Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Physics (Paper 2) Smart practice A mixed round aimed at your weak spots
Avg
score:
–
Topics
done:
0/30

Mains electricity and safety

Practise 16 exam-style questions on Mains electricity and safety for OCR GCSE Physics (Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

The UK mains supply has a frequency of 50 Hz.

What is the time for one complete cycle of the mains potential difference?

Choose your answer.

  • A 50 s
  • B 0.020 s
  • C 0.0043 s
  • D 0.0020 s

Model answer

B (0.020 s)

Explanation

The frequency is the number of complete cycles each second. If there are 50 cycles in 1 second, each cycle takes 1 ÷ 50 = 0.020 s (20 ms), which is the period of the supply. Do not mix up the 230 V and the 50 Hz of the mains supply.

Mark scheme
  1. 1 mark

    B / 0.020 s

    The only correct answer is B: 50 Hz means 50 complete cycles every second, so one cycle takes 1 ÷ 50 = 0.020 s. A is not correct because 50 is the number of cycles in one second, not the time for one cycle. C is not correct because it uses the 230 V of the mains instead of the frequency (1 ÷ 230). D is not correct because it is ten times too small (a slip with the decimal point). ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

An electrician works on a switchboard while standing on a thick rubber mat.

Explain how the mat protects her if she accidentally touches a live wire.

Model answer

Rubber is an electrical insulator. Standing on the mat, she is not connected to earth, so even if she touches the live wire there is no complete path for a current through her body to earth, and almost no current passes through her.

Explanation

A dangerous shock happens when a person connects the live wire to earth, so that a current passes through their body. An insulating mat breaks that path. She must still not touch anything else that is earthed at the same time, such as a metal pipe, because that would complete the path again.

Mark scheme
  1. 1 mark

    rubber is an (electrical) insulator / has a very high resistance

    ALLOW rubber does not conduct electricity.

  2. 1 mark

    so there is no (complete) path for a current from the live wire through her body to earth / (almost) no current passes through her

    ALLOW she is not connected to earth, so no current passes through her. ALLOW the mat stops the live wire being connected to earth through her. DO NOT ALLOW the mat stops the electricity / the voltage (on its own, with no idea of current through her).

Question 3

3 marks

A toaster has a metal case. Its cable contains a live wire, a neutral wire and an earth wire.

The toaster is plugged in and switched on, but it does not heat up. An electrician finds that one of the three wires inside the cable is broken.

The broken wire could be the live wire or the neutral wire, but it cannot be the earth wire.

Explain why. Use the job of each wire in your answer.

Model answer

The live wire carries the current from the supply to the toaster, and the neutral wire completes the circuit by carrying the current back to the supply. If either of them is broken, there is no complete circuit, so there is no current and the toaster does not heat up. The earth wire is a safety wire connected to the metal case: it carries a current only if there is a fault, so the toaster would still work if only the earth wire were broken.

Explanation

When the toaster is on, the current passes along the live wire, through the heating element and back along the neutral wire, so both wires are needed for a complete circuit. The earth wire is not part of this circuit: it carries a current to earth only if a fault makes the metal case live. Do not confuse the neutral wire, which is part of the circuit, with the earth wire, which is there for safety.

Mark scheme
  1. 1 mark

    the live wire carries the current from the supply to the toaster (it is at about 230 V), so if it is broken there is no complete circuit / no current

    A statement that a break in either the live wire or the neutral wire leaves no complete circuit (no current) can count for both points 1 and 2, as long as the job of each wire is given. ALLOW the live wire connects the toaster to the 230 V of the supply. IGNORE the live wire is dangerous (on its own).

  2. 1 mark

    the neutral wire completes the circuit / carries the current back to the supply, so if it is broken there is no complete circuit / no current

    DO NOT ALLOW the neutral wire is a safety wire / carries a current only if there is a fault.

  3. 1 mark

    the earth wire is a safety wire that carries a current only if there is a fault (it is not part of the working circuit), so the toaster would still heat up if the earth wire were broken

    ALLOW there is no current in the earth wire when the toaster works normally. ALLOW the earth wire is connected to the metal case to stop it becoming live if there is a fault, so it is not needed for the toaster to work. DO NOT ALLOW the earth wire carries the current back to the supply.

Question 4

4 marks

An electric heater has a metal case. It is connected to the 230 V mains supply. When it works normally, its power is 2760 W.

Calculate the current in the live wire.

State the current in the neutral wire and the current in the earth wire when the heater works normally.

Model answer

power = potential difference × current
2760 = 230 × current
current in live wire = 2760 ÷ 230 = 12 A
Current in the neutral wire = 12 A (the same as in the live wire, because the neutral wire completes the circuit).
Current in the earth wire = 0 A (it carries a current only if there is a fault).

Explanation

Recall power = potential difference × current from your work on circuits and rearrange: current = 2760 ÷ 230 = 12 A. The live and neutral wires are parts of the same series loop through the heater, so they carry the same current. The earth wire is not part of the working circuit, so it carries no current unless there is a fault.

Mark scheme
  1. 1 mark

    recall and substitution: (power = potential difference × current) 2760 = 230 × current / current = 2760 ÷ 230; or a correct final answer of 12 A with no working

    An answer of 12 A with no working scores marking points 1 and 2 only. DO NOT ALLOW 230 ÷ 2760 (= 0.083 A) or 2760 × 230: these score 0 for points 1 and 2.

  2. 1 mark

    evaluation: 12 (A)

    IGNORE units unless the question asks for them.

  3. 1 mark

    neutral wire: 12 A / the same current as in the live wire

    ALLOW ECF: the same value as the student's calculated current in the live wire.

  4. 1 mark

    earth wire: 0 A / no current

    ALLOW there is a current in the earth wire only if there is a fault.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.