Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Biology (Paper 3) Smart practice A mixed round aimed at your weak spots
Avg
score:
–
Topics
done:
0/29

Practical skills (biology PAGs B1-B8)

Practise 22 exam-style questions on Practical skills (biology PAGs B1-B8) for OCR GCSE Biology (Paper 3). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 22 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
20 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A student used a digital thermometer to measure the temperature of a water bath five times. Without the student knowing, the thermometer always reads 2.0 °C higher than the true temperature.

Compared with readings from an accurate thermometer, what is the effect on the mean and on the spread of the five readings?

Choose your answer.

  • A The mean is the same and the spread is larger.
  • B The mean is the same and the spread is the same.
  • C The mean is too high and the spread is larger.
  • D The mean is too high and the spread is the same.

Model answer

D (The mean is too high and the spread is the same.)

Explanation

A systematic error makes every reading wrong by the same amount in the same direction, so it affects accuracy (the mean is wrong) but not precision (the spread). Repeating the readings and taking a mean cannot remove a systematic error; the thermometer must be checked against a reliable one. Random errors are different: they make readings scatter around the true value.

Mark scheme
  1. 1 mark

    D / The mean is too high and the spread is the same.

    The only correct answer is D: this is a systematic error, which shifts every reading by the same amount (2.0 °C), so the mean is 2.0 °C too high but the readings are just as close together as before. A and B are not correct because every reading, and so the mean, is too high; C is not correct because a constant error does not make the readings more spread out (random errors do that). ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A student has a stock solution of glucose with a concentration of 50 mmol/dm³ and some distilled water.

She wants to make 10 cm³ of glucose solution with a concentration of 15 mmol/dm³.

Calculate the volume of stock solution and the volume of distilled water she should mix.

Model answer

The solution must be diluted to 15 ÷ 50 = 0.3 of the stock concentration.
Volume of stock solution = 0.3 × 10 = 3 cm³
Volume of distilled water = 10 − 3 = 7 cm³

Explanation

When a solution is diluted, the fraction of the final volume that is stock solution equals the new concentration divided by the stock concentration. The rest of the volume is water. Making a set of solutions of known concentration like this lets you compare unknown samples with standards.

Mark scheme
  1. 1 mark

    volume of stock solution = 15 ÷ 50 × 10 = 3 (cm³); or a correct final answer of 3 cm³ of stock solution and 7 cm³ of water with no working

    An answer of 3 cm³ of stock solution and 7 cm³ of distilled water with no working scores 2 marks. ALLOW 3.0 cm³. An answer that swaps the two volumes (7 cm³ of stock solution and 3 cm³ of water) scores 0.

  2. 1 mark

    volume of distilled water = 10 − 3 = 7 (cm³)

    ALLOW ECF from an incorrect volume of stock solution if the two volumes add up to 10 cm³. ALLOW 7.0 cm³.

Question 3

3 marks

A student measured the height of a pea seedling with a ruler marked in millimetres.

• Height at the start: 41 mm
• Height after 24 hours: 44 mm

She concluded that the seedling grows 3 mm each day.

Explain why her value for the growth is very uncertain.

Suggest two changes to her method that would give a better estimate of the mean growth each day.

Model answer

The ruler can only be read to the nearest millimetre, so each height has an uncertainty of about ±0.5 mm. This is large compared with a change of only 3 mm, so the real growth could be anywhere from about 2 mm to 4 mm.
She could measure the height over several days and divide the total growth by the number of days, so that the change she measures is much larger than the uncertainty in each reading. She could also measure many seedlings grown in the same conditions and calculate the mean growth, which reduces the effect of random error and of differences between seedlings.

Explanation

The uncertainty in a measurement matters most when the change being measured is small compared with the resolution of the instrument. Measuring over a longer time makes the change bigger; measuring more seedlings and using a mean reduces random error. Good answers give a reason for each improvement.

