Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Foundation Physics Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 18
Energy
Energy changes in a system, and the ways energy is stored before and after such changes
Energy stores and systems, and changes in energy
Energy changes in systems
Power
Conservation and dissipation of energy
Energy transfers in a system and efficiency
National and global energy resources
National and global energy resources
Unit 19
Electricity
Unit 20
Particle model of matter
Changes of state and the particle model
Density of materials and changes of state
Particle model and pressure
Particle motion in gases
Unit 21
Atomic structure
Avg
score:
–
Topics
done:
0/17

Energy transfers in a system and efficiency

Practise 23 exam-style questions on Energy transfers in a system and efficiency for AQA GCSE Combined Science (Foundation Physics Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 23 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
20 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Ravi stirs a pan of hot soup, first with a metal spoon and then with a wooden spoon of the same size. The handle of the metal spoon gets hot much more quickly.

Which statement explains this?

Choose your answer.

  • Metal has a lower thermal conductivity than wood
  • Metal has a higher thermal conductivity than wood
  • Wood does not allow any energy transfer by conduction
  • Metal spoons create thermal energy when stirred

Model answer

Metal has a higher thermal conductivity than wood

Explanation

The higher the thermal conductivity of a material, the higher the rate of energy transfer by conduction through it. Energy is transferred along the metal handle quickly, so it soon gets hot; wood has a low thermal conductivity, which is why many spoons and pan handles are made of wood or plastic. Mixing up 'high thermal conductivity' with 'good insulator' is a common mistake.

Mark scheme
  1. 1 mark

    Metal has a higher thermal conductivity than wood

    If more than one option is given, 0 marks. 'Lower thermal conductivity' reverses the idea: the material with the higher thermal conductivity transfers energy by conduction at the higher rate. Wood does conduct, but at a much lower rate than metal. Energy cannot be created, and stirring does not make the handle hot.

Question 2

2 marks

A hot metal block is lowered into a beaker of cold water. The beaker is inside a sealed box that is perfectly insulated, so no energy can enter or leave the box. Everything inside the box is a closed system.

Describe what happens to the energy in the closed system until the block and the water are at the same temperature.

Model answer

Energy is transferred from the thermal energy store of the hot block to the thermal energy store of the cold water (and the beaker), so the block cools down and the water warms up. Because it is a closed system, the total energy stays the same: there is no net change in the total energy.

Explanation

In a closed system energy can be transferred between stores, but the total energy cannot change. Here energy moves from the thermal store of the hot block to the thermal store of the cooler water until they are at the same temperature. A common mistake is to say that energy is lost as the block cools: it has only moved to another store inside the system.

Mark scheme
  1. 1 mark

    energy is transferred from the thermal energy store of the (hot) block to the thermal energy store of the (cold) water (and the beaker)

    allow the thermal energy store of the block decreases and the thermal energy store of the water increases; allow internal energy for thermal energy; allow the block cools down and the water warms up because energy is transferred from the block to the water. 'Heat moves from the block to the water' alone is not enough: the answer must refer to energy being transferred. Do not accept energy transferred from the water to the block, or 'cold' transferred to the block.

  2. 1 mark

    the total energy of the system stays the same / there is no net change in the total energy

    allow energy is conserved / energy is not created or destroyed, so the total stays the same. Do not accept 'the total energy decreases because the block cools' or 'energy is lost'.

Question 3

2 marks

A games console has a power supply that is plugged into the mains.

total power input to the power supply = 160 W
useful power output of the power supply = 136 W

Calculate the efficiency of the power supply. Give your answer as a percentage.

Use the equation:

efficiency = useful power output ÷ total power input

Model answer

efficiency = 136 ÷ 160 = 0.85
0.85 × 100 = 85%

Explanation

Efficiency can be calculated from powers in the same way as from energies: useful power output ÷ total power input. To change a decimal into a percentage, multiply by 100. The other 24 W is wasted, mostly by heating the power supply and the air around it.

Mark scheme
  1. 1 mark

    efficiency = 136 ÷ 160 / efficiency = 0.85

    An answer of 0.85 with no percentage scores this mark only.

  2. 1 mark

    85 (%)

    Do not accept 118% (160 ÷ 136). A correct answer with no working scores full marks, but full marks are not awarded for a correct final answer from incorrect working.

Question 4

4 marks

A student wants to compare the thermal conductivity of four metals: copper, aluminium, brass and steel.

The student has:
- a rod of each metal, all the same length and diameter
- a Bunsen burner and a heat-proof mat
- a tripod
- petroleum jelly and four drawing pins
- a stopwatch.

Petroleum jelly melts when it is warmed.

Describe a method the student could use.

Model answer

Stand the Bunsen burner on the heat-proof mat. Lay the four rods on the tripod so that one end of each rod is close together over the place where the flame will be. Use a small blob of petroleum jelly to stick a drawing pin to the other end of each rod, using the same amount of jelly each time, so that every pin is the same distance from the heated end. Wear safety goggles. Light the Bunsen burner, put it under the ends of the rods and start the stopwatch at the same moment. Record the time when each pin falls off. The pin on the metal with the highest thermal conductivity falls first, because energy is transferred along that rod at the highest rate. Let the rods cool to room temperature, then repeat the test and calculate a mean time for each metal. Do not touch the rods until they have cooled.

Explanation

A valid method heats one end of every rod in the same way and measures the same thing for each rod - here the time for the pin at the far end to drop. You must also say how the results compare the metals: the shorter the time, the higher the thermal conductivity. Answers often leave out how the rods are heated equally, or never say what is measured.

Mark scheme
  1. 4 marks

    Levels of response (4 marks).
    Level 2 (3-4 marks): The method would lead to the production of a valid outcome. All key steps are identified and logically sequenced.
    Level 1 (1-2 marks): The method would not lead to a valid outcome. Some relevant steps are identified, but links are not made clear.
    No relevant content: 0 marks.

    Indicative content (not a checklist; credit other valid points):
    - stand the Bunsen burner on the heat-proof mat
    - place the rods on the tripod with one end of each rod close together over the flame, so that each rod is heated in the same way
    - use petroleum jelly to stick a drawing pin to the other end of each rod, the same distance from the heated end
    - use the same amount of petroleum jelly for each pin
    - light the Bunsen burner, put it under the ends of the rods and start the stopwatch
    - record the time taken for each pin to fall off
    - the shorter the time, the higher the rate of energy transfer along the rod, so the higher the thermal conductivity
    - let the rods cool to room temperature, repeat the test and calculate a mean time for each metal
    - safety: do not touch the rods until they have cooled; wear safety goggles
    Allow testing one rod at a time if each rod is heated in the same way (same flame, same length in the flame).
    For Level 2, the answer must include heating one end of each rod in the same way, timing how long the pin at the other end takes to fall, and how the times are used to compare the metals.
    Common errors: heating the rods by different amounts; not saying what is measured; putting the pin at the heated end.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.