Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Physics (Paper 2) Smart practice A mixed round aimed at your weak spots
Avg
score:
–
Topics
done:
0/30

Uses and hazards of electromagnetic waves

Practise 16 exam-style questions on Uses and hazards of electromagnetic waves for OCR GCSE Physics (Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Electromagnetic waves are used for many different jobs.

Which job is done using gamma rays?

Choose your answer.

  • A broadcasting music to car radios
  • B cooking food in a microwave oven
  • C keeping chips warm under a heat lamp
  • D testing steel welds for cracks

Model answer

D

Explanation

Gamma rays can pass through thick metal, so engineers use them to check welds in pipelines and other steel structures for hidden cracks. Gamma rays are also used to sterilise medical equipment. The other jobs use radio waves (broadcasting), microwaves (cooking) and infrared (keeping food warm).

Mark scheme
  1. 1 mark

    D / testing steel welds for cracks

    The only correct answer is D: gamma rays can pass through thick steel, so a gamma-ray source on one side of a weld and a detector on the other side can show cracks hidden inside the metal. A is not correct because radio broadcasts use radio waves; B is not correct because a microwave oven uses microwaves; C is not correct because a heat lamp gives out infrared, which warms the food. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

Some fillings for teeth are hardened by shining a lamp on them. In the 1970s, some dentists used lamps that gave out ultraviolet. From the 1980s, dentists began to use lamps that give out blue light instead.

Explain why using blue light is safer than using ultraviolet for the patient and the dentist.

Model answer

Ultraviolet can damage the DNA in the cells of the skin, mouth and eyes, which can lead to cancer or damage to the eyes. Blue light is visible light, which has a lower frequency than ultraviolet. It does not damage DNA in the way that ultraviolet does, so it is much less hazardous to the patient and the dentist.

Explanation

Ultraviolet, X-rays and gamma rays are the groups of the electromagnetic spectrum that can damage body tissue, because their frequencies are high. Blue light has a lower frequency than ultraviolet, in the visible part of the spectrum, so it does not damage DNA in this way. It is not completely harmless, though: very bright blue light can still hurt the eyes, so dentists use orange shields to protect them.

Mark scheme
  1. 1 mark

    ultraviolet can damage (the DNA in) cells, for example in the skin, mouth or eyes, which can cause cancer or eye damage

    ALLOW ultraviolet is ionising. ALLOW ultraviolet can cause skin cancer / mutations / sunburn / cataracts / damage to the eyes. IGNORE ultraviolet is dangerous / harmful without saying what it does. DO NOT ALLOW ultraviolet makes the patient radioactive.

  2. 1 mark

    blue light is visible light, which has a lower frequency (a longer wavelength) than ultraviolet, so it does not damage DNA / is not ionising / is much less hazardous

    ALLOW blue light is not one of the groups (ultraviolet, X-rays and gamma rays) that can damage body tissue. ALLOW blue light transfers less energy than ultraviolet. A statement that blue light is safe, with no reason, does not score. DO NOT ALLOW blue light travels more slowly than ultraviolet.

Question 3

2 marks

A mobile phone and a microwave oven both use microwaves.

A student says: 'Holding a mobile phone next to my ear will cook my ear, just like food in a microwave oven.'

A microwave oven gives out microwaves with a power of 800 W. A mobile phone gives out microwaves with a power of less than 2 W.

Use this information to explain why the student is wrong.

Model answer

The phone gives out microwaves with a power of less than 2 W, compared with 800 W for the oven, so it transfers at least 400 times less energy each second. The ear absorbs only a tiny amount of energy each second, which is not enough to raise its temperature noticeably, so it is not cooked.

Explanation

Both devices use the same type of wave, so the difference is the power: the energy transferred each second. Power is energy transferred per second, so 800 W ÷ 2 W shows the oven transfers at least 400 times more energy each second. The small amount of energy absorbed from a phone is not enough to cook tissue.

Mark scheme
  1. 1 mark

    the phone gives out microwaves with a much lower power than the oven (at least 400 times lower)

    ALLOW the phone transfers much less energy each second than the oven. ALLOW 2 W compared with 800 W. IGNORE the phone uses a different type of wave (both use microwaves).

  2. 1 mark

    so the ear absorbs very little energy (each second), not enough to raise its temperature noticeably / to cook it

    ALLOW the heating effect is very small. DO NOT ALLOW phone microwaves are not absorbed by the body at all.

Question 4

4 marks

A car repair shop uses an infrared lamp to dry new paint on a steel car door.

The steel door panel has a mass of 4.0 kg. The infrared lamp warms the panel from 20 °C to 50 °C. The panel absorbs energy from the infrared at a rate of 1.5 kW.

The specific heat capacity of steel is 450 J/kg °C.

Use the equation: change in thermal energy = mass × specific heat capacity × change in temperature

Calculate the time it takes to warm the panel. Give your answer in seconds.

Assume that no energy is transferred from the panel to the surroundings.

Model answer

change in temperature = 50 − 20 = 30 °C
change in thermal energy = 4.0 × 450 × 30 = 54 000 J
power = 1.5 kW = 1500 W
energy transferred = power × time, so time = energy ÷ power
time = 54 000 ÷ 1500 = 36 s

Explanation

First find the energy needed with the specific heat capacity equation, using the change in temperature (30 °C), not the final temperature. Then use energy transferred = power × time, rearranged to time = energy ÷ power, with the power in watts. Using 50 °C instead of 30 °C gives 60 s, and forgetting to change kW to W gives 36 000 s.

Mark scheme
  1. 1 mark

    substitution: change in thermal energy = 4.0 × 450 × 30 (change in temperature = 50 − 20 = 30 °C); or a correct final answer of 36 s with no working

    An answer of 36 s with no working scores 4 marks. ALLOW an answer of 36 000 s (kilowatts not converted to watts: 54 000 ÷ 1.5) for 3 marks. ALLOW 0.6 minutes if the answer is clearly given in minutes for 3 marks (the question asks for seconds).

  2. 1 mark

    change in thermal energy = 54 000 J; or a correct final answer of 36 s with no working

    ALLOW 54 kJ.

  3. 1 mark

    recall and rearrange energy transferred = power × time: time = 54 000 ÷ 1500 (1.5 kW = 1500 W); or a correct final answer of 36 s with no working

    ALLOW ECF from a wrong energy: for example 90 000 J (from using 50 °C instead of 30 °C) ÷ 1500 = 60 s scores points 3 and 4.

  4. 1 mark

    evaluation: 36 (s)

    ALLOW ECF from a wrong energy correctly divided by 1500. IGNORE units unless the question asks for them.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.