Mark scheme
  1. 1 mark

    each reading can only be made to the nearest mm / has an uncertainty of about ±0.5 mm, which is large compared with a change of only 3 mm (the growth could be anywhere from about 2 mm to 4 mm)

    ALLOW the resolution of the ruler is too low for such a small change. ALLOW the percentage uncertainty is large.

  2. 2 marks

    improvements, 1 mark for each of the following, max 2:
    • measure the growth over several days and divide by the number of days, so the change measured is much larger than the uncertainty in each reading
    • measure many seedlings (grown in the same conditions) and calculate the mean growth, because seedlings vary / to reduce the effect of random error
    • use an instrument with a higher resolution, such as digital calipers
    • measure to the same fixed points each time (for example from a mark at the soil surface to the tip of the top bud), so that every reading is made in the same way / to reduce random error

    1 mark for each improvement, max 2. Each improvement needs its reason, except the instrument with a higher resolution. IGNORE repeat the measurement (unqualified). IGNORE use a more accurate ruler (unqualified).

Question 4

4 marks

Methylene blue is a blue dye that turns colourless when it is mixed with respiring yeast. The faster the yeast respires, the sooner the blue colour disappears.

A student measured the time taken for the blue colour to disappear at different temperatures. The table shows the mean times.

The rate of respiration can be found using: rate = 1 ÷ time

Calculate the percentage increase in the rate of respiration between 20 °C and 40 °C.

Explain why the rate increases.

Table with columns "Temperature (°C)", "Mean time for the blue colour to disappear (s)". Temperature (°C): 15; Mean time for the blue colour to disappear (s): 840 | Temperature (°C): 20; Mean time for the blue colour to disappear (s): 600 | Temperature (°C): 25; Mean time for the blue colour to disappear (s): 420 | Temperature (°C): 30; Mean time for the blue colour to disappear (s): 300 | Temperature (°C): 35; Mean time for the blue colour to disappear (s): 210 | Temperature (°C): 40; Mean time for the blue colour to disappear (s): 150.

Model answer

Rate at 20 °C = 1 ÷ 600 = 0.00167 per second
Rate at 40 °C = 1 ÷ 150 = 0.00667 per second
Percentage increase = (0.00667 − 0.00167) ÷ 0.00167 × 100 = 300 %
Respiration is a series of reactions controlled by enzymes. At a higher temperature the enzyme and substrate molecules have more kinetic energy, so they collide more often and more enzyme-substrate complexes form each second, so the yeast respires faster and removes the colour sooner.

Explanation

When the measurement is a time, the rate is 1 ÷ time, so a shorter time means a faster rate. The time fell to a quarter, so the rate became four times as fast, which is an increase of 300 %. Giving 400 % (four times the rate) or 75 % (the fall in time) are the common errors.

Mark scheme
  1. 1 mark

    rate at 20 °C = 1 ÷ 600 = 0.00167 (per second) and rate at 40 °C = 1 ÷ 150 = 0.00667 (per second); or a correct final answer of 300 % (or any answer from 299 to 300 %) with no working

    An answer of 300 % (or any answer from 299 to 300 %) with no working scores marking points 1, 2 and 3. ALLOW 1.67 × 10⁻³ and 6.67 × 10⁻³. ALLOW 2 marks for 400 % (the new rate as a percentage of the old rate) or for 4 times. 75 % (the percentage decrease in time) scores 0.

  2. 1 mark

    (0.00667 − 0.00167) ÷ 0.00167 × 100; or a correct final answer of 300 % (or any answer from 299 to 300 %) with no working

    ALLOW 0.005 ÷ 0.00167 × 100. ALLOW using 600 ÷ 150 = 4, then (4 − 1) × 100.

  3. 1 mark

    300 (%)

    ALLOW 299 to 300 (from rounded rates).

  4. 1 mark

    at a higher temperature, the enzymes (for respiration) and substrate molecules have more kinetic energy, so there are more frequent (successful) collisions / more enzyme-substrate complexes form

    ALLOW the reactions of respiration are controlled by enzymes, which work faster as temperature rises towards the optimum. DO NOT ALLOW the enzymes are denatured.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.