Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Foundation Chemistry Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 8
Atomic structure and the periodic table
Unit 9
Bonding, structure, and the properties of matter
Chemical bonds, ionic, covalent and metallic
Chemical bonds, ionic, covalent and metallic
How bonding and structure are related to the properties of substances
The three states of matter and state symbols
Properties of ionic, covalent and metallic substances
Structure and bonding of carbon
Structure and bonding of carbon
Unit 10
Quantitative chemistry
Chemical measurements, conservation of mass and the quantitative interpretation of chemical equations
Conservation of mass and relative formula mass
Mass changes, chemical measurements and concentration
Unit 11
Chemical changes
Unit 12
Energy changes
Exothermic and endothermic reactions
Exothermic and endothermic reactions
Avg
score:
–
Topics
done:
0/19

Electrolysis

Practise 25 exam-style questions on Electrolysis for AQA GCSE Combined Science (Foundation Chemistry Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 25 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
20 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Lithium chloride is an ionic compound. Molten lithium chloride is electrolysed using inert electrodes.

What is produced at the negative electrode?

Choose your answer.

  • Chlorine
  • Hydrogen
  • Lithium
  • Oxygen

Model answer

Lithium

Explanation

When a molten binary ionic compound is electrolysed, the metal is produced at the negative electrode (cathode) and the non-metal at the positive electrode (anode). Positive lithium ions are attracted to the negative electrode and lithium forms there; chloride ions form chlorine at the positive electrode. Hydrogen is a common wrong answer: it forms at the negative electrode only from aqueous solutions.

Mark scheme
  1. 1 mark

    Lithium

    If more than one option is given, 0 marks. Chlorine is wrong: it is produced at the positive electrode. Hydrogen is wrong: hydrogen is produced at the negative electrode only when water is present (aqueous solutions); molten lithium chloride contains no water. Oxygen is wrong: lithium chloride contains no oxygen.

Question 2

2 marks

Lead bromide is an ionic compound.

In a fume cupboard, a teacher puts two inert electrodes into some solid lead bromide and connects them to a low-voltage d.c. power supply. No electrolysis happens. When the lead bromide is heated until it melts, electrolysis happens.

Explain why the lead bromide must be molten for electrolysis to happen.

Model answer

In solid lead bromide the ions are held in fixed positions in a lattice, so they cannot move. When the lead bromide melts, the ions are free to move to the electrodes, so the liquid conducts and is electrolysed.

Explanation

Electrolysis needs ions that can move to the electrodes. In an ionic solid the ions are held in a giant lattice; melting the compound (or dissolving it in water) lets them move. A common error is to say that electrons move through the compound - in an electrolyte it is the ions that move.

Mark scheme
  1. 1 mark

    in the solid the ions are fixed (in position) / cannot move

    allow the ions are held in a (giant) lattice / are not free to move. Allow charged particles for ions for both marks. Do not accept references to electrons or molecules (moving or not moving) for either mark.

  2. 1 mark

    when molten the ions are free to move (to the electrodes)

    allow (when molten) the ions can move to the oppositely charged electrodes / can carry the charge (through the liquid). 'The ions can move when it is molten but not when it is solid' scores 2 marks. Ignore 'the bonds break' on its own. Ignore melting point values.

Question 3

2 marks

A student electrolysed copper sulfate solution using inert electrodes. Copper was produced at the negative electrode.

The student passed the same current for 20 minutes and measured the increase in mass of the negative electrode. The student did the experiment four times.

The table shows the results.

Calculate the mean increase in mass.

Do not include the anomalous result.

Table with columns "Experiment", "Increase in mass of negative electrode in g". Experiment: 1; Increase in mass of negative electrode in g: 0.20 | Experiment: 2; Increase in mass of negative electrode in g: 0.19 | Experiment: 3; Increase in mass of negative electrode in g: 0.27 | Experiment: 4; Increase in mass of negative electrode in g: 0.21.

Model answer

The anomalous result is 0.27 g (experiment 3).
Mean = (0.20 + 0.19 + 0.21) ÷ 3 = 0.60 ÷ 3 = 0.20 g

Explanation

An anomalous result does not fit the pattern of the others: 0.27 g is much higher than the other three, which are all close to 0.20 g. Leave it out, add the other three and divide by 3. Including the anomalous result (giving 0.22 g) is a common error.

Mark scheme
  1. 1 mark

    (0.20 + 0.19 + 0.21) ÷ 3

    allow 0.60 ÷ 3. Allow 1 mark (only) for including the anomalous result: (0.20 + 0.19 + 0.27 + 0.21) ÷ 4 = 0.2175 / 0.22.

  2. 1 mark

    = 0.20 (g)

    allow 0.2 (g). A correct answer with no working scores 2 marks. Full marks are not awarded for a correct final answer from incorrect working.

Question 4

3 marks

A student electrolysed sodium sulfate solution using inert electrodes. The student collected the hydrogen produced at the negative electrode in an upside-down measuring cylinder and recorded the total volume every minute.

The graph shows the results and a line of best fit.

Calculate the gradient of the line of best fit.

Use the equation:

gradient = increase in volume in cm³ ÷ increase in time in minutes

Give your answer in cm³ per minute.

Line graph of volume of hydrogen in cm³ (y-axis, 0 to 25) against time in minutes (x-axis, 0 to 6). "Results" is shown as plotted points only (no line), at (0, 0), (1, 3.5), (2, 7.8), (3, 11.1), (4, 15.2), (5, 18.6), (6, 22.6). "Line of best fit" joins the points (0, 0), (6, 22.5).

Model answer

From the line: at 0 minutes the volume is 0 cm³ and at 6 minutes it is 22.5 cm³.
Increase in volume = 22.5 - 0 = 22.5 cm³
Increase in time = 6 - 0 = 6 minutes
Gradient = 22.5 ÷ 6 = 3.75 cm³ per minute

Explanation

Take two points far apart on the line of best fit (not the plotted crosses), find the increase in volume and the increase in time between them, and divide volume by time. The gradient is the rate at which hydrogen is produced, 3.75 cm³ each minute. Dividing time by volume, or reading the scale wrongly, are the common mistakes.

Mark scheme
  1. 1 mark

    an increase in volume and the matching increase in time read from the line of best fit, e.g. 22.5 (cm³) in 6 (minutes) or 15 (cm³) in 4 (minutes)

    allow readings from any two points on the line, within half a small square (0.5 cm³ or 0.1 minutes).

  2. 1 mark

    (gradient =) 22.5 ÷ 6 or 15 ÷ 4

    allow ecf: correct use of incorrectly read values.

  3. 1 mark

    = 3.75 (cm³ per minute)

    allow 3.6 to 3.9 (from readings of two points far apart on the line, each within half a small square). Allow ecf from their readings for the second mark only. A correct answer with no working scores 3 marks. Full marks are not awarded for a correct final answer from incorrect working. An inverted calculation (time ÷ volume, e.g. 6 ÷ 22.5 = 0.27) scores the first mark only.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.