Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Physics (Paper 3) Smart practice A mixed round aimed at your weak spots
Unit 1
Matter
Unit 2
Forces
Unit 3
Electricity
Unit 4
Magnetism and magnetic fields
Unit 9
Practical skills
Avg
score:
–
Topics
done:
0/36

Pressure in fluids, force and area

Practise 10 exam-style questions on Pressure in fluids, force and area for OCR GCSE Physics (Paper 3). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 10 questions
  • 1–4 marks each
  • Instant marking
  • No sign-up needed
10 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

An ice skater has a weight of 540 N. When she glides on one skate, the pressure of the blade on the ice is 1.8 MPa.

Use the equation: pressure = force normal to a surface ÷ area of that surface

What is the area of the blade in contact with the ice?

Choose your answer.

  • A 3.0 × 10⁻⁴ m²
  • B 0.30 m²
  • C 300 m²
  • D 3.3 × 10³ m²

Model answer

A: area = force ÷ pressure = 540 ÷ (1.8 × 10⁶) = 3.0 × 10⁻⁴ m²

Explanation

Rearrange pressure = force ÷ area to area = force ÷ pressure, and convert 1.8 MPa to 1.8 × 10⁶ Pa before dividing. The blade's contact area is only about 3 cm², which is why the pressure on the ice is so large. The wrong options come from leaving out the prefix, using the wrong prefix, or dividing the wrong way round.

Mark scheme
  1. 1 mark

    A / 3.0 × 10⁻⁴ m²

    The only correct answer is A: area = force ÷ pressure = 540 ÷ 1 800 000 = 3.0 × 10⁻⁴ m² (3.0 cm²). B is not correct because it treats 1.8 MPa as 1800 Pa (540 ÷ 1800 = 0.30); C is not correct because it ignores the prefix M (540 ÷ 1.8 = 300); D is not correct because it divides the pressure by the force instead of the force by the pressure (1 800 000 ÷ 540 = 3.3 × 10³). ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

At the deep end of a swimming pool, part of the floor slopes downwards. One tile on the sloping part of the floor has an area of 0.090 m². The average pressure due to the water on the tile is 18 kPa.

Calculate the force that the water exerts on the tile, and explain why this force does not act vertically downwards.

Model answer

force = pressure × area = 18 000 × 0.090 = 1620 N
The force due to the pressure of a fluid always acts at right angles to the surface it pushes on. The tile is on a slope, so the force from the water acts at right angles to the sloping floor, pushing into it at an angle to the vertical, not straight down.

Explanation

Convert 18 kPa to 18 000 Pa and use force = pressure × area. The direction comes from the fact that the net force due to the pressure in a fluid is always normal (at right angles) to the surface; only on a horizontal floor is this force vertical. A common error is to think the force from the water must act in the same direction as the water's weight.

Mark scheme
  1. 1 mark

    force = pressure × area = 18 000 × 0.090 = 1620 (N)

    An answer of 1620 N with no working scores marking point 1. ALLOW 1600 N / 1.62 kN / 1.6 kN. ALLOW the equation recalled in any form. An answer of 1.62 with no unit (pressure left in kPa) scores 0 for this point, but ALLOW 1.62 kN.

  2. 1 mark

    the force due to the pressure of a fluid acts at right angles (normal) to the surface, and the tile slopes (is not horizontal), so the force acts at right angles to the slope / at an angle to the vertical

    ALLOW perpendicular to the tile / to the sloping floor. DO NOT ALLOW 'pressure acts in all directions' on its own, with no reference to the direction of the force on the tile. IGNORE references to the weight of the water.

Question 3

3 marks

A platform lift raises a wheelchair user. An electric pump pushes a small piston into the oil in a hydraulic system. The small piston has an area of 2.5 × 10⁻⁴ m². The oil pushes up on a large piston, which supports the platform.

The pump can push on the small piston with a force of up to 45 N. The lift must be able to raise a total mass of 270 kg (the platform, the wheelchair and its user).

Gravitational field strength = 10 N/kg

Calculate the smallest area that the large piston can have. Ignore friction.

Model answer

pressure = force ÷ area
greatest pressure in the oil = 45 ÷ 2.5 × 10⁻⁴ = 180 000 Pa
weight = mass × gravitational field strength = 270 × 10 = 2700 N
The pressure is the same throughout the oil, so for the large piston:
area = force ÷ pressure = 2700 ÷ 180 000 = 0.015 m²

Explanation

The greatest force of the pump sets the greatest pressure in the oil, and the same pressure acts on the large piston. The large piston must be large enough for this pressure to give an upward force equal to the weight, 2700 N; this is 60 times the force on the small piston, so it needs 60 times the area. Using the mass (270) instead of the weight, or putting the forces the wrong way round, are the commonest errors.

