Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/28

Density

Practise 17 exam-style questions on Density for OCR GCSE Combined Science (Physics Paper 11). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 17 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
17 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Block P and block Q are solid cubes made of the same type of glass.

Each side of block Q is twice as long as each side of block P.

Which statement compares block Q with block P?

Choose your answer.

  • A mass 2 times as large, density the same
  • B mass 4 times as large, density the same
  • C mass 8 times as large, density the same
  • D mass 8 times as large, density 8 times as large

Model answer

C

Explanation

Doubling every side of a cube multiplies its volume by 2³ = 8. The material is the same, so mass ÷ volume is the same and the mass must also be 8 times larger. Common errors are to scale by 2 or 4, or to think a bigger block has a bigger density.

Mark scheme
  1. 1 mark

    C / mass 8 times as large, density the same

    The only correct answer is C: the volume of block Q is 2 × 2 × 2 = 8 times the volume of block P, and the same glass has the same density, so the mass is 8 times as large. A is not correct because it doubles only one length; B is not correct because it uses the area of one face (2 × 2), not the volume; D is not correct because density depends on the material, not the size, so it does not change. ALLOW the letter or the statement. If more than one option is given, do not award the mark.

Question 2

2 marks

Solid iodine has a density of 4930 kg/m³. Iodine gas at 200 °C has a density of about 6.5 kg/m³.

A student says:

'Iodine gas has a much lower density than solid iodine because the particles in the gas are much lighter than the particles in the solid.'

Explain why the student is wrong.

Model answer

The particles are iodine molecules in both the solid and the gas, so each particle has the same mass in both states. The gas has a much lower density because its particles are far apart, with large spaces between them, so each cubic metre contains far fewer particles and therefore much less mass than the closely packed solid.

Explanation

Changing state does not change the particles, only their arrangement and movement. Density depends on how many particles are packed into each unit of volume, so the spread-out particles of a gas give a very low density. A common error is to say gas particles are lighter or smaller.

Mark scheme
  1. 1 mark

    the particles / iodine molecules are the same in the solid and the gas / each particle has the same mass in both states

    ALLOW a change of state does not change the mass of the particles. IGNORE the particles do not change size (on its own).

  2. 1 mark

    the gas has a lower density because its particles are much further apart, so there are far fewer particles (and so less mass) in each m³

    ALLOW the same mass of gas takes up a much larger volume, because the particles are spread out / have large spaces between them. ORA (allow the reverse argument): the particles in the solid are closely packed, so there are many more in each m³. DO NOT ALLOW the particles in the gas get bigger.

Question 3

3 marks

Solid carbon dioxide (dry ice) sublimes at room temperature: it changes straight from a solid into carbon dioxide gas.

A technician leaves a 2.7 kg block of dry ice in a small storeroom. The volume of the storeroom is 9.0 m³.

The density of carbon dioxide gas at room temperature is 1.8 kg/m³.

Calculate the volume of carbon dioxide gas formed when all of the dry ice has sublimed, as a percentage of the volume of the storeroom.

Use the equation: density = mass ÷ volume

Model answer

Mass is conserved, so 2.7 kg of carbon dioxide gas forms.
Volume of gas = mass ÷ density = 2.7 ÷ 1.8 = 1.5 m³
Percentage of the storeroom = 1.5 ÷ 9.0 × 100 = 17 %

Explanation

When the dry ice sublimes no particles are created or destroyed, so the gas has the same mass as the solid; rearranging density = mass ÷ volume gives the volume of the gas. A solid block that fits in a box becomes 1.5 m³ of gas, about a sixth of the room, which is why dry ice must only be stored in a well-ventilated place. A common error is to multiply the mass by the density.

