Practise 22 exam-style questions on Resistors for AQA GCSE Combined Science (Foundation Physics Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.
22 questions
1–6 marks each
Instant marking
No sign-up needed
20 questions, marked as you go
Sample questions with model answers
Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.
Question 1
1 mark
Which statement about a filament lamp is correct?
Choose your answer.
Its current flows in one direction only
Its resistance decreases as its temperature increases
Its resistance stays the same at all currents
Its resistance increases as its temperature increases
Model answer
Its resistance increases as its temperature increases
Explanation
As the current in a filament lamp increases, the filament gets hotter, and the resistance of the filament increases as its temperature increases. That is why the I–V graph of a filament lamp is a curve that gets less steep. Each wrong option describes a different component: a diode, a thermistor and a resistor at constant temperature.
Mark scheme
1 mark
Its resistance increases as its temperature increases
If more than one option is given, 0 marks. 'Its current flows in one direction only' is wrong: that describes a diode. 'Its resistance decreases as its temperature increases' is wrong: that describes a thermistor. 'Its resistance stays the same at all currents' is wrong: that describes an ohmic conductor, such as a resistor at constant temperature.
Question 2
2 marks
The graph shows how the current in component X changes as the potential difference across it changes.
Name component X.
Give a reason for your answer.
Model answer
Component X is a diode. There is no current when the potential difference is negative, so current can only flow through it in one direction.
Explanation
A diode lets current flow in one direction only: in the reverse direction its resistance is very high, so the current is zero for all negative potential differences. In the forward direction the current stays at zero until about 0.6 V and then rises steeply. A filament lamp or a resistor would also have a current for negative potential differences.
Mark scheme
1 mark
diode
Allow LED / light-emitting diode (an LED is a type of diode: its graph has the same shape, with no current in the reverse direction, although it starts to conduct at a larger forward potential difference). Allow phonetic spellings such as 'dyode'. Do not accept LDR, thermistor, filament lamp or resistor.
1 mark
there is no current for negative potential differences / current flows in one direction only
The reason only scores if diode (or LED) is given. Allow there is no current until the potential difference is about 0.6 V, then the current increases steeply. Allow it has a very high resistance in the reverse direction.
Question 3
2 marks
A student investigated the current in a diode for potential differences up to 0.7 V.
She measured the current with a milliammeter that reads to 0.1 mA, instead of an ammeter that reads to 0.01 A.
Suggest why the milliammeter was a better choice.
Model answer
Up to 0.7 V the currents in the diode are very small, only a few milliamps. The milliammeter has a higher resolution, so it can measure these small currents; the ammeter would show 0.00 A or 0.01 A for most readings.
Explanation
Resolution is the smallest change a meter can show. The ammeter shows changes of 0.01 A (10 mA), but most of the diode currents are smaller than this, so it would read 0.00 A for them. The milliammeter shows changes of 0.1 mA, so it gives useful readings.
Mark scheme
1 mark
the currents in the diode are very small / only a few milliamps
Allow most currents are less than 0.01 A / 10 mA.
1 mark
the milliammeter has a higher resolution / can measure smaller currents (or smaller changes in current)
Allow the ammeter would read 0.00 A for most of the readings. Allow the readings are more precise. Ignore 'more accurate' on its own.
Question 4
4 marks
A technician tested the 12 V filament lamp from a workshop inspection light. The table shows the current in the lamp at different potential differences.
Calculate the resistance of the lamp at 2.0 V and at 12.0 V.
Use the equation:
potential difference = current × resistance
Explain why the resistance of the lamp changes.
Model answer
At 2.0 V: resistance = 2.0 ÷ 0.80 = 2.5 Ω At 12.0 V: resistance = 12.0 ÷ 2.00 = 6.0 Ω As the current increases, the filament gets hotter. The resistance of the filament increases as its temperature increases, so the resistance of the lamp increases.
Explanation
Rearrange to resistance = potential difference ÷ current for each reading: 2.5 Ω at 2.0 V and 6.0 Ω at 12.0 V. The larger current heats the filament, and the resistance of a filament lamp increases as the temperature of the filament increases. Answers that say only 'more current means more resistance' miss the link to temperature.
Mark scheme
1 mark
at 2.0 V: resistance = 2.0 ÷ 0.80 = 2.5 (Ω)
A correct answer with no working scores full marks for each calculation. Full marks are not awarded for a correct final answer from incorrect working. Do not accept 0.4 (from 0.80 ÷ 2.0).
1 mark
at 12.0 V: resistance = 12.0 ÷ 2.00 = 6.0 (Ω)
Allow 6 (Ω).
1 mark
(as the current increases) the temperature of the filament increases / the filament gets hotter
Allow the current heats the filament. Ignore 'the lamp gets brighter'.
1 mark
the resistance of the filament increases as its temperature increases
Do not accept 'the resistance increases because the current increases' with no link to temperature.
Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.
Ctrl + Enter to check
Study HelperHints first, answers after you try
Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.