Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Edexcel GCSE Chemistry (Paper 2) Smart practice A mixed round aimed at your weak spots
Unit 1
Key concepts in chemistry
Unit 6
Groups in the periodic table
Unit 7
Rates of reaction and energy changes
Unit 8
Fuels and Earth science
Unit 9
Separate chemistry 2
Avg
score:
–
Topics
done:
0/34

Catalysts and enzymes

Practise 13 exam-style questions on Catalysts and enzymes for Edexcel GCSE Chemistry (Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 13 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
13 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Adding a catalyst makes a reaction go faster at the same temperature.

Which statement explains how?

Choose your answer.

  • A it gives the particles more energy
  • B particles collide more often
  • C it raises the activation energy
  • D it lowers the activation energy

Model answer

D - it lowers the activation energy.

Explanation

A catalyst gives the reaction a different route with a lower activation energy, so more of the collisions are successful. The examiners' reports note that many students think a catalyst gives the particles more energy or makes them collide more often; neither is true.

Mark scheme
  1. 1 mark

    D / it lowers the activation energy (1)

    The only correct answer is D: a catalyst provides an alternative pathway (route) with a lower activation energy, so a greater proportion of collisions have enough energy to react. A is not correct because a catalyst does not give the particles extra energy - heating does that; B is not correct because a catalyst does not change how often the reactant particles collide; C is not correct because a higher activation energy would make the reaction slower. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A student tested whether copper(II) oxide is a catalyst for the decomposition of hydrogen peroxide. She added 0.50 g of copper(II) oxide powder to hydrogen peroxide solution, and oxygen was given off faster than without it. At the end she filtered off the solid, dried it and weighed it. Its mass was 0.47 g.

The student concluded that copper(II) oxide is not a catalyst because its mass had decreased.

Suggest why the mass was lower, and describe how the student could show that the copper(II) oxide is unchanged chemically.

Model answer

Some of the powder was probably lost during the experiment - for example, a little stayed on the filter paper or in the flask - so not all of it was weighed. To show it is unchanged chemically, the student could add the recovered copper(II) oxide to a fresh sample of hydrogen peroxide solution: if it still makes oxygen come off just as quickly, it has not been changed or used up.

Explanation

A small loss of mass (0.03 g out of 0.50 g) is more likely to come from losing powder in filtering and transferring than from the catalyst being used up. Re-using the recovered solid is a good test: a catalyst works again and again because it is chemically unchanged. Not drying the solid fully would give a higher mass, not a lower one.

Mark scheme
  1. 1 mark

    some of the powder was lost (when it was filtered / transferred) / some stayed on the filter paper / in the flask (1)

    accept 'some powder was spilt'. Do not accept 'the solid was not dry enough' (that would make the mass higher) or 'some of it reacted'.

  2. 1 mark

    add the recovered solid to fresh hydrogen peroxide solution: it still speeds up the decomposition (as much as before) (1)

    accept 'reuse it with more hydrogen peroxide and show that oxygen is still given off quickly'. accept 'it is still a black powder' only if linked to testing it again. Ignore 'repeat the experiment' on its own.

Question 3

3 marks

A teacher heats a solution of Rochelle salt (potassium sodium tartrate) and hydrogen peroxide to about 75 °C. Bubbles of gas form slowly.

The teacher then adds a small amount of pink cobalt(II) chloride solution. The mixture turns green and froths vigorously. After about 30 seconds the frothing dies down and the pink colour returns.

Explain how these observations show that the cobalt(II) chloride acts as a catalyst for the reaction.

Model answer

After the cobalt(II) chloride is added, gas is given off much faster than before, so it increases the rate of reaction. The mixture turns green, which shows that the cobalt changes into a different substance while the reaction is happening, so it takes part in the reaction. But when the reaction is over the pink colour returns, so the cobalt(II) chloride has been changed back - it is chemically unchanged at the end and has not been used up. Speeding up a reaction and being unchanged at the end are what a catalyst does.

Explanation

The specification says a catalyst is unchanged chemically at the end of the reaction - not that it never changes during it. In this demonstration you can see the catalyst change colour while it works and then return to its original colour, showing it is regenerated. The faster frothing shows the increase in rate.

Mark scheme
  1. 1 mark

    the cobalt(II) chloride makes the reaction (much) faster - gas is given off much more quickly than without it (1)

    accept 'it increases the rate of reaction'.

  2. 1 mark

    the pink colour returns at the end, so the cobalt(II) chloride is chemically unchanged at the end of the reaction (1)

    accept 'the cobalt chloride is re-formed / not used up'. The colour must be linked to being unchanged.

  3. 1 mark

    the green colour shows that the cobalt changes into a different substance during the reaction / takes part in the reaction, but it is changed back at the end (1)

    accept 'the catalyst takes part in the reaction but is regenerated'. Do not accept 'the green colour is the product' unless the return to pink is explained.

Question 4

4 marks

Increasing the temperature and adding a catalyst both increase the rate of a reaction.

Compare how these two changes increase the rate of reaction. Refer to the energy of the particles, their collisions and the activation energy.

Model answer

Increasing the temperature gives the particles more kinetic energy, so they move faster and collide more frequently. The activation energy stays the same, but more of the particles now have energy equal to or greater than it. Adding a catalyst does not change the energy of the particles or how often they collide; instead it provides an alternative pathway with a lower activation energy, so more of the particles have enough energy to react. In both cases a greater proportion of the collisions are successful, so there are more successful collisions per second and the rate increases.

Explanation

Both changes increase the number of collisions per second with enough energy to react, but by opposite routes: heating raises the energy of the particles, while a catalyst lowers the energy needed. Only heating also makes collisions more frequent. A strong comparison makes a point about each change and says what they have in common.

Mark scheme
  1. 1 mark

    (temperature:) the particles have more (kinetic) energy / move faster (1)

    Any four from the seven points; max 4. A comparison needs points about both changes: max 3 if only one change is described.

  2. 1 mark

    (temperature:) so the particles collide more frequently / there are more collisions per second (1)

    allow 'collisions happen more often'. Do not accept 'more collisions' without reference to frequency or time.

  3. 1 mark

    (temperature:) a greater proportion of the particles / collisions have energy equal to or greater than the activation energy (which does not change) (1)

    accept 'more particles have enough energy to react when they collide'.

  4. 1 mark

    (catalyst:) provides an alternative pathway with a lower activation energy (1)

    accept 'lowers the activation energy'. Reject 'the catalyst gives the particles more energy'.

  5. 1 mark

    (catalyst:) the energy of the particles / the frequency of collisions does not change (1)

    accept 'the particles move at the same speed as before'.

  6. 1 mark

    (catalyst:) a greater proportion of the particles / collisions have energy equal to or greater than the (lower) activation energy (1)

    accept 'more particles now have enough energy to react'. A single statement that applies to both changes scores either this point or point 3, not both.

  7. 1 mark

    (both:) a greater proportion of collisions are successful / there are more successful collisions per second (1)

    Do not accept 'more collisions' without 'successful' or 'per second'.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.