Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/25

Solubility rules and insoluble salts

Practise 15 exam-style questions on Solubility rules and insoluble salts for Edexcel GCSE Combined Science (Foundation Chemistry Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A student writes: 'All hydroxides are insoluble in water.'

Use the solubility rules to name one hydroxide that shows the student's statement is wrong.

Model answer

Sodium hydroxide.

Explanation

The rule is that hydroxides are insoluble except those of sodium, potassium and ammonium. So sodium hydroxide, potassium hydroxide and ammonium hydroxide are soluble, and any one of them shows the statement is wrong. Calcium hydroxide (in limewater) dissolves only slightly, and the rules class it as insoluble, so it does not score. Naming two hydroxides when one of them is insoluble cancels the mark.

Mark scheme
  1. 1 mark

    sodium hydroxide / potassium hydroxide / ammonium hydroxide

    Any one of these three. accept NaOH / KOH / NH₄OH. do not accept any other hydroxide, for example magnesium hydroxide or copper hydroxide. do not accept calcium hydroxide: it is only slightly soluble and the solubility rules class it as insoluble. If a correct hydroxide is given together with an incorrect one, do not award the mark.

Question 2

2 marks

Here is a list of six compounds.

potassium carbonate, copper(II) hydroxide, ammonium chloride, zinc nitrate, lead(II) sulfate, sodium hydroxide

Use the solubility rules to identify the two compounds in the list that are insoluble in water.

Model answer

Copper(II) hydroxide and lead(II) sulfate.

Explanation

Hydroxides are insoluble except those of sodium, potassium and ammonium, so copper(II) hydroxide is insoluble but sodium hydroxide dissolves. Sulfates are soluble except those of lead, barium and calcium, so lead(II) sulfate is insoluble. Potassium carbonate and ammonium chloride dissolve because all potassium and ammonium salts are soluble, and zinc nitrate dissolves because all nitrates are soluble.

Mark scheme
  1. 1 mark

    copper(II) hydroxide

    Max 1 if more than two answers are given. The two answers can be given in either order. accept copper hydroxide / Cu(OH)₂.

  2. 1 mark

    lead(II) sulfate

    accept lead sulfate / PbSO₄. do not accept lead sulfide.

Question 3

2 marks

Owen makes magnesium carbonate by mixing magnesium sulfate solution with sodium carbonate solution. He filters off the precipitate, dries it and weighs it.

Owen calculated that he should make 2.50 g of magnesium carbonate, but his solid has a mass of 2.81 g.

Suggest two reasons why the mass of Owen's solid is too high.

Model answer

The magnesium carbonate may not have been completely dry, so the water in it added to the mass.
He may not have washed the solid, so some sodium sulfate from the solution was left on it and added to the mass.

Explanation

A mass that is too high means something extra was weighed with the magnesium carbonate. The usual causes are water (the solid was not fully dried) and the soluble product, sodium sulfate, which crystallises on the solid if it is not washed off. Losing some solid, a common suggestion, would make the mass too low, not too high.

Mark scheme
  1. 1 mark

    the solid was not completely dry / still contained water

    Max 2: any two of the three points. accept not dried for long enough / weighed while still damp.

  2. 1 mark

    the solid was not washed (enough), so (soluble) sodium sulfate was left in / on it

    accept the solid contained some of the other product / soluble impurities / some of the solution.

  3. 1 mark

    he weighed it with the filter paper / did not subtract the mass of the filter paper

    ignore 'human error' or 'he weighed it wrongly' with no further detail. do not accept reasons that would make the mass lower, for example some solid was lost or stuck to the beaker.

Question 4

4 marks

Leila wants to make pure lead(II) chloride, which is insoluble in water.

She adds lead(II) nitrate solution to a solution that contains both sodium chloride and sodium sulfate. She filters off the precipitate, washes it with distilled water and dries it.

Explain why Leila's dry solid is not pure lead(II) chloride.

Use the solubility rules in your answer.

Model answer

Lead(II) chloride forms because the chlorides of lead (and silver) are insoluble. But the solution also contains sulfate, and lead(II) sulfate is insoluble too (the sulfates of lead, barium and calcium are insoluble), so lead(II) sulfate also precipitates.
Both solids are left on the filter paper together, so filtering cannot separate them: the dry solid is a mixture of lead(II) chloride and lead(II) sulfate.
The sodium nitrate that forms is soluble (all sodium salts and nitrates are), so it passes through the filter paper and is washed away. It is not the impurity.

Explanation

Check every product that could form against the solubility rules. Lead is an exception in two rules: its chloride and its sulfate are both insoluble, so with chloride and sulfate both present, two precipitates form and filtering keeps both. A common mistake is to say sodium nitrate makes the solid impure, but it is soluble and is removed by filtering and washing.

Mark scheme
  1. 1 mark

    lead(II) sulfate (also) forms / precipitates

    Max 4: any four of the five points. accept lead sulfate / PbSO₄. 'Another precipitate forms' without naming it does not score this point but can score point 3.

  2. 1 mark

    because lead(II) sulfate is insoluble / lead is one of the metals whose sulfate is insoluble (with barium and calcium)

    accept 'sulfates of lead, barium and calcium are insoluble'. do not accept 'all sulfates are insoluble'.

  3. 1 mark

    both precipitates stay on the filter paper / filtering cannot separate them, so the solid is a mixture of lead(II) chloride and lead(II) sulfate

    accept the solid contains two (insoluble) substances / is a mixture.

  4. 1 mark

    the sodium nitrate formed is soluble, so it passes through the filter paper / is washed away (it is not the impurity)

    accept the other product stays dissolved because all sodium salts / all nitrates are soluble. do not award if sodium nitrate is said to be in the solid.

  5. 1 mark

    washing (with distilled water) does not remove the lead(II) sulfate, because it is insoluble / does not dissolve

    accept the lead(II) sulfate cannot be washed away because it does not dissolve in water.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.