Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Physics (Paper 3) Smart practice A mixed round aimed at your weak spots
Unit 1
Matter
Unit 2
Forces
Unit 3
Electricity
Unit 4
Magnetism and magnetic fields
Unit 9
Practical skills
Avg
score:
–
Topics
done:
0/36

Pressure in liquids, floating and sinking

Practise 15 exam-style questions on Pressure in liquids, floating and sinking for OCR GCSE Physics (Paper 3). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

On the Earth, the pressure due to the water at the bottom of a tank is 15 kPa.

An identical tank at a base on the Moon is filled with water to the same depth.

Use the equation: pressure due to a column of liquid = height of column × density of liquid × gravitational field strength

Gravitational field strength on the Earth = 10 N/kg
Gravitational field strength on the Moon = 1.6 N/kg

Calculate the pressure due to the water at the bottom of the tank on the Moon. Give your answer in kPa.

Model answer

The depth and the density are the same, so the pressure is proportional to g.
pressure on the Moon = 15 × 1.6 ÷ 10 = 2.4 kPa

Explanation

For the same liquid at the same depth, the pressure due to the liquid is directly proportional to the gravitational field strength. The Moon's field strength is 1.6 ÷ 10 = 0.16 times the Earth's, so the pressure is 0.16 × 15 kPa = 2.4 kPa. A common mistake is to multiply by 10 ÷ 1.6, which wrongly gives a greater pressure on the Moon.

Mark scheme
  1. 1 mark

    2.4 (kPa)

    ALLOW 2400 Pa (the unit must be given if the answer is in Pa). ALLOW working through the depth: 15 000 ÷ (1000 × 10) = 1.5 m, then 1.5 × 1000 × 1.6 = 2400 Pa. DO NOT ALLOW 94 kPa (15 × 10 ÷ 1.6, the ratio used the wrong way round).

Question 2

2 marks

A U-shaped glass tube is open at both ends and contains some water. A student slowly pours some cooking oil into the left-hand arm of the tube. The oil is less dense than water and does not mix with it.

When the liquids are still, all of the oil is in the left-hand arm, floating on the water. The top surface of the oil is higher than the top surface of the water in the right-hand arm.

Explain why the top surface of the oil is higher than the top surface of the water.

Model answer

Below the oil, the two arms are joined by still water, so at the level of the bottom of the oil the pressure must be the same in both arms; if it were not, water would flow from one arm to the other. In the left-hand arm this pressure is due to the column of oil above that level, and in the right-hand arm it is due to the column of water above the same level (atmospheric pressure acts on both surfaces). Pressure = height × density × g, and the oil is less dense than the water, so the column of oil must be taller than the column of water to give the same pressure. So the top of the oil is higher than the top of the water.

Explanation

In a still liquid, the pressure is the same at all points at the same level that are joined through that liquid. Because pressure depends on height and on density, a less dense liquid needs a taller column to give the same pressure. Saying only that oil floats because it is less dense does not explain why its surface ends up higher than the water surface.

Mark scheme
  1. 1 mark

    at the level of the bottom of the oil (where the oil meets the water), the pressure must be the same in both arms, because the water below that level is still and joins the two arms (otherwise water would flow from one arm to the other)

    ALLOW the pressure at the same level in the still water is the same in both arms. ALLOW the column of oil and the column of water above that level in the right-hand arm must push down with the same force on each square metre. IGNORE atmospheric pressure (it acts on both surfaces). An answer that only says 'the oil floats' scores 0 for this mark.

  2. 1 mark

    pressure (due to a column of liquid) = height × density × g, and the oil is less dense than water, so a taller column of oil is needed to give the same pressure as the column of water above that level in the right-hand arm

    The idea that the column of oil must be taller (or the column of water shorter) to give the same pressure is needed. ALLOW ORA (allow the reverse argument). DO NOT ALLOW 'the oil is lighter' or 'the oil is less dense, so it floats' on its own.

Question 3

3 marks

In a hospital, a patient is given a salt solution through a drip. The solution flows from a bag, down a thin tube and through a needle into a vein in the patient's arm. The bag hangs above the needle.

The solution flows at the correct rate when the pressure of the solution at the needle is 8.0 kPa greater than the pressure at the surface of the solution in the bag.

Use the equation: pressure due to a column of liquid = height of column × density of liquid × gravitational field strength

Density of the salt solution = 1010 kg/m³
Gravitational field strength = 10 N/kg

Calculate the height of the surface of the solution in the bag above the needle.

