Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Edexcel GCSE Chemistry (Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Key concepts in chemistry
Unit 2
States of matter and mixtures
Unit 3
Chemical changes
Unit 4
Extracting metals and equilibria
Unit 5
Separate chemistry 1
Avg
score:
–
Topics
done:
0/33

Fertilisers and the production of ammonium sulfate

Practise 13 exam-style questions on Fertilisers and the production of ammonium sulfate for Edexcel GCSE Chemistry (Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 13 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
13 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Ammonium sulfate fertiliser is made in chemical plants, and a student can also make a small sample of it in a school laboratory.

Which of these is a feature of the industrial production of ammonium sulfate but not of its laboratory preparation?

Choose your answer.

  • A an indicator shows the end point
  • B includes making ammonia from N₂ and H₂
  • C dilute solutions are used
  • D crystals are dried on filter paper

Model answer

B - includes making ammonia from N₂ and H₂.

Explanation

The laboratory preparation uses ammonia solution and dilute sulfuric acid that have already been made, so it needs only a titration followed by crystallisation. Industrial production starts from raw materials, such as air, natural gas, sulfur and water, and needs several stages to make the ammonia and the sulfuric acid before they react. The other three options all describe the small-scale laboratory method.

Mark scheme
  1. 1 mark

    B / includes making ammonia from N₂ and H₂ (1)

    The only correct answer is B: industrial production needs several stages, in which ammonia is made from nitrogen and hydrogen (the Haber process) and sulfuric acid is made from its raw materials, before they react; the laboratory starts with ready-made ammonia solution and dilute sulfuric acid. A is not correct because using an indicator to find the end point of a titration is part of the laboratory method. C is not correct because dilute solutions are used in the laboratory; industry uses ammonia gas and concentrated acid. D is not correct because drying crystals between filter papers is a small-scale laboratory technique. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

In industry, ammonium sulfate is produced from ammonia and sulfuric acid. The ammonia is made in the Haber process.

Factories that produce ammonium sulfate are often built next to factories that make ammonia.

Suggest two reasons why.

Model answer

The ammonia does not have to be transported, because it can be piped straight from one factory to the other, so transport costs are lower. Ammonia is toxic, so not moving it by road or rail also reduces the risk of leaks or accidents.

Explanation

Industrial production of ammonium sulfate needs several stages, and the product of one stage is the raw material of the next. Siting the stages together saves the cost and the risk of moving a toxic gas, and gives a continuous supply. 'It is cheaper' or 'it is safer' needs a reason to gain a mark.

Mark scheme
  1. 1 mark

    the ammonia does not need to be transported (far) / can be piped straight from one factory to the other, so transport costs are lower (1)

    Any two from the four points; max 2. Accept 'less fuel / energy is used for transport'. 'No need to transport ammonia' and 'cheaper transport' are the same point.

  2. 1 mark

    less risk of ammonia escaping / of leaks or accidents during transport, which matters because ammonia is toxic / harmful (1)

    Accept 'safer, because toxic ammonia is not carried on roads or railways'. Ignore 'safer' on its own.

  3. 1 mark

    a (reliable) continuous supply of ammonia for the ammonium sulfate factory (1)

    Accept 'the ammonia is available whenever it is needed'.

  4. 1 mark

    the factories can share services / workers / energy supplies / heat (1)

    Accept any other sensible shared resource, e.g. a shared supply of cooling water or a shared railway siding. Ignore 'it is cheaper' with no reason.

Question 3

3 marks

A farmer tests fertilisers on four areas of wheat in a field where the soil contains little nitrogen, phosphorus or potassium. The areas are the same size and are treated in the same way, except for the fertiliser added.

The table shows the fertiliser added to each area and the mass of grain harvested from it.

Explain what the results show about the elements that the wheat needs for growth. Use data from the table in your answer.

Table with columns "Area", "Fertiliser added", "Mass of grain harvested in kg". Area: A; Fertiliser added: none; Mass of grain harvested in kg: 200 | Area: B; Fertiliser added: potassium phosphate; Mass of grain harvested in kg: 230 | Area: C; Fertiliser added: ammonium nitrate; Mass of grain harvested in kg: 540 | Area: D; Fertiliser added: ammonium nitrate and potassium phosphate; Mass of grain harvested in kg: 800.

Model answer

Ammonium nitrate supplies nitrogen, and potassium phosphate supplies phosphorus and potassium. Nitrogen has the biggest effect on its own: adding ammonium nitrate increased the mass of grain from 200 kg to 540 kg, but potassium phosphate on its own increased it only to 230 kg. The greatest mass of grain, 800 kg, was obtained when all three elements were supplied, so the wheat needs nitrogen, phosphorus and potassium for the best growth. Phosphorus and potassium increased the mass of grain by 260 kg when nitrogen was also added, compared with only 30 kg without nitrogen, so the shortage of nitrogen was limiting the growth of the wheat.

