Question 1
1 markA student hangs a load from a copper wire. She measures the length of the wire before the load is added, while the load is on and after the load is removed.
Length before the load is added = 1.500 m
Length with the load on = 1.506 m
Length after the load is removed = 1.504 m
Which answer describes the deformation of the wire and its permanent extension?
Choose your answer.
- A elastic, 0 mm
- B plastic, 2 mm
- C plastic, 4 mm
- D plastic, 6 mm
Model answer
C: permanent extension = 1.504 − 1.500 = 0.004 m = 4 mm, so the deformation is plastic.
Explanation
The permanent extension is found by comparing the length after the load is removed with the original length. Any permanent extension means that the wire has been deformed plastically. A common error is to use the extension while the load is on (6 mm), or to think the deformation was elastic because the wire got a little shorter when the load was removed.
Mark scheme
-
1 mark
C / plastic, 4 mm
The only correct answer is C: the wire does not return to its original length of 1.500 m when the load is removed, so it has been deformed plastically, and its permanent extension is 1.504 m − 1.500 m = 0.004 m = 4 mm. A is not correct because the wire is still 4 mm longer than at the start, so the deformation was not only elastic, even though the wire got shorter when the load was removed; B is not correct because 2 mm (1.506 m − 1.504 m) is the part of the extension that disappeared when the load was removed; D is not correct because 6 mm (1.506 m − 1.500 m) is the extension while the load was on, not the permanent extension. ALLOW the letter or the option. If more than one option is given, do not award the mark.