears, so work done against friction heats them too. When the shredder is used for a long time, energy is transferred to the thermal store of the motor faster than it is dissipated to the surroundings, so the motor's temperature keeps rising.

Explanation

Energy is wasted within a motor in two main ways: the heating effect of the current in the coils and work done against friction between moving parts (some is also transferred by sound). A full answer also explains why the temperature rises, by comparing the rate at which energy reaches the motor's thermal store with the rate at which it is dissipated.

Mark scheme
  1. 1 mark

    there is a current in the coils (of wire) of the motor, which have resistance, so the current heats the coils / energy is transferred to the thermal store of the coils

    ALLOW heating effect of the current in the wires of the motor. ALLOW electrons collide with the ions in the wire. IGNORE 'electrical energy turns into heat' unless the current or the coils are mentioned.

  2. 1 mark

    there is friction between moving parts (the axle and bearings, or the gears) of the motor, so work done against friction transfers energy to the thermal store of the motor

    ALLOW friction between the cutters and the paper heats the cutters and so the motor. IGNORE 'friction' on its own without moving parts or heating.

  3. 1 mark

    energy is transferred to the thermal store of the motor faster than it is dissipated to the surroundings, so the temperature of the motor keeps rising

    ALLOW the motor cannot lose energy to the surroundings quickly enough / the energy builds up in the motor over a long time. AW.

Question 4

4 marks

The compressor in a fridge-freezer is driven by an electric motor that is connected to the 230 V mains supply. When the motor is running, the current in it is 0.60 A. The coils of wire in the motor have a total resistance of 25 Ω.

During one day, the motor runs for a total of 8.0 hours.

Calculate the energy wasted heating the coils of the motor during the day.

Model answer

power wasted in the coils = (current)² × resistance = 0.60² × 25 = 9.0 W
time = 8.0 × 3600 = 28 800 s
energy wasted = power × time = 9.0 W × 28 800 s = 259 200 J (about 260 kJ)

Explanation

The current heats the coils because the wire has resistance, so use power = (current)² × resistance with the resistance of the coils. Using 230 V × 0.60 A gives 138 W, which is the total power supplied to the motor, most of which is used to drive the compressor. Then multiply by the time in seconds (or give the energy as 72 W h): leaving the time in hours or minutes is the most common error.

Mark scheme
  1. 1 mark

    recall: power = (current)² × resistance (P = I² × R); power wasted in the coils = 0.60² × 25; or a correct final answer of 259 200 J / 260 000 J with no working

    An answer of 259 200 J (or 260 000 J, 260 kJ, 2.6 × 10⁵ J, 72 W h or 0.072 kW h) with no working scores 4 marks. ALLOW P = I² × R in any form. ALLOW the p.d. across the resistance of the coils, 0.60 × 25 = 15 V, then power = 15 × 0.60 = 9.0 W. DO NOT ALLOW 230 × 0.60 = 138 W for marking points 1 and 2: this is the total power supplied to the motor, not the power wasted in its coils; ALLOW 1 mark (marking point 3) for 3 974 400 J (138 W × 28 800 s). An answer of 4320 J (time in minutes), or 72 given with the unit J or with no unit (time left in hours), scores 2 marks.

  2. 1 mark

    = 9.0 (W); or a correct final answer of 259 200 J / 260 000 J with no working

    ALLOW 9 W.

  3. 1 mark

    recall: energy transferred = power × time (E = P × t); time = 8.0 × 3600 = 28 800 s; energy wasted = 9.0 × 28 800; or a correct final answer of 259 200 J / 260 000 J with no working

    ALLOW the equation in any form. ALLOW ECF from an incorrect power. ALLOW 9.0 W × 8.0 h = 72 W h (the time in hours with the energy given in W h or kW h).

  4. 1 mark

    259 200 (J) / 260 000 (J)

    ALLOW 260 kJ / 2.6 × 10⁵ J in any typed form, for example 2.6E5. ALLOW 72 W h / 0.072 kW h. ALLOW ECF from an incorrect value of (current)² × resistance shown in the working, multiplied by 28 800 s.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.