Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/25

Exothermic and endothermic changes

Practise 15 exam-style questions on Exothermic and endothermic changes for Edexcel GCSE Combined Science (Foundation Chemistry Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

In a chemical reaction, 1250 kJ of energy is needed to break the bonds in the reactants. When the bonds in the products are made, 1480 kJ of energy is released.

Which statement describes this reaction?

Choose your answer.

  • A endothermic, because energy is needed to break the bonds
  • B exothermic, because more energy is released making bonds than is needed to break bonds
  • C endothermic, because more energy is released making bonds than is needed to break bonds
  • D exothermic, because breaking the bonds releases 1250 kJ of energy

Model answer

B - exothermic, because more energy is released making bonds than is needed to break bonds.

Explanation

Compare the two amounts of energy: 1480 kJ is released making bonds but only 1250 kJ is needed to break bonds, so more heat energy is given out than is taken in and the reaction is exothermic. If less energy were released making bonds than was needed to break bonds, the reaction would be endothermic. Remember that breaking bonds always takes in energy.

Mark scheme
  1. 1 mark

    B / exothermic, because more energy is released making bonds than is needed to break bonds

    The only correct answer is B: the energy released when the bonds in the products are made (1480 kJ) is more than the energy needed to break the bonds in the reactants (1250 kJ), so overall heat energy is given out and the reaction is exothermic. A is not correct because every reaction needs energy to break bonds - what decides the overall change is whether more or less energy is released making the new bonds; C is not correct because a reaction that releases more energy making bonds than it needs to break bonds is exothermic, not endothermic; D is not correct because breaking bonds takes in energy; it does not release it. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

Heat energy changes take place during neutralisation reactions. When a neutralisation reaction takes place in solution, the heat energy change can be measured as a change in the temperature of the solution.

Name two other types of change that take place in solution and can be investigated in the same way.

Model answer

Dissolving a salt in water, and displacement reactions.

Explanation

Heat energy changes also happen when salts dissolve in water, in displacement reactions and in precipitation reactions. When these changes take place in solution, the temperature of the solution can be measured before and after to show whether heat energy is given out or taken in. Combustion is not correct here because it does not take place in solution.

Mark scheme
  1. 1 mark

    dissolving (a salt in water)

    Max 1 if more than two answers are given and one of them is wrong. Any two from MP1 to MP4; max 2. Allow 'a salt dissolving' or a named salt dissolving in water. Do not accept 'melting', 'boiling' or 'evaporating'.

  2. 1 mark

    displacement (reactions)

    Allow a correct example, e.g. 'zinc added to copper(II) sulfate solution' or 'a metal displacing a less reactive metal from a solution of its salt'.

  3. 1 mark

    precipitation (reactions)

    Allow 'mixing two solutions to make an insoluble solid / a precipitate' or a correct example, e.g. 'silver nitrate solution mixed with sodium chloride solution'.

  4. 1 mark

    a metal reacting with a (dilute) acid

    Allow a named example, e.g. 'magnesium added to dilute hydrochloric acid'. Do not accept an acid reacting with an alkali, a base, a metal oxide or a metal carbonate (these are neutralisation reactions, given in the question), or 'combustion' or 'burning' (these do not take place in solution).

Question 3

2 marks

Sanjay measures the temperature change when potassium nitrate dissolves in water. He reads a thermometer by eye once every minute.

His teacher suggests using a temperature probe connected to a data logger instead.

Give two reasons why the temperature change measured with the probe and data logger is likely to be closer to the true value.

Model answer

The data logger records the temperature continuously, so the lowest temperature is not missed between Sanjay's one-minute readings. It also removes errors in reading the thermometer scale by eye, such as parallax errors.

Explanation

Reading a thermometer once a minute can miss the lowest temperature, which makes the measured temperature change too small. A data logger takes many readings and does not misread the scale. Answers such as "it is easier" do not explain why the value would be more accurate.

Mark scheme
  1. 1 mark

    it records the temperature continuously / very often (e.g. every second), so the lowest temperature is not missed (between readings)

    Any two from MP1, MP2 and MP3; max 2. Ignore 'it is quicker' or 'it is easier' on their own. Ignore 'it is more reliable' with no reason.

  2. 1 mark

    there are no (human) errors in reading the scale / no parallax errors

    Allow 'Sanjay might misread the thermometer'.

  3. 1 mark

    it gives readings with a higher resolution / to more decimal places (e.g. 0.1 °C)

    Allow 'it is more precise'.

Question 4

4 marks

When hydrogen burns in oxygen, water is formed. This reaction is exothermic.

2H−H + O=O → 2H−O−H

Scientists are developing ways of splitting water back into hydrogen and oxygen.

2H−O−H → 2H−H + O=O

Name the bonds that are broken and the bonds that are made when water is split.

Explain whether splitting water is exothermic or endothermic, in terms of the energy involved in breaking and making these bonds.

Model answer

When water is split, the O−H bonds in the water molecules are broken. H−H bonds (in hydrogen) and O=O bonds (in oxygen) are made.

Splitting water is endothermic. Breaking bonds takes in energy and making bonds gives out energy. Burning hydrogen is exothermic because more energy is given out making the O−H bonds than is taken in breaking the H−H and O=O bonds. Splitting water is the reverse, so more energy is taken in breaking the O−H bonds than is given out making the H−H and O=O bonds. Overall, energy is taken in.

Explanation

Splitting water is the reverse of burning hydrogen, so the bonds broken and the bonds made swap over. In burning, making the O−H bonds gives out more energy than breaking the H−H and O=O bonds takes in, so in splitting water, breaking the O−H bonds takes in more energy than making H−H and O=O gives out: the reaction is endothermic. Saying 'endothermic because bonds are broken' is not enough, because every reaction breaks bonds: it is the comparison of the two amounts of energy that decides.

Mark scheme
  1. 1 mark

    bonds broken: O−H (bonds in the water molecules)

    The bonds must be clearly identified as broken or made. Allow 'the bonds between the oxygen and hydrogen atoms (in water)' / 'the bonds in water'. Do not accept H−H or O=O as the bonds broken.

  2. 1 mark

    bonds made: H−H and O=O (bonds in the hydrogen and oxygen molecules)

    Both are needed. Allow 'the bonds in hydrogen molecules and in oxygen molecules'. Allow the oxygen-oxygen bond written as O−O or described as 'the double bond in oxygen'. Do not accept 'O−H bonds are made'.

  3. 1 mark

    (splitting water is) endothermic

    Allow 'heat energy is taken in (overall)'. Do not accept 'exothermic'.

  4. 1 mark

    (because) more energy is taken in breaking the O−H bonds than is given out making the H−H and O=O bonds

    MP4 can be awarded only if MP3 is awarded. Allow 'less energy is released forming the bonds in the products than is needed to break the bonds in the reactants'. Allow the argument from the reverse reaction: burning hydrogen gives out more energy making O−H bonds than it takes in breaking H−H and O=O bonds, so splitting water takes in more energy breaking O−H bonds than it gives out making H−H and O=O bonds. Do not accept 'because bonds are broken' or 'because breaking bonds takes in energy' on its own (every reaction breaks bonds: the two amounts of energy must be compared), 'more bonds are broken than made' or 'making bonds takes in energy'.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.