Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/25

Ionic and simple molecular substances

Practise 14 exam-style questions on Ionic and simple molecular substances for Edexcel GCSE Combined Science (Foundation Chemistry Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 14 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
14 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A substance has a low melting point. It does not conduct electricity when it is a solid or when it is a liquid.

What type of substance is it most likely to be?

Choose your answer.

  • A giant covalent
  • B ionic
  • C metallic
  • D simple molecular

Model answer

D - simple molecular.

Explanation

Use both clues. A low melting point rules out ionic, metallic and giant covalent substances, which all have strong forces or bonds throughout a giant structure. Not conducting as a solid or a liquid rules out metals and ionic compounds. Only simple molecular substances fit both properties.

Mark scheme
  1. 1 mark

    D / simple molecular

    The only correct answer is D: simple molecular substances have weak forces between their molecules, so they have low melting points, and their molecules have no charge, so they do not conduct in any state. A is not correct because giant covalent substances have very high melting points (many strong covalent bonds must be broken); B is not correct because ionic compounds have high melting points and conduct when liquid (molten); C is not correct because metals conduct electricity as solids and as liquids. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A bath bomb contains lavender oil and Epsom salts.

Lavender oil is made of simple molecular substances. Epsom salts (magnesium sulfate) is an ionic compound.

When you open a box of bath bombs, you can smell the lavender oil, but you cannot smell the Epsom salts.

Explain this difference in terms of the forces between the particles.

Model answer

Lavender oil is made of molecules with only weak forces between them, so some of the molecules escape into the air at room temperature and reach your nose.
Epsom salts has strong electrostatic forces between its oppositely charged ions, so its ions cannot escape from the solid at room temperature, and there is nothing to smell.

Explanation

To smell a substance, some of its particles must leave it and travel through the air to your nose. In a simple molecular substance only weak intermolecular forces hold the molecules together, so some molecules evaporate even at room temperature. In an ionic compound the strong forces between ions hold every ion in the lattice, which is why ionic compounds have very high boiling points and no smell.

Mark scheme
  1. 1 mark

    lavender oil has weak forces between its molecules (intermolecular forces), so some molecules escape into the air / evaporate at room temperature (and reach your nose)

    An explanation linking the force to what happens to the particles is needed for each mark. accept the molecules separate easily / the oil evaporates because little energy is needed to overcome the forces between its molecules. Do not accept the covalent bonds in the oil are weak / break.

  2. 1 mark

    Epsom salts / magnesium sulfate has strong (electrostatic) forces between its (oppositely charged) ions, so its particles do not escape from the solid / it does not evaporate at room temperature

    accept it has a very high boiling point because of the strong forces between the ions, so no particles get into the air. Do not accept 'strong forces between molecules' or 'strong covalent bonds' for magnesium sulfate.

Question 3

2 marks

Sugar (sucrose) is a simple molecular substance. It dissolves in water.

Hannah says: 'When sugar dissolves, the sugar molecules break up into ions, so sugar solution conducts electricity.'

Explain why Hannah is wrong.

Model answer

When sugar dissolves, the sugar molecules separate from each other and spread out through the water, but the covalent bonds inside each molecule do not break, so no ions are formed.
The sugar molecules have no charge, so there are no charged particles to carry the charge, and sugar solution does not conduct electricity.

Explanation

Dissolving a simple molecular substance overcomes only the weak forces between its molecules; each molecule stays whole. Ions are not made, so the solution has no charged particles that can move. Compare this with an ionic compound such as sodium chloride, whose ions already exist in the solid and become free to move when it dissolves.

Mark scheme
  1. 1 mark

    when sugar dissolves the molecules (only) separate / spread out, but the covalent bonds inside them do not break (the molecules stay whole)

    accept the sugar molecules stay as molecules / do not form ions / only the forces between the molecules are overcome. Do not accept 'the covalent bonds are weak'.

  2. 1 mark

    sugar molecules have no (overall) charge / the solution contains no (sugar) ions, so there are no charged particles to carry the charge and the solution does not conduct

    accept sugar solution is a poor conductor / does not conduct because the molecules are neutral. A statement that the solution does not conduct needs a reason for the mark.

Question 4

4 marks

Marek tested whether solutions of four solids conduct electricity.

He stirred each solid into tap water in a beaker. He then dipped two carbon electrodes, connected to a battery and a bulb, into the beaker. He used the same two electrodes for every test, without rinsing them, in this order:

1 potassium nitrate: bulb lit brightly
2 sodium chloride: bulb lit brightly
3 glucose: bulb lit dimly
4 candle wax (did not dissolve): bulb lit dimly

Glucose and candle wax are simple molecular substances.

Suggest two reasons why the bulb lit dimly in tests 3 and 4. Describe two improvements to Marek's method.

Model answer

Reason 1: tap water is not pure. It contains dissolved ions, which can move and carry the charge, so the bulb lights dimly even when the solid does not form ions.
Reason 2: Marek did not rinse the electrodes, so some potassium nitrate and sodium chloride solution from tests 1 and 2 was carried into the later beakers, adding ions.
Improvement 1: use deionised (distilled) water instead of tap water.
Improvement 2: rinse the electrodes with deionised water between tests.

Explanation

Glucose and wax are simple molecular, so they should not conduct at all: a dim bulb means ions came from somewhere else. Tap water contains dissolved ions, and electrodes that are not rinsed carry ions from one solution to the next. Using deionised water and rinsing the electrodes removes both sources, and testing the water alone shows whether it conducts before anything is added.

Mark scheme
  1. 1 mark

    reason: tap water contains (dissolved) ions (that can move and carry the charge)

    MP1 and MP2 are the reasons; MP3-MP6 are improvements: max 2 for MP3-MP6. accept tap water contains dissolved salts / is not pure water. Do not accept 'glucose forms ions in water'.

  2. 1 mark

    reason: the electrodes were not rinsed, so traces of the (ionic) solutions from tests 1 and 2 were carried into the later beakers

    accept the electrodes were contaminated with potassium nitrate / sodium chloride (solution) / with ions from earlier tests.

  3. 1 mark

    improvement: use deionised / distilled water instead of tap water

    accept pure water. Do not accept 'use clean water' on its own.

  4. 1 mark

    improvement: rinse the electrodes with deionised / distilled water (and dry them) between tests / use clean electrodes for each test

    accept wash the electrodes between each test. Do not accept 'use new batteries' or 'use a brighter bulb'.

  5. 1 mark

    improvement: test the water on its own first (as a control)

    accept put the electrodes in the water before adding the solid, to check that it does not conduct. Max 2 for MP3-MP6.

  6. 1 mark

    improvement: use an ammeter to measure the current instead of judging the brightness of the bulb

    accept add an ammeter (in series) to get a reading for each solution. Max 2 for MP3-MP6.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.