Practise 18 exam-style questions on Sonority: instruments, voices and timbre for AQA GCSE Music. Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.
18 questions
1–3 marks each
Instant marking
No sign-up needed
18 questions, marked as you go
Sample questions with model answers
Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.
Question 1
2 marks
Rap and beat-boxing are both used in hip-hop and pop music.
Explain the difference between rap and beat-boxing.
Model answer
Rap is rhythmic speech: the performer chants rhyming words in time with a beat instead of singing a melody. Beat-boxing uses no words at all: the performer imitates the sounds of a drum kit, such as the kick, snare and hi-hat, with the mouth and voice.
Explanation
One mark goes to each correct description. The key difference is that rap delivers words rhythmically, whereas beat-boxing makes percussion sounds with the voice and usually has no words. Saying that both 'go with the beat' does not tell them apart and earns no credit.
Mark scheme
1 mark
rap: words (often rhyming) are spoken or chanted rhythmically over a beat or backing, rather than sung to a melody
Credit the idea of rhythmic speech with words. Accept close spellings of the terms. Do not accept 'singing fast' or 'singing words' on their own.
1 mark
beat-boxing: drum and percussion sounds (and sometimes bass lines or other instruments) are imitated using only the mouth, lips, tongue and voice
Credit the idea of vocal imitation of drums or percussion. Do not accept 'using a drum machine' or 'singing the beat' without saying the sounds are drum or percussion sounds.
Question 2
3 marks
A string quartet is one of the most common chamber groups.
Name the instruments that play in a string quartet, and give one way in which chamber music such as a string quartet differs from music for a full orchestra.
Model answer
A string quartet is made up of two violins (first and second violin), a viola and a cello. Unlike an orchestra, chamber music has only one player on each part and is played without a conductor.
Explanation
The string quartet is two violins, viola and cello: there is no double bass. Chamber music is music for a small group with one player to a part, originally for playing in a room rather than a concert hall, so the players follow and lead one another without a conductor. A common slip is to add a double bass or to name only 'violin' once.
Mark scheme
1 mark
two violins / first violin and second violin
The answer must show there are two violins ('violins' in the plural is enough). Accept close spellings of instrument names when the meaning is clear.
1 mark
viola and cello
Both needed. Accept violoncello. If the answer includes a double bass or any non-string instrument among the quartet's instruments, award at most one of the two instrument marks.
1 mark
Any one of: one player to each part; a small group of (about two to ten) players; no conductor (the players lead themselves); written to be played in a room (chamber) or small hall rather than a large concert hall; every player is a soloist on their own part
Any one. Do not accept 'only strings' (an orchestra has strings too) or 'quieter' on its own.
Question 3
3 marks
Guitar parts in rock and pop music often use the abbreviations ho, po and pm.
Explain what the guitarist does for each of them.
Model answer
For ho (hammer-on) the guitarist plucks a note and then brings another finger of the fretting hand down hard on a higher fret, so a higher note sounds without a second pluck. For po (pull-off) a fretting finger is flicked off the string, sounding a lower note without plucking. For pm (palm mute) the side of the picking hand rests on the strings near the bridge, so the notes are short, dull and chugging.
Explanation
Hammer-ons and pull-offs are both done by the fretting hand alone, so the notes are smooth and legato: a hammer-on moves up in pitch and a pull-off moves down. Palm muting uses the picking hand to damp the strings, which gives the tight, percussive sound of much heavy rock rhythm playing. Answers that confuse palm muting with a string player's mute, or that do not say which way the pitch moves, are the usual errors.
Mark scheme
1 mark
ho (hammer-on): after a note is plucked, a finger of the fretting hand is brought down hard onto the string at a higher fret, so a higher note sounds without plucking again
The key idea is the fretting finger hammering onto the string to sound a (higher) note. Accept 'left hand' for the fretting hand. Accept close spellings of the terms. Do not accept 'hitting the strings with a hammer or stick'.
1 mark
po (pull-off): a fretting finger is pulled or flicked off the string, so a lower note (an open string or a note held by another finger) sounds without plucking again
The key idea is pulling the finger off the string to sound a (lower) note. Do not accept 'stopping the note' or 'releasing the string to make it silent'.
1 mark
pm (palm mute): the side of the picking hand's palm rests lightly on the strings near the bridge, so the notes sound short, muffled and percussive ('chugging')
Credit resting the hand on the strings by the bridge, or the muted, damped sound it makes, with a reference to the palm or picking hand. Do not accept 'using a mute' (as in con sordino) or 'turning the volume down'.
Question 4
3 marks
An electric guitarist plugs into an amplifier and uses two effects pedals, distortion and chorus.
Explain why an electric guitar needs amplification, and what each of the two effects does to its sound.
Model answer
An electric guitar's pickups turn the vibrations of the strings into a weak electrical signal, and a solid body hardly sounds on its own, so an amplifier and speaker are needed. Distortion overloads the signal so the sound becomes gritty and fuzzy with more sustain. Chorus mixes in slightly delayed, slightly detuned copies of the signal, so the guitar sounds thicker, as if several were playing.
Explanation
The amplification mark needs a reason (the pickups' weak signal or the lack of a resonating body), not just 'to make it louder'. Distortion changes the timbre, making it harsh and fuzzy, which is why 'louder' alone is not enough. A common error is to confuse the chorus effect with the chorus of a song: the effect thickens one instrument's sound.
Mark scheme
1 mark
amplification: the pickups turn the strings' vibrations into a weak electrical signal, which the amplifier makes louder and plays through a loudspeaker / a solid-body electric guitar has no hollow body to resonate, so on its own it is very quiet
Either point. Accept close spellings of terms when the meaning is clear. Do not accept 'to make it louder' with no reason.
1 mark
distortion: the signal is boosted or overloaded until it clips, making the sound rough, gritty, fuzzy or harsh (with more sustain)
Accept overdrive or fuzz described in this way. Do not accept 'louder' on its own, or 'echo' (that is delay or reverb).
1 mark
chorus: copies of the signal, very slightly delayed and varied in pitch, are mixed with the original so one guitar sounds like several playing together, giving a thicker, wider, shimmering sound
Credit the thicker or 'several instruments' sound, or the delayed, detuned copies. Do not accept answers about backing singers or the chorus section of a song.
Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.
Ctrl + Enter to check
Study HelperHints first, answers after you try
Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.