Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Physics (Paper 2) Smart practice A mixed round aimed at your weak spots
Avg
score:
–
Topics
done:
0/30

Dissipation and energy transfer in domestic devices

Practise 15 exam-style questions on Dissipation and energy transfer in domestic devices for OCR GCSE Physics (Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Energy is dissipated when it is transferred to the surroundings and spreads out, so that it is stored in a less useful way.

In which of these does the energy that is transferred end up dissipated, rather than stored in a useful way?

Choose your answer.

  • A a battery being charged from the mains
  • B a bike's hot brakes cooling in the air
  • C a spring being squashed inside a toy
  • D water being pumped up into a hill reservoir

Model answer

B - a bike's hot brakes cooling in the air

Explanation

Dissipation means energy spreading out into the surroundings, usually by heating, so that it is stored in a less useful way. The energy from the hot brakes spreads through a large mass of air and raises its temperature only very slightly, so it cannot easily be used again. In the other three, energy is moved into a store (chemical, elastic potential or gravitational potential) from which it can be used again later.

Mark scheme
  1. 1 mark

    B / a bike's hot brakes cooling in the air

    The only correct answer is B: energy is transferred by heating from the thermal store of the hot brakes to the air around them, where it spreads out and raises the temperature of the air only very slightly, so it is stored in a less useful way. A is not correct because charging a battery transfers energy to its chemical store, where it is stored usefully and can be used later. C is not correct because squashing the spring stores energy usefully in its elastic potential store, ready to make the toy move. D is not correct because pumping water up stores energy usefully in its gravitational potential store, and it can be used later to generate electricity. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

Two models of cordless hair clippers, X and Y, have identical batteries. When fully charged, each battery stores the same amount of energy. Both models cut hair equally well, so the useful energy transferred each second is the same for both.

On a full charge, X runs for 60 minutes and Y runs for 90 minutes.

Suggest why Y runs for longer. Use ideas about how energy is wasted in the motors.

Model answer

Y's motor wastes less energy each second: less energy is wasted heating its coils, and there is less friction in its moving parts. Both models transfer the same useful energy each second, so Y takes less energy from its battery each second. The same chemical store therefore lasts longer, so Y runs for 90 minutes instead of 60.

Explanation

The energy supplied by the battery is the useful energy plus the wasted energy. The useful energy each second is the same for both models, so the one whose motor wastes less (by heating its coils, by friction or by sound) takes energy from its battery at a lower rate. With identical batteries, the model with the lower power runs for longer.

Mark scheme
  1. 1 mark

    Y's motor wastes less energy (each second), with a way that energy is wasted in a motor: less heating of its coils (wires) by the current / less friction in its moving parts (bearings) / less sound

    ORA (allow the reverse argument) for X throughout. Any one named way that energy is wasted in a motor is enough: these are examples of one idea. ALLOW 'less energy is transferred to the thermal store of Y's motor'. 'Y is more efficient' or 'Y wastes less energy' with no named way does not score this mark. IGNORE 'Y has a better battery' (the batteries are identical).

  2. 1 mark

    so less energy is transferred from Y's battery each second / Y has a lower (input) power, so its (chemical) store takes longer to run down

    ALLOW 'Y takes energy from its battery more slowly'. ALLOW 'Y needs less energy from its battery for the same useful energy'. DO NOT ALLOW 'Y's battery stores more energy'.

Question 3

2 marks

A cooker hood above a hob has an electric fan and two lamps. The fan removes steam and smells from the kitchen. The lamps light up the hob.

The cooker hood is plugged into the mains supply.

Describe the useful energy transfers when the fan and the lamps are switched on.

Model answer

Energy is transferred from the mains by a current to the fan's motor, which transfers energy to the kinetic store of the fan blades and the air, so the steam is carried away. Energy is also transferred by the current to the lamps, which transfer energy by light to the hob.

Explanation

A useful transfer is one that does the job the device is designed for. The cooker hood has two jobs: moving air (the motor increases the kinetic store of the fan and the air) and lighting the hob (the lamps transfer energy by light). The heating of the motor and the lamps is wasted, so it does not answer this question.

Mark scheme
  1. 1 mark

    (energy from the mains is transferred by a current to) the motor, which transfers energy to the kinetic store of the fan (blades) and the air

    ALLOW 'electrical energy to kinetic energy (of the fan)'. ALLOW 'the fan moves the air'. IGNORE wasted transfers such as heating or sound.

  2. 1 mark

    the lamps transfer energy by light (to the hob / to the surroundings)

    ALLOW 'electrical energy to light energy'. DO NOT ALLOW 'the lamps transfer energy by heating' as the useful transfer.

Question 4

4 marks

A baby bottle warmer has a power of 250 W. It is switched on for 240 s to warm some milk in a bottle.

The mass of the milk is 0.20 kg. The temperature of the milk rises from 5 °C to 37 °C.

The specific heat capacity of milk is 3900 J/kg °C.

Calculate how much energy is wasted by the bottle warmer.

Use the equations:
energy transferred = power × time
change in thermal energy = mass × specific heat capacity × change in temperature

Model answer

energy supplied = power × time = 250 × 240 = 60 000 J
change in temperature = 37 − 5 = 32 °C
useful energy = 0.20 × 3900 × 32 = 24 960 J
energy wasted = 60 000 − 24 960 = 35 040 J

Explanation

First find the total energy supplied, using energy = power × time. Then find the useful energy that went into the thermal store of the milk, using the temperature change (37 − 5 = 32 °C, not 37 °C). The wasted energy is the difference: it heats the warmer, the bottle and the air around them, and is dissipated to the surroundings. Stopping at 24 960 J gives the useful energy, not the wasted energy.

Mark scheme
  1. 1 mark

    energy supplied = 250 × 240 = 60 000 (J); or a correct final answer of 35 040 J / 35 000 J with no working

    An answer of 35 040 J or 35 000 J with no working scores 4 marks. ALLOW 31 140 J or 31 000 J for 3 marks (temperature change taken as 37 °C) and 56 100 J or 56 000 J for 3 marks (temperature change taken as 5 °C). ALLOW 24 960 J for 2 marks (the useful energy given as the final answer).

  2. 1 mark

    change in temperature = 37 − 5 = 32 (°C) and substitution 0.20 × 3900 × 32; or a correct final answer of 35 040 J / 35 000 J with no working

    ALLOW 0.20 × 3900 × (37 − 5).

  3. 1 mark

    useful energy (change in thermal energy of the milk) = 24 960 (J); or a correct final answer of 35 040 J / 35 000 J with no working

    ALLOW ECF from a wrong temperature change, correctly evaluated.

  4. 1 mark

    energy wasted = 60 000 − 24 960 = 35 040 (J) / 35 000 (J)

    ALLOW ECF from an error in either energy, correctly subtracted. ALLOW 35.04 kJ / 35 kJ. IGNORE units unless the question asks for them.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.