Mark scheme
  1. 1 mark

    recall and substitution: pressure = force ÷ area, so the greatest pressure in the oil = 45 ÷ 2.5 × 10⁻⁴ = 1.8 × 10⁵ (Pa); or a correct final answer of 0.015 m² with no working

    An answer of 0.015 m² with no working scores 3 marks. The marking points may be awarded in any order. ALLOW the ratio method for marking points 1 and 3: the force on the large piston must be 2700 ÷ 45 = 60 times the force on the small piston, so its area = 60 × 2.5 × 10⁻⁴. ALLOW 2 marks for 1.5 × 10⁻³ m² (the mass, 270, used as the force). ALLOW use of 9.8 N/kg when the working is shown: 2646 ÷ 1.8 × 10⁵ = 0.0147 m² (0.015 m²), for 3 marks. An answer of 4.2 × 10⁻⁶ m² (the forces used the wrong way round: 45 ÷ (2700 ÷ 2.5 × 10⁻⁴)) scores 1 mark (marking point 2).

  2. 1 mark

    weight = mass × gravitational field strength = 270 × 10 = 2700 (N); or a correct final answer of 0.015 m² with no working

    ALLOW 2646 N if 9.8 N/kg is used.

  3. 1 mark

    evaluation: the pressure is the same throughout the oil, so area of the large piston = 2700 ÷ 1.8 × 10⁵ = 0.015 (m²)

    ALLOW 1.5 × 10⁻² m² or 150 cm². ALLOW 0.0147 m² if 9.8 N/kg is used. ALLOW ECF from a wrong pressure or a wrong weight. IGNORE units unless the question asks for them.

Question 4

4 marks

A mechanic uses a hydraulic jack to lift one corner of a car. The input piston has an area of 1.5 cm² and the output piston has an area of 45 cm². The liquid in the jack cannot be compressed.

The mechanic pushes the input piston down a distance of 15 cm with a force of 120 N.

Use the equation: pressure = force normal to a surface ÷ area of that surface

Show that the work done on the input piston is equal to the work done by the output piston.

Model answer

Pressure in the liquid = 120 ÷ (1.5 × 10⁻⁴) = 8.0 × 10⁵ Pa
Force on the output piston = 8.0 × 10⁵ × (45 × 10⁻⁴) = 3600 N
The liquid cannot be compressed, so the volume pushed out by the input piston, 1.5 × 15 = 22.5 cm³, moves into the output cylinder.
Distance the output piston rises = 22.5 ÷ 45 = 0.50 cm = 0.0050 m
Work done on the input piston = 120 × 0.15 = 18 J
Work done by the output piston = 3600 × 0.0050 = 18 J
So the two amounts of work are equal.

Explanation

The jack multiplies the force by the ratio of the areas (30 times), but the same volume of liquid moves from one cylinder to the other, so the output piston moves only one-thirtieth of the distance. Work done = force × distance is therefore the same at both ends (ignoring friction), so the jack does not give out more energy than is put in. Remember to convert cm to m when calculating work in joules.

Mark scheme
  1. 1 mark

    force on the output piston = 120 × 45 ÷ 1.5 = 3600 (N) / pressure = 120 ÷ (1.5 × 10⁻⁴) = 8.0 × 10⁵ Pa, and force = 8.0 × 10⁵ × 4.5 × 10⁻³ = 3600 N

    A statement that the two amounts of work are equal on its own scores 0. ALLOW the areas left in cm² when they are used as a ratio, or a pressure of 80 N/cm² used with the area in cm².

  2. 1 mark

    the volume of liquid pushed out of the input cylinder (1.5 × 15 = 22.5 cm³) moves into the output cylinder, so the output piston rises 22.5 ÷ 45 = 0.50 cm

    ALLOW distance = 15 × 1.5 ÷ 45 = 0.50 cm / 0.0050 m / 15 ÷ 30. The idea that the same volume of liquid moves may be shown by the calculation. DO NOT ALLOW a distance found by assuming that the work done on the two pistons is equal (this assumes what the question asks the student to show).

  3. 1 mark

    work done on the input piston = 120 × 0.15 = 18 (J)

    ALLOW 1800 N cm.

  4. 1 mark

    work done by the output piston = 3600 × 0.0050 = 18 (J), which is the same

    ALLOW 1800 N cm. For this mark the work done by the output piston must be calculated from its force and the distance it moves, and compared with the work done on the input piston.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.