Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Physics (Paper 3) Smart practice A mixed round aimed at your weak spots
Unit 1
Matter
Unit 2
Forces
Unit 3
Electricity
Unit 4
Magnetism and magnetic fields
Unit 9
Practical skills
Avg
score:
–
Topics
done:
0/36

Moments, levers and gears

Practise 15 exam-style questions on Moments, levers and gears for OCR GCSE Physics (Paper 3). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Two people push on the same revolving door at the same time, from different sides. The door turns about a vertical axis at its centre. Seen from above:

• Person P pushes at right angles to the door with a force of 60 N, at a distance of 1.2 m from the axis. On its own, this force would turn the door anticlockwise.
• Person Q pushes at right angles to the door with a force of 80 N, at a distance of 0.80 m from the axis. On its own, this force would turn the door clockwise.

What is the resultant moment on the door, seen from above?

Choose your answer.

  • A 8 N m anticlockwise
  • B 8 N m clockwise
  • C 20 N m clockwise
  • D 136 N m anticlockwise

Model answer

A (8 N m anticlockwise)

Moment of P's force = 60 × 1.2 = 72 N m anticlockwise
Moment of Q's force = 80 × 0.80 = 64 N m clockwise
Resultant moment = 72 − 64 = 8 N m anticlockwise

Explanation

Work out each moment with moment = force × perpendicular distance from the pivot (here the axis of the door), and give each one a direction. Moments in opposite directions are subtracted, and the door turns the way of the larger moment. Q pushes with the larger force, but P pushes further from the axis, so P's moment is larger: a common error is to decide the direction from the forces alone.

Mark scheme
  1. 1 mark

    A / 8 N m anticlockwise

    The only correct answer is A: moment = force × perpendicular distance from the axis, so the moment of P's force = 60 × 1.2 = 72 N m anticlockwise and the moment of Q's force = 80 × 0.80 = 64 N m clockwise. The moments act in opposite directions, so the resultant moment = 72 − 64 = 8 N m, in the direction of the larger moment (anticlockwise). B is not correct because it gives the direction of the larger force, not of the larger moment; C is not correct because 80 − 60 = 20 compares only the forces and ignores the distances; D is not correct because 72 + 64 = 136 adds two moments that act in opposite directions. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A café sign hangs from a metal bracket that is bolted to a wall. The weight of the sign is 90 N. Its weight acts along a vertical line 75 cm from the wall.

Calculate the moment of the weight of the sign about the bolts in the wall.

Give your answer in N m.

Model answer

moment = force × perpendicular distance
75 cm = 0.75 m
moment = 90 × 0.75 = 67.5 N m

Explanation

The weight of the sign acts vertically, so the perpendicular distance from the bolts to its line of action is the horizontal distance, 75 cm. The answer is wanted in N m, so the distance must be converted to metres first: 75 cm = 0.75 m. Leaving the distance in centimetres gives 6750 N cm, which is the same moment in different units but not what the question asks for.

Mark scheme
  1. 1 mark

    recall and substitution: moment = force × (perpendicular) distance = 90 × 0.75; or a correct final answer of 67.5 N m (or 68 N m) with no working

    An answer of 67.5 N m (or 68 N m) with no working scores 2 marks. ALLOW 1 mark for 6750 (the distance not converted to metres). DO NOT ALLOW 1.2 (90 ÷ 75) or 0.83 (75 ÷ 90).

  2. 1 mark

    evaluation: 67.5 (N m) / 68 (N m)

    IGNORE units (the question gives the unit).

Question 3

3 marks

A small lifting bridge over a canal has a uniform deck that is hinged at one end. The deck is 6.0 m long and has a weight of 9000 N. A chain fixed to the free end of the deck is used to raise it.

When the deck has been raised part of the way, the vertical line through the centre of the deck is 1.5 m from the hinge, measured horizontally.

Calculate the moment of the weight of the deck about the hinge:
• when the deck is horizontal
• when the deck is partly raised.

Use your answers to explain why the moment needed from the chain to hold the deck still is smaller when the deck is partly raised.

Model answer

Horizontal: the deck is uniform, so its weight acts at its centre, 3.0 m from the hinge.
moment = 9000 × 3.0 = 27 000 N m
Partly raised: moment = 9000 × 1.5 = 13 500 N m

The weight always acts vertically downwards, so its moment depends on the perpendicular (horizontal) distance from the hinge to its line of action. As the deck rises, this distance falls from 3.0 m to 1.5 m, so the moment of the weight halves. To hold the deck still, the moment of the force of the chain must equal the moment of the weight, so a smaller moment is needed.

Explanation

The distance in a moment is measured at right angles to the force, so for a weight it is the horizontal distance from the pivot to the vertical line through the centre of the object. The weight of the deck does not change as it is raised, but this distance does. A common error is to use the full 6.0 m length of the deck instead of the distance to its centre.