Mark scheme
  1. 1 mark

    (volume of gas =) mass ÷ density = 2.7 ÷ 1.8; or a correct final answer of 17 % (or 16.7 %) with no working

    An answer of 17 % (or 16.7 %) with no working scores 3 marks. The mass of gas formed is 2.7 kg because mass is conserved when the dry ice sublimes. An answer of 54 % (from 2.7 × 1.8 = 4.86 m³) scores 1 mark (ECF for the percentage step).

  2. 1 mark

    1.5 (m³); or a correct final answer of 17 % (or 16.7 %) with no working

    IGNORE units.

  3. 1 mark

    (1.5 ÷ 9.0 × 100 =) 17 / 16.7 (%)

    ALLOW 16.67 %. ALLOW ECF from a wrong volume of gas.

Question 4

4 marks

At 100 °C:

• liquid water has a density of 960 kg/m³, and 1 cm³ of it contains about 3.2 × 10²² water molecules
• 1 cm³ of steam contains about 2.0 × 10¹⁹ water molecules.

Calculate the density of steam at 100 °C, in kg/m³.

Use ideas about the water molecules to explain your method.

Model answer

Each water molecule has the same mass in the liquid and in the steam, so the density depends only on how many molecules there are in each cm³.
Ratio of molecules = 2.0 × 10¹⁹ ÷ 3.2 × 10²² = 6.25 × 10⁻⁴
Density of steam = 960 × 6.25 × 10⁻⁴ = 0.60 kg/m³
The steam is about 1600 times less dense because its molecules are much further apart.

Explanation

The key idea is that a change of state does not change the molecules, so the mass of each cm³ is set by the number of molecules in it. Either scale the density of the liquid by the ratio of the numbers, or find the mass of one molecule and multiply by the number in 1 cm³ of steam. Watch out for dividing the ratio the wrong way round and for leaving the answer in g/cm³.

Mark scheme
  1. 1 mark

    ratio of molecules: 2.0 × 10¹⁹ ÷ 3.2 × 10²² = 6.25 × 10⁻⁴ / mass of one molecule = 0.96 g ÷ 3.2 × 10²² = 3.0 × 10⁻²³ g; or a correct final answer of 0.60 kg/m³ with no working

    An answer of 0.60 kg/m³ with no working scores marking points 1 to 3. ALLOW 3.2 × 10²² ÷ 2.0 × 10¹⁹ = 1600 if it is then used to divide 960. ALLOW the mass of one molecule in kg: 960 kg/m³ = 0.96 g/cm³, so 9.6 × 10⁻⁴ kg ÷ 3.2 × 10²² = 3.0 × 10⁻²⁶ kg. An answer of 1.5 × 10⁶ kg/m³ (960 × 1600, the ratio used the wrong way round) scores marking point 1 only.

  2. 1 mark

    density of steam = 960 × 6.25 × 10⁻⁴ / 960 ÷ 1600 / mass of 1 cm³ of steam = 2.0 × 10¹⁹ × 3.0 × 10⁻²³ g = 6.0 × 10⁻⁴ g; or a correct final answer of 0.60 kg/m³ with no working

    ALLOW ECF from a wrong ratio or a wrong mass of one molecule. An answer of 6.0 × 10⁻⁴ g/cm³ that is not converted to kg/m³ scores marking points 1 and 2 only.

  3. 1 mark

    0.60 (kg/m³)

    ALLOW 0.6 / 6.0 × 10⁻¹ (kg/m³). ALLOW 6.0 × 10⁻⁴ g/cm³ correctly converted to 0.60 kg/m³.

  4. 1 mark

    each water molecule has the same mass in the liquid and in the steam, so the density depends only on the number of molecules in each cubic centimetre (the molecules in steam are much further apart, so there are far fewer in each cubic centimetre)

    This mark can be given even if the calculation is wrong. ALLOW the mass of a given volume is proportional to the number of molecules it contains. ALLOW the molecules are the same, so the ratio of the densities equals the ratio of the numbers of molecules. IGNORE the steam molecules are bigger / lighter (contradiction: if stated as the reason, do not award this mark).

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.