Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Foundation Physics Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 18
Energy
Energy changes in a system, and the ways energy is stored before and after such changes
Energy stores and systems, and changes in energy
Energy changes in systems
Power
Conservation and dissipation of energy
Energy transfers in a system and efficiency
National and global energy resources
National and global energy resources
Unit 19
Electricity
Unit 20
Particle model of matter
Changes of state and the particle model
Density of materials and changes of state
Particle model and pressure
Particle motion in gases
Unit 21
Atomic structure
Avg
score:
–
Topics
done:
0/17

Density of materials and changes of state

Practise 20 exam-style questions on Density of materials and changes of state for AQA GCSE Combined Science (Foundation Physics Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 20 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
20 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A student wants to find the volume of a small stone with an irregular shape.

Name the piece of apparatus that has a spout and is used with a measuring cylinder to find the volume of an irregular object by displacement.

Model answer

A eureka can

Explanation

A eureka (displacement) can is filled with water up to its spout. When the stone is lowered in, the water it pushes out flows from the spout into a measuring cylinder, and the volume of water collected equals the volume of the stone. Some students confuse 'displacement' here with displacement reactions in chemistry.

Mark scheme
  1. 1 mark

    eureka can

    allow displacement can / overflow can. ignore spelling if the meaning is clear (e.g. 'yureka can'). do not accept beaker / measuring jug / burette.

Question 2

2 marks

When a candle is lit, some of the wax melts. Some of the wax also burns.

Explain why melting is a physical change but burning is a chemical change.

Model answer

Melting is a physical change because when the melted wax cools it becomes solid wax again with all its original properties. Burning is a chemical change because the wax reacts to make new substances, such as carbon dioxide and water, so the wax cannot recover its original properties.

Explanation

Changes of state are physical changes: if the change is reversed, the material recovers its original properties. Burning makes new substances, so it cannot be reversed in this way. Answers need to say what happens in each change, not just call one 'reversible'.

Mark scheme
  1. 1 mark

    melting: when the melted wax cools (and solidifies) it recovers its original properties / the change can be reversed

    allow the wax is still wax / no new substance is made when it melts. ignore 'melting is reversible' with no idea of the wax being the same afterwards for this mark.

  2. 1 mark

    burning: new substances are made (e.g. carbon dioxide and water), so the wax cannot get back its original properties

    allow the change cannot be reversed / you cannot get the wax back. ignore 'it is a reaction' on its own.

Question 3

2 marks

A student used a eureka can to find the volume of a metal object. She lowered the object into the can on a thread and collected the water that came out of the spout.

She did not fill the eureka can with water up to the spout before she lowered the object in.

Explain how this would affect the density of the metal that she calculated.

Model answer

Because the can was not full, some of the water the object displaced just filled the can up to the spout instead of flowing out. So the volume of water collected was smaller than the volume of the object. Density = mass ÷ volume, so dividing by a volume that is too small gives a density that is too high.

Explanation

The water level must start at the spout so that every cm³ the object displaces flows out into the measuring cylinder. If it starts lower, too little water is collected, the volume is too small and the calculated density is too big. Saying only 'the result would be wrong' does not explain the effect.

Mark scheme
  1. 1 mark

    some of the water pushed aside (displaced) by the object stays in the can, so the volume of water collected is less than the volume of the object

    allow the volume measured would be too small. ignore 'the results would be inaccurate' on its own.

  2. 1 mark

    so the calculated density would be too high / greater than the true value

    allow ecf: 'the volume is too small so the density is too big'. do not accept the density would be too low.

Question 4

3 marks

A classroom is 8.0 m long, 6.0 m wide and 3.0 m high.

The density of the air in the classroom is 1.2 kg/m³.

Calculate the mass of the air in the classroom.

Use the equation:

density = mass ÷ volume

Model answer

volume = 8.0 × 6.0 × 3.0 = 144 m³
1.2 = mass ÷ 144
mass = 1.2 × 144
mass = 172.8 kg

Explanation

First find the volume of the room (144 m³), then rearrange density = mass ÷ volume to mass = density × volume = 1.2 × 144 = 172.8 kg. Air has a low density because its particles are far apart, but a whole room of air still has a mass of over 170 kg. Dividing the volume by the density is the usual mistake.

Mark scheme
  1. 1 mark

    volume = 8.0 × 6.0 × 3.0 = 144 (m³)

    a correct answer with no working scores full marks.

  2. 1 mark

    mass = 1.2 × 144

    allow ecf from their volume. allow 1.2 = mass ÷ 144.

  3. 1 mark

    mass = 172.8 (kg)

    allow 173 (kg) / 170 (kg). full marks are not awarded for a correct final answer from incorrect working. 120 (144 ÷ 1.2) scores 1 mark (for the volume).

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.