Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Physics (Paper 2) Smart practice A mixed round aimed at your weak spots
Avg
score:
–
Topics
done:
0/30

Penetration, contamination and irradiation

Practise 15 exam-style questions on Penetration, contamination and irradiation for OCR GCSE Physics (Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A teacher demonstrates a spark counter. It has a metal gauze above a thin wire, with a high potential difference between them. Each time an alpha particle passes into the space between the gauze and the wire, a spark jumps across.

The teacher holds a sealed alpha source 2 cm above the gauze, and sparks appear. Then:
• she puts a sheet of thin card between the source and the gauze, and the sparks stop
• she removes the card and holds the source 10 cm above the gauze, and the sparks also stop.

What do her results show?

Choose your answer.

  • A Alpha particles are absorbed by thin card and by 10 cm of air.
  • B Alpha particles pass through card but are absorbed by air.
  • C The card and the air give out radiation that stops the sparks.
  • D The source gives out alpha particles only when it is close to the gauze.

Model answer

A (alpha particles are absorbed by thin card and by 10 cm of air)

Explanation

Alpha particles are the least penetrating type of nuclear radiation. They are absorbed by a sheet of paper or thin card, and by a few centimetres of air, so a detector must be very close to an alpha source. A common mistake is to think that the absorbing material gives out radiation itself.

Mark scheme
  1. 1 mark

    A / alpha particles are absorbed by thin card and by 10 cm of air

    The only correct answer is A: the sparks stop when the card is in the way, and they also stop when there is 10 cm of air between the source and the gauze, so no alpha particles get through either (alpha particles travel only a few centimetres in air). B is not correct because the sparks stopped when the card was in place, so the alpha particles did not pass through the card; C is not correct because the card and the air are not radioactive: they absorb the alpha particles, they do not give out radiation; D is not correct because the source emits alpha particles all the time: at 10 cm they are absorbed by the air before they reach the gauze. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A teacher demonstrates how beta particles are absorbed by aluminium. She places sheets of aluminium between a sealed beta source and a Geiger-Müller tube, and measures the count rate for each total thickness.

Before she brings out the source, she measures the background count rate. It is 20 counts per minute.

The table shows her results.

Use the data to find the smallest thickness of aluminium that absorbs all the beta particles from the source. Explain how you used the data.

Table with columns "Thickness of aluminium (mm)", "Count rate (counts per minute)". Thickness of aluminium (mm): 0; Count rate (counts per minute): 480 | Thickness of aluminium (mm): 0.5; Count rate (counts per minute): 330 | Thickness of aluminium (mm): 1.0; Count rate (counts per minute): 215 | Thickness of aluminium (mm): 1.5; Count rate (counts per minute): 125 | Thickness of aluminium (mm): 2.0; Count rate (counts per minute): 62 | Thickness of aluminium (mm): 2.5; Count rate (counts per minute): 31 | Thickness of aluminium (mm): 3.0; Count rate (counts per minute): 21 | Thickness of aluminium (mm): 3.5; Count rate (counts per minute): 19 | Thickness of aluminium (mm): 4.0; Count rate (counts per minute): 20.

Model answer

3.0 mm. At 3.0 mm the count rate is 21 counts per minute, which is the same as the background count rate of 20 counts per minute (within random variation), and it does not fall any further for thicker aluminium. So from 3.0 mm no beta particles reach the tube. At 2.5 mm the count rate (31) is still above background, so some beta particles are still getting through.

Explanation

The tube always detects background radiation, so the count rate never falls to zero. All the beta particles are absorbed once the count rate falls to the background value and stops falling, which first happens at 3.0 mm. Small differences such as 19 or 21 counts per minute are due to the random nature of radioactive decay.

Mark scheme
  1. 1 mark

    3.0 mm / 3 mm

    ALLOW about 3 mm. DO NOT ALLOW 2.5 mm (31 counts per minute is still above background) or 3.5 mm or 4.0 mm (not the smallest thickness).

  2. 1 mark

    at 3.0 mm (and above) the count rate has fallen to the background count rate (about 20 counts per minute), so no beta particles reach the tube / the count rate stops falling at 3.0 mm

    The idea of comparing with the background count rate, or of the count rate no longer falling, is needed. ALLOW 21 counts per minute is (almost) the same as the background of 20 counts per minute. IGNORE 'the count rate falls as the thickness increases' on its own.

Question 3

2 marks

Engineers sometimes have to repair a machine that is close to a sealed source of gamma rays. The source cannot be moved.

The engineers take turns, so that each engineer spends only a few minutes near the source.

Explain how this reduces the hazard to each engineer.

Model answer

The amount of radiation an engineer absorbs depends on how long they are irradiated. If each engineer spends only a few minutes near the source, less gamma radiation reaches their body, so fewer of their cells are damaged and the chance of harm such as cancer is smaller.

Explanation

Irradiation can be reduced by shielding, by distance and by time. Here the source cannot be moved or fully shielded, so the time each person spends near it is cut by sharing the work.

Mark scheme
  1. 1 mark

    the less time an engineer spends near the source, the less radiation reaches / is absorbed by their body / the smaller the dose they receive

    ALLOW each engineer is irradiated for a shorter time. IGNORE 'less exposure' on its own unless linked to the amount of radiation.

  2. 1 mark

    so fewer cells are damaged / ionised, so there is a smaller chance of harm such as cancer

    ALLOW less damage to DNA / smaller chance of mutations. IGNORE 'safer' on its own.

Question 4

4 marks

Substance X emits only alpha particles. Substance Y emits only gamma rays.

Compare the hazards from the two substances:
• when the substance is outside the body, a short distance away from a person
• when some of the substance has been swallowed or breathed in.

Model answer

Outside the body, substance X is almost no hazard, because its alpha particles are absorbed by a few centimetres of air or by the dead outer layer of skin, so they cannot reach living cells. Substance Y is the greater hazard outside the body, because its gamma rays penetrate the body and can irradiate the organs inside.

Inside the body, the situation is reversed. If X is swallowed or breathed in, its alpha particles are absorbed by the living cells right next to it, and they are strongly ionising, so they badly damage those cells. Most of the gamma rays from Y pass out of the body without being absorbed, so Y does less damage inside the body than X.

Explanation

Penetration decides the hazard. Outside the body only penetrating radiation such as gamma rays can reach living cells, so the gamma emitter is more hazardous. Inside the body, alpha particles are absorbed by nearby cells and do the most damage, which is why contamination by an alpha emitter is so dangerous.

Mark scheme
  1. 1 mark

    outside the body: alpha particles from X are absorbed by the air / by the outer (dead) layer of skin, so X is (almost) no hazard

    1 mark for each of marking points 1 to 4. ALLOW alpha particles cannot reach living cells from outside the body.

  2. 1 mark

    outside the body: gamma rays from Y penetrate / pass into the body, so Y is the greater hazard outside the body (by irradiation)

    ALLOW gamma rays can reach organs inside the body.

  3. 1 mark

    inside the body: alpha particles from X are absorbed by (all their energy goes into) the living cells close to the substance, so they badly damage those cells / X is the greater hazard inside the body

    ALLOW alpha particles are strongly ionising, so they cause a lot of damage to nearby cells.

  4. 1 mark

    inside the body: most gamma rays from Y pass out of the body without being absorbed, so Y is less hazardous than X inside the body

    ALLOW gamma rays are weakly ionising, so they do less damage to the cells they pass through. ORA (allow the reverse argument) for comparisons.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.