Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Physics (Paper 2) Smart practice A mixed round aimed at your weak spots
Avg
score:
–
Topics
done:
0/30

Efficiency

Practise 12 exam-style questions on Efficiency for OCR GCSE Physics (Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 12 questions
  • 1–4 marks each
  • Instant marking
  • No sign-up needed
12 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Each second, the petrol engine of a chainsaw transfers 2.0 kJ of energy usefully, to turn the chain. In the same second, the engine wastes 6.0 kJ, mostly by heating the engine, the exhaust gases and the air around it.

What is the efficiency of the engine?

Use the equation: efficiency = useful output energy transfer ÷ input energy transfer

Choose your answer.

  • A 0.25
  • B 0.33
  • C 0.75
  • D 3.0

Model answer

A - 0.25

input energy transfer = 2.0 + 6.0 = 8.0 kJ
efficiency = 2.0 ÷ 8.0 = 0.25

Explanation

The energy supplied to the engine each second is all the energy it transfers: the useful 2.0 kJ plus the wasted 6.0 kJ, which is 8.0 kJ. Then efficiency = useful output ÷ input = 2.0 ÷ 8.0 = 0.25. Dividing by the wasted energy instead of the total input gives 0.33, which is not the efficiency.

Mark scheme
  1. 1 mark

    A / 0.25

    The only correct answer is A: the input energy transfer is the useful energy plus the wasted energy, 2.0 + 6.0 = 8.0 kJ, so efficiency = 2.0 ÷ 8.0 = 0.25. B is not correct because it divides the useful energy by the wasted energy (2.0 ÷ 6.0), as if the wasted energy were the input. C is not correct because it divides the wasted energy by the input (6.0 ÷ 8.0): this is the fraction wasted, not the efficiency. D is not correct because it divides the wasted energy by the useful energy (6.0 ÷ 2.0); an efficiency can never be greater than 1. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

The box of a power bank says: 'At least 80% of the energy stored in this power bank reaches your phone.'

A student tests the power bank. While it charges her phone, the chemical store of the power bank decreases by 36 kJ, and the chemical store of the phone's battery increases by 27 kJ.

Do her results support the claim on the box? Use a calculation in your answer.

Use the equation: efficiency = useful output energy transfer ÷ input energy transfer

Model answer

efficiency = useful output energy transfer ÷ input energy transfer
efficiency = 27 ÷ 36 = 0.75 = 75%
The results do not support the claim: only 75% of the energy reached the phone, which is less than 80%.

Explanation

The input is the energy that left the power bank (36 kJ) and the useful output is the energy stored in the phone's battery (27 kJ). The efficiency is 27 ÷ 36 = 0.75, or 75%. That is below the 80% on the box, so in this test the claim is not supported; the other 9 kJ was wasted, mostly heating the power bank, the cable and the phone.

Mark scheme
  1. 1 mark

    efficiency = 27 ÷ 36 = 0.75 / 75%

    An answer of 0.75 (or 75%) with no working scores marking point 1 only. ALLOW 27 000 ÷ 36 000. ALLOW 3/4. DO NOT ALLOW 36 ÷ 27 (= 1.33) for this mark.

  2. 1 mark

    no: the efficiency is less than the value claimed on the box, so the results do not support the claim

    A comparison with the claimed 80% (0.80) is needed: 'no' on its own scores 0. ALLOW ECF from a wrong efficiency in point 1, correctly compared with 80%.

Question 3

2 marks

During one minute of a race, a cyclist's muscles transfer 1.2 × 10⁵ J of energy from the chemical store of her body. In the same minute, she does 3.0 × 10⁴ J of useful work on the pedals.

Calculate the efficiency of her muscles. Give your answer as a percentage.

Model answer

efficiency = useful output energy transfer ÷ input energy transfer
efficiency = 3.0 × 10⁴ ÷ 1.2 × 10⁵ = 0.25
efficiency = 0.25 × 100 = 25%

Explanation

The input is the energy from the chemical store of her body and the useful output is the work she does on the pedals. The powers of ten are different, so enter both numbers in standard form (or write them out: 30 000 ÷ 120 000) to get 0.25, which is 25%. Dividing 3.0 by 1.2 and ignoring the powers of ten gives 2.5, which is impossible for an efficiency; the other 75% heats her body.

Mark scheme
  1. 1 mark

    recall and substitution: efficiency = useful output energy transfer ÷ input energy transfer = 3.0 × 10⁴ ÷ 1.2 × 10⁵ (= 0.25); or a correct final answer of 25% with no working

    An answer of 25% with no working scores 2 marks. ALLOW 0.25 for 1 mark (not given as a percentage). ALLOW 30 000 ÷ 120 000. DO NOT ALLOW 1.2 × 10⁵ ÷ 3.0 × 10⁴ (= 4) for this mark.

  2. 1 mark

    evaluation: 25 (%)

    ALLOW 25 with no % sign, as the question asks for a percentage.

Question 4

3 marks

An electric motor opens a pair of heavy curtains. The motor pulls the curtains with a force of 16 N through a distance of 1.8 m.

The energy supplied to the motor while it opens the curtains is 90 J.

Calculate the efficiency of the motor.

Use the equation: work done = force × distance

Model answer

useful work done = force × distance = 16 × 1.8 = 28.8 J
efficiency = useful output energy transfer ÷ input energy transfer
efficiency = 28.8 ÷ 90 = 0.32

Explanation

The useful output of the motor is the work it does on the curtains: work done = force × distance = 16 × 1.8 = 28.8 J. The input is the 90 J supplied, so efficiency = 28.8 ÷ 90 = 0.32, or 32%. The other 61.2 J is wasted, mostly heating the motor and its gears.

Mark scheme
  1. 1 mark

    useful work done = 16 × 1.8 = 28.8 (J); or a correct final answer of 0.32 / 32% with no working

    An answer of 0.32 (or 32%) with no working scores 3 marks.

  2. 1 mark

    recall and substitution: efficiency = useful output energy transfer ÷ input energy transfer = 28.8 ÷ 90; or a correct final answer of 0.32 / 32% with no working

    ALLOW ECF from a wrong work done. DO NOT ALLOW 90 ÷ 28.8 for this mark.

  3. 1 mark

    0.32 / 32%

    ALLOW 8/25. ALLOW 32 or 0.32% for 2 marks. ALLOW ECF from a wrong work done, correctly divided.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.