Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/28

The atomic model

Practise 14 exam-style questions on The atomic model for OCR GCSE Combined Science (Physics Paper 11). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 14 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
14 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A science magazine compares four tiny things: an atom, a bacterium, a nucleus and a small molecule.

Which list puts them in order of size, from the smallest to the largest?

Choose your answer.

  • A atom, nucleus, small molecule, bacterium
  • B nucleus, atom, small molecule, bacterium
  • C nucleus, small molecule, atom, bacterium
  • D small molecule, nucleus, atom, bacterium

Model answer

B

Explanation

Work from the inside out: the nucleus is a tiny part of an atom, a small molecule is a few atoms joined together, and a bacterium is a whole cell built from a vast number of molecules. Atoms and small molecules are typically about 1 × 10⁻¹⁰ m across, while a nucleus is about 100 000 times smaller than its atom. A common error is to think a molecule is smaller than an atom.

Mark scheme
  1. 1 mark

    B / nucleus, atom, small molecule, bacterium

    The only correct answer is B: a nucleus is about 10⁻¹⁴ m to 10⁻¹⁵ m across, far smaller than the atom it is in (typically 1 × 10⁻¹⁰ m); a small molecule is a few atoms joined together, so it is a little larger than one atom; a bacterium (about 10⁻⁶ m) is a cell made of a huge number of molecules. A is not correct because the nucleus is inside the atom and much smaller than it; C is not correct because a molecule is made of atoms, so it cannot be smaller than one atom; D is not correct because a molecule contains atoms, and each atom contains a nucleus. ALLOW the letter or the list. If more than one option is given, do not award the mark.

Question 2

2 marks

In Rutherford's nuclear model, electrons move around the nucleus at any distance from it.

Scientists at the time predicted that an electron moving around a nucleus would gradually lose energy and spiral inwards until it reached the nucleus. If this happened, atoms would collapse. Atoms do not collapse.

In 1913, Bohr suggested a new model of the atom.

Explain how Bohr's model solved this problem.

Model answer

Bohr said that electrons can only be in fixed orbits (shells) at set distances from the nucleus. An electron in one of these orbits is stable and does not lose energy, and it cannot be in between the orbits, so it cannot gradually spiral into the nucleus. This is why atoms do not collapse.

Explanation

Bohr kept Rutherford's tiny positive nucleus but changed where the electrons could be: only in stable shells at fixed distances. A gradual spiral would need the electron to pass through every distance, which Bohr's model does not allow. Saying only 'Bohr added shells' gains the first mark; the second needs the link to stability.

Mark scheme
  1. 1 mark

    (in Bohr's model) electrons can only be in fixed orbits / shells / energy levels at set distances from the nucleus

    ALLOW electrons orbit at particular / certain / specific distances. DO NOT ALLOW electrons orbit at any distance. IGNORE references to protons and neutrons.

  2. 1 mark

    an electron in one of these (fixed) orbits / shells is stable / does not lose energy (while it stays there), so it cannot gradually spiral into the nucleus

    ALLOW an electron cannot be between the fixed orbits, so it cannot gradually move closer to the nucleus. ALLOW the shells are stable (so the atom does not collapse). The idea of stability or of not spiralling in is needed for this mark.

Question 3

3 marks

Geiger and Marsden found that about 1 in every 8000 alpha particles fired at a thin metal foil was turned back towards the source.

A student suggests that these alpha particles were turned back because they hit electrons in the metal atoms.

• An alpha particle is positively charged.
• The mass of an alpha particle is about 7300 times the mass of an electron.

Explain why the student's suggestion is wrong, and what must have turned the alpha particles back.

Model answer

An electron has a tiny mass compared with an alpha particle, which is about 7300 times heavier, so an electron would be knocked aside and could not turn an alpha particle back. Electrons are also negative, so they attract the positive alpha particle rather than repel it. The alpha particles must have been repelled by a concentrated positive charge, the nucleus, which contains almost all the mass of the atom and is much heavier than an alpha particle.

Explanation

Think about a collision between a light object and a heavy one: the light one is pushed aside, so a light electron cannot reverse a heavy alpha particle. Bouncing back needs a strong repulsion from something positive and much more massive, which is the nucleus. Many answers say only 'it hit the nucleus' without explaining why the nucleus, and not an electron, could turn it back.

Mark scheme
  1. 1 mark

    an electron has a (very) small mass compared with an alpha particle, so it would be knocked aside / could not turn the alpha particle back / could only deflect it very slightly

    Max 3 in total from the four marking points. Max 2 if neither marking point 3 nor marking point 4 is given (the answer must say what turned the alpha particles back). ALLOW use of the data: the alpha particle is about 7300 times heavier, so the electron would bounce off the alpha particle (and not the other way round).

