Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Physics (Paper 2) Smart practice A mixed round aimed at your weak spots
Avg
score:
–
Topics
done:
0/30

Practical skills: planning and making measurements

Practise 15 exam-style questions on Practical skills: planning and making measurements for OCR GCSE Physics (Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A student shines a narrow ray of light from a ray box into a glass prism. She marks the path of the ray on a sheet of paper and draws the normal at the point where the ray enters the prism.

Which instrument should she use to measure the angle between the ray and the normal?

Choose your answer.

  • A protractor
  • B ray box
  • C ruler
  • D set square

Model answer

A (protractor)

Explanation

A protractor is the instrument for measuring angles. In ray-tracing practicals the ruler draws the ray and the normal, and a set square can help to draw the normal at 90°, but the angle itself is read from a protractor placed with its centre where the ray meets the surface of the glass. The angle is measured from the normal, not from the surface.

Mark scheme
  1. 1 mark

    A / protractor

    The only correct answer is A: a protractor measures angles in degrees, so it is used to measure the angle between the ray and the normal. B is not correct because the ray box makes the ray of light; it does not measure anything. C is not correct because a ruler measures lengths and is used to draw the straight lines of the ray and the normal. D is not correct because a set square has only fixed angles (such as 90° and 45°), so it can help to draw the normal at 90° but cannot measure an angle such as 35°. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

1 mark

A teacher uses an ultraviolet lamp to make some fluorescent paint glow in a darkened room. She tells her students not to look directly at the lamp.

Explain why.

Model answer

Ultraviolet can damage the eyes, for example by harming the cells at the front of the eye. Because we cannot see most ultraviolet, a person could look at the lamp without noticing the harm it is doing.

Explanation

Ultraviolet is one of the hazardous parts of the electromagnetic spectrum: it can damage the cells of the skin and the eyes. Most of it cannot be seen, so how bright the lamp looks is not a good guide to the danger. That is why the safety rule is never to look straight at an ultraviolet lamp.

Mark scheme
  1. 1 mark

    ultraviolet (from the lamp) can damage the eyes / can harm the cells in the eyes

    ALLOW 'ultraviolet is harmful to the eyes' / 'it can cause eye damage or blindness' / 'it can cause cataracts'. ALLOW 'UV damages the skin and the eyes'. ALLOW 'we cannot see (most) ultraviolet, so we would not notice it harming our eyes' only if the harm to the eyes is also stated. IGNORE 'it is too bright' on its own. DO NOT ALLOW 'it is radioactive'.

Question 3

2 marks

A student wants to find out how much water a dripping tap wastes. She puts a measuring cylinder under the tap. In 5.0 minutes she collects 42 cm³ of water.

1 litre = 1000 cm³

Calculate how many litres of water the tap wastes in one day (24 hours).

Model answer

Water collected each minute = 42 ÷ 5.0 = 8.4 cm³
Minutes in one day = 24 × 60 = 1440
Water wasted in one day = 8.4 × 1440 = 12 096 cm³
= 12 096 ÷ 1000 = 12 litres (12.1 litres)

Explanation

First find the rate (the volume collected each minute), then multiply by the number of minutes in a day, and finally change cm³ into litres. Multiplying by 24 without changing hours into minutes gives a value 60 times too small.

Mark scheme
  1. 1 mark

    volume in one day = (42 ÷ 5.0) × 1440 = 8.4 × 1440 = 12 096 cm³ / 42 × 288 = 12 096 cm³; or a correct final answer of 12 litres (12.1 litres) with no working

    An answer of 12 litres or 12.1 litres (12.096 litres) with no working scores 2 marks. ALLOW any correct method, for example 42 cm³ in 5 minutes = 504 cm³ in one hour, and 504 × 24 = 12 096 cm³. ALLOW 12 096 cm³ or 12 100 cm³ (not converted to litres) for 1 mark. An answer of 0.2 litres (8.4 × 24 = 201.6 cm³: hours not changed into minutes) scores 1 mark (marking point 2, by ECF).

  2. 1 mark

    evaluation: 12 (litres) / 12.1 (litres) / 12.096 (litres)

    ALLOW ECF from a wrong volume in cm³ correctly converted to litres (÷ 1000).

Question 4

3 marks

A student wants to compare how much energy her family's dishwasher uses on its 'eco' programme and on its 'normal' programme. During each programme, the dishwasher heats water, pumps it around and then dries the dishes. The 'eco' programme takes longer than the 'normal' programme.

She has a plug-in energy meter that shows the total energy transferred, in kW h.

Her plan is:
• On Monday, put a full load of dishes in the dishwasher, start the 'normal' programme and read the energy meter after 10 minutes.
• On Tuesday, put a half load of dishes in the dishwasher, start the 'eco' programme and read the energy meter after 10 minutes.

Explain why her plan will not give a fair comparison of the two programmes.

Model answer

The loads are different, a full load on Monday and a half load on Tuesday, so more than one variable changes. She only reads the meter after 10 minutes, but the dishwasher uses energy at different rates during a programme, for example much faster while it heats the water than while it pumps or dries, so the first 10 minutes does not show the energy used by the whole programme. Also, the 'eco' programme lasts longer, so she needs the total energy for each complete programme. She should use the same full load, read the meter at the start and end of each whole programme, and repeat each programme a few times to find a mean.

Explanation

To compare the two programmes fairly, only the programme should change, so the load must be the same. The quantity to compare is the total energy for a complete programme, because the power changes from stage to stage and the programmes last different times. Measuring the energy for the same 10 minutes compares the rates in one stage, not the total energy used.

Mark scheme
  1. 1 mark

    the loads are different (a full load on Monday and a half load on Tuesday), so the load is not kept the same / more dishes (and water) may need more energy

    1 mark for each of points 1 to 5, max 3. ALLOW 'she should use the same load each time' for this point.

  2. 1 mark

    she only measures the energy for the first 10 minutes, but the power changes during a programme (the heating, pumping and drying stages use energy at different rates), so 10 minutes does not show the energy for the whole programme

    ALLOW 'she should read the meter at the start and at the end of each whole programme'.

  3. 1 mark

    the programmes last different times (the 'eco' programme is longer), so she should compare the total energy for each complete programme, not the energy in the same short time

    ALLOW 'a programme that uses energy more slowly may still use more energy in total because it lasts longer'.

  4. 1 mark

    she does each programme only once, so she should repeat each programme and calculate a mean

    IGNORE 'she should repeat it' on its own, with no reason or no mean.

  5. 1 mark

    she runs the programmes on different days, when the cold water supply (or the kitchen) may be at a different temperature, so the water may need different amounts of heating

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.