Give your answer to 2 significant figures.

Model answer

8.0 kPa = 8000 Pa
height = pressure ÷ (density × g)
= 8000 ÷ (1010 × 10)
= 0.792 m
= 0.79 m (to 2 significant figures)

Explanation

The extra pressure at the needle is caused by the column of solution between the surface in the bag and the needle, so rearrange the equation to height = pressure ÷ (density × g). Convert 8.0 kPa to 8000 Pa first: leaving it in kPa gives a height a thousand times too small. Hanging the bag higher increases the pressure at the needle, so the solution flows faster.

Mark scheme
  1. 1 mark

    rearrangement and substitution: height = 8000 ÷ (1010 × 10); or a correct final answer of 0.79 m with no working

    An answer of 0.79 m with no working scores 3 marks. An answer of 0.792 m (or more figures) with no working scores 2 marks (marking points 1 and 2). ALLOW 79 cm. ALLOW use of 9.8 N/kg: 8000 ÷ (1010 × 9.8) = 0.808 m, which gives 0.81 m (3 marks). An answer of 7.9 × 10⁻⁴ m (8.0 used without converting kPa to Pa) scores 1 mark (the significant-figure mark by ECF).

  2. 1 mark

    0.792 (m); or a correct final answer of 0.79 m with no working

    ALLOW 0.7921 (m) or more figures. ALLOW 0.808 (m) if 9.8 N/kg is used.

  3. 1 mark

    0.79 (m) (to 2 significant figures)

    ALLOW ECF for the significant-figure mark from a valid calculation. ALLOW 0.81 (m) if 9.8 N/kg is used. ALLOW 79 cm.

Question 4

4 marks

A large, flat sheet of floating ice (an ice floe) has vertical sides and a uniform thickness of 2.0 m. It floats at rest in the sea.

Use the equation: pressure due to a column of liquid = height of column × density of liquid × gravitational field strength

Density of ice = 920 kg/m³
Density of seawater = 1030 kg/m³
Gravitational field strength = 10 N/kg

Calculate the height of the top surface of the ice floe above the surface of the sea.

Model answer

The floe floats at rest, so the upward force from the water pressure on its base equals the weight of the ice.
For each 1 m² of the floe: weight of ice = 2.0 × 920 × 10 = 18 400 N, so the pressure on the base must be 18 400 Pa.
Depth of the base below the surface = 18 400 ÷ (1030 × 10) = 1.79 m
Height above the surface = 2.0 − 1.79 = 0.21 m

Explanation

A floating object is in equilibrium: the upward force from the water pressure on its base equals its weight. For a floe with vertical sides, the pressure due to the seawater at the base must equal the weight of a 2.0 m column of ice on each square metre, so 1030 × h × g = 920 × 2.0 × g, and g cancels. Many students stop at 1.79 m, which is the depth of the base below the surface, not the height of the top above it.

Mark scheme
  1. 1 mark

    the upward force from the water on the base equals the weight of the ice, so the pressure on the base = weight of ice above each 1 m² = 2.0 × 920 × 10 = 18 400 (Pa); or a correct final answer of 0.21 m (or 0.214 m) with no working

    An answer of 0.21 m (or 0.214 m) with no working scores 4 marks. ALLOW the density-ratio method: fraction of the thickness below the surface = 920 ÷ 1030 = 0.893 for marking point 1, and depth below the surface = 2.0 × 0.893 for marking point 2. ALLOW any other valid method, for example height above the surface = 2.0 × (1030 − 920) ÷ 1030. An answer of 1.79 m (the depth of the base below the surface) scores 3 marks. An answer of 0.16 m (density of fresh water, 1000 kg/m³, used) scores 2 marks (marking points 1 and 4).

  2. 1 mark

    depth of the base below the surface = 18 400 ÷ (1030 × 10); or a correct final answer of 0.21 m (or 0.214 m) with no working

    ALLOW 2.0 × 920 ÷ 1030.

  3. 1 mark

    = 1.79 (m); or a correct final answer of 0.21 m (or 0.214 m) with no working

    ALLOW 1.786 (m) or more figures.

  4. 1 mark

    height above the surface = 2.0 − 1.79 = 0.21 (m)

    ALLOW 0.214 (m). ALLOW ECF from a wrong depth. The value of g cancels, so use of 9.8 N/kg gives the same answer.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.