  2. 1 mark

    electrons are negatively charged, so they attract the (positive) alpha particle / they cannot repel it back

    ALLOW opposite charges attract, so an electron would pull the alpha particle towards it, not push it away.

  3. 1 mark

    the alpha particles were repelled by a (concentrated) positive charge / by the positive nucleus

    ALLOW like charges repel, so the alpha particles were pushed back by the nucleus. DO NOT ALLOW the alpha particles hit protons or neutrons (unless repulsion by the positive nucleus is also given).

  4. 1 mark

    (which has) a much greater mass than an alpha particle / (which contains) almost all the mass of the atom

    ALLOW the nucleus is very heavy / massive compared with the alpha particle. IGNORE the nucleus is small (on its own).

Question 4

5 marks

A carbon atom has a mass of 2.0 × 10⁻²⁶ kg. Almost all of this mass is in its nucleus.

In a simple model, the atom is a cube with sides 2.0 × 10⁻¹⁰ m long, and its nucleus is a cube with sides 5.0 × 10⁻¹⁵ m long.

Calculate how many times greater the density of the nucleus is than the density of the whole atom.

Model answer

Volume of atom = (2.0 × 10⁻¹⁰)³ = 8.0 × 10⁻³⁰ m³
Density of atom = mass ÷ volume = 2.0 × 10⁻²⁶ ÷ 8.0 × 10⁻³⁰ = 2500 kg/m³
Volume of nucleus = (5.0 × 10⁻¹⁵)³ = 1.25 × 10⁻⁴³ m³
Density of nucleus = 2.0 × 10⁻²⁶ ÷ 1.25 × 10⁻⁴³ = 1.6 × 10¹⁷ kg/m³
Number of times greater = 1.6 × 10¹⁷ ÷ 2500 = 6.4 × 10¹³

Explanation

Because almost all the mass is in the nucleus, the atom and the nucleus have the same mass, so the density ratio depends only on the volumes. The nucleus is 4 × 10⁴ times narrower, so its volume is (4 × 10⁴)³ = 6.4 × 10¹³ times smaller and it is that much denser. The most common errors are forgetting to cube the lengths and dividing the densities the wrong way round.

Mark scheme
  1. 1 mark

    volume of atom = (2.0 × 10⁻¹⁰)³ = 8.0 × 10⁻³⁰ (m³); or a correct final answer of 6.4 × 10¹³ (or 6 × 10¹³) with no working

    An answer of 6.4 × 10¹³ (or 6 × 10¹³) with no working scores 5 marks. ALLOW the length-ratio method: (2.0 × 10⁻¹⁰ ÷ 5.0 × 10⁻¹⁵)³ = (4.0 × 10⁴)³ scores marking points 1 to 4 when the mass of the nucleus is taken as equal to the mass of the atom. ALLOW 4 marks for 1.6 × 10⁻¹⁴ (ratio inverted: density of atom ÷ density of nucleus). An answer of 4.0 × 10⁴ (the lengths compared but not cubed) scores 1 mark.

  2. 1 mark

    density of atom = 2.0 × 10⁻²⁶ ÷ 8.0 × 10⁻³⁰ = 2500 (kg/m³); or a correct final answer of 6.4 × 10¹³ (or 6 × 10¹³) with no working

    This mark shows the recalled equation density = mass ÷ volume used correctly. ALLOW ECF from a wrong volume of the atom. ALLOW the volume-ratio method for marking points 2 and 4: because the mass is the same, density of nucleus ÷ density of atom = volume of atom ÷ volume of nucleus, stated or used.

  3. 1 mark

    volume of nucleus = (5.0 × 10⁻¹⁵)³ = 1.25 × 10⁻⁴³ (m³); or a correct final answer of 6.4 × 10¹³ (or 6 × 10¹³) with no working

    ALLOW 1.3 × 10⁻⁴³ (m³).

  4. 1 mark

    density of nucleus = 2.0 × 10⁻²⁶ ÷ 1.25 × 10⁻⁴³ = 1.6 × 10¹⁷ (kg/m³); or a correct final answer of 6.4 × 10¹³ (or 6 × 10¹³) with no working

    ALLOW 8.0 × 10⁻³⁰ ÷ 1.25 × 10⁻⁴³ seen (volume-ratio method). ALLOW ECF from a wrong volume of the nucleus.

  5. 1 mark

    6.4 × 10¹³ / 6 × 10¹³

    ALLOW typed forms such as 6.4 × 10 to the power 13, 6.4 × 10 13 or 6.4E13. ALLOW ECF from earlier errors in the working. IGNORE units.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.