Mark scheme
  1. 1 mark

    horizontal: the weight acts at the centre, 3.0 m from the hinge: moment = 9000 × 3.0 = 27 000 (N m); or a correct final answer of 27 000 N m and 13 500 N m (or 14 000 N m) with no working

    An answer of 27 000 N m (horizontal) and 13 500 N m or 14 000 N m (partly raised) with no working scores marking points 1 and 2; marking point 3 needs the explanation. ALLOW recall of moment = force × (perpendicular) distance. ALLOW 2.7 × 10⁴ N m. DO NOT ALLOW 54 000 N m (the whole length of the deck, 6.0 m, used instead of the distance to its centre).

  2. 1 mark

    partly raised: moment = 9000 × 1.5 = 13 500 (N m)

    ALLOW 1.35 × 10⁴ N m / 14 000 N m.

  3. 1 mark

    the weight acts vertically, so its moment depends on the horizontal (perpendicular) distance from the hinge to its line of action; this distance is smaller (halved) when the deck is partly raised, so the moment of the weight is smaller and the chain needs to provide a smaller moment to balance it

    The idea that the perpendicular / horizontal distance has decreased is needed. ALLOW 'the moment of the chain must equal the moment of the weight (principle of moments), and the moment of the weight has halved'. DO NOT ALLOW 'the weight of the deck decreases as it rises'.

Question 4

4 marks

In a model car, an electric motor turns gear A, which has 10 teeth. Gear A meshes with gear B, which has 40 teeth. Gear C, which has 12 teeth, is fixed on the same axle as gear B, so B and C turn together. Gear C meshes with gear D, which has 36 teeth and is fixed on the axle of the wheels.

The teeth on all four gears are the same size, so the radius of each gear is proportional to its number of teeth.

The motor turns gear A at 9000 revolutions per minute, and exerts a moment of 0.015 N m on it.

Calculate the rate at which the axle of the wheels turns, in revolutions per minute, and the moment exerted on the axle of the wheels. Ignore friction.

Model answer

Gears A and B: B turns 10 ÷ 40 = 0.25 times for each turn of A.
rate of B and C = 9000 × 10 ÷ 40 = 2250 revolutions per minute
Gears C and D: rate of D = 2250 × 12 ÷ 36 = 750 revolutions per minute

The force between meshing teeth is the same on both gears, so the moment on each gear is proportional to its radius (its number of teeth).
moment on B and C = 0.015 × 40 ÷ 10 = 0.060 N m
moment on D (the axle of the wheels) = 0.060 × 36 ÷ 12 = 0.18 N m

Explanation

Work through the gear train one pair of meshing gears at a time: a larger driven gear turns more slowly but with a larger moment, by the ratio of the numbers of teeth. B and C are on the same axle, so they turn at the same rate with the same moment: do not use the ratio of their teeth. Overall the rate is divided by 12 and the moment is multiplied by 12, so the gears act as a force multiplier for the wheels.

Mark scheme
  1. 1 mark

    rate of B (and C) = 9000 × 10 ÷ 40 = 2250 (revolutions per minute); or a correct final answer of 750 revolutions per minute and 0.18 N m with no working

    Answers of 750 revolutions per minute and 0.18 N m with no working score 4 marks. An answer of 750 revolutions per minute alone with no working scores marking points 1 and 2; an answer of 0.18 N m alone with no working scores marking points 3 and 4. ALLOW the overall ratio method: (10 ÷ 40) × (12 ÷ 36) = 1/12, so the rate = 9000 ÷ 12 = 750 and the moment = 0.015 × 12 = 0.18 (4 marks). ALLOW 12.5 revolutions per second. DO NOT ALLOW the ratio of the teeth of B and C (they are on the same axle and turn together). DO NOT ALLOW 108 000 revolutions per minute or 0.00125 N m (the ratios the wrong way round).

  2. 1 mark

    rate of D (the axle of the wheels) = 2250 × 12 ÷ 36 = 750 (revolutions per minute); or a correct final answer of 750 revolutions per minute and 0.18 N m with no working

    ALLOW ECF from a wrong rate of B.

  3. 1 mark

    moment on B (and C) = 0.015 × 40 ÷ 10 = 0.060 (N m); or a correct final answer of 750 revolutions per minute and 0.18 N m with no working

    ALLOW the idea that the force between the teeth of A and B is 0.015 ÷ radius of A, and the moment on B is this force × radius of B.

  4. 1 mark

    moment on D (the axle of the wheels) = 0.060 × 36 ÷ 12 = 0.18 (N m)

    ALLOW ECF from a wrong moment on B. IGNORE units unless the question asks for them.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.