Explanation

First decide which elements each compound supplies: both ions in ammonium nitrate contain nitrogen, and potassium phosphate contains potassium and phosphorus. Then compare areas that differ by one fertiliser and quote the data. A common error is to conclude that phosphorus and potassium have no effect because area B gave little more grain than area A; area D shows that they increase the yield a lot when nitrogen is also supplied.

Mark scheme
  1. 1 mark

    ammonium nitrate supplies (only) nitrogen and potassium phosphate supplies (only) phosphorus and potassium (1)

    Any three from the four points; max 3. Max 2 if no data from the table are used. Both compounds must be correctly linked to their elements for this point. Ignore 'fertilisers increase the yield' or 'fertilisers help plants grow' on their own, which only repeat the idea of the question.

  2. 1 mark

    nitrogen has the biggest effect: nitrogen alone (area C) increases the mass of grain from 200 kg to 540 kg / by 340 kg, but phosphorus and potassium alone (area B) increase it by only 30 kg (1)

    Accept a comparison of areas A, B and C in words with data, e.g. 'C gave 540 kg but B only 230 kg'. Do not accept 'phosphorus and potassium have no effect'.

  3. 1 mark

    the greatest mass of grain, 800 kg (area D), is obtained when all three elements are supplied, so the wheat needs nitrogen, phosphorus and potassium (for the best growth) (1)

    Accept 'NPK gives the highest yield'. The idea that all three elements are needed, or that the combination gives the most growth, is required; 'area D is the best' on its own is not enough.

  4. 1 mark

    phosphorus and potassium increase the mass of grain much more when nitrogen is also supplied (by 260 kg, from 540 kg to 800 kg, compared with 30 kg without nitrogen) / without nitrogen the shortage of nitrogen limits growth, so adding phosphorus and potassium has little effect (1)

    Accept 'nitrogen is the limiting factor in this soil'. Accept 'adding both fertilisers together increases the mass of grain by 600 kg, more than the two separate increases added together (340 + 30 = 370 kg)'.

Question 4

4 marks

A student prepares ammonium sulfate solution in the laboratory. She evaporates some of the water until, at 70 °C, the solution is saturated: it contains the maximum mass of ammonium sulfate that can dissolve at this temperature. The solution then contains 50 g of water. She leaves it to cool to 30 °C, and crystals of ammonium sulfate form.

The graph shows how the solubility of ammonium sulfate changes with temperature.

(Data: published solubility values, rounded to the nearest gram)

Use the graph to calculate the mass of crystals that form.

Explain why most of the ammonium sulfate is still dissolved in the solution at 30 °C.

Line graph of solubility in g per 100 g of water (y-axis, 60 to 110) against temperature in °C (x-axis, 0 to 100). The line is a smooth curve through (0, 71), (20, 75), (40, 81), (60, 87), (80, 94), (100, 103).

Model answer

At 70 °C the solubility is about 90.5 g per 100 g of water, and at 30 °C it is about 78 g per 100 g of water.
Mass of crystals from 50 g of water = (90.5 - 78) ÷ 2 = 6.25 g
The solubility of ammonium sulfate decreases only slightly as the solution cools, so at 30 °C the 50 g of water can still dissolve about 39 g of it. Only about 6 g of the 45 g that was dissolved at 70 °C crystallises, so most of it stays in solution.

Explanation

Read the solubility at both temperatures from the curve, subtract, then halve, because the graph is for 100 g of water and the solution contains 50 g. Ammonium sulfate is very soluble even in cold water, so a solution must be concentrated by evaporating water before crystals will form, and much of the salt stays in the remaining solution. Forgetting to halve the difference is a common error.

Mark scheme
  1. 1 mark

    readings from the graph: about 90.5 g per 100 g of water at 70 °C and about 78 g per 100 g of water at 30 °C (1)

    An answer of 6.25 g with no working scores MP1 and MP2. Accept readings from 89 to 92 at 70 °C and from 77 to 79 at 30 °C. Accept the readings halved for 50 g of water (about 45 g and 39 g).

  2. 1 mark

    (90.5 - 78) ÷ 2 = 6.25 / 6.3 (g) (1)

    Accept answers from 5.0 to 7.5 g that follow from the student's readings. ECF from incorrect readings. 12.5 g (not divided by 2 for 50 g of water) scores MP1 only.

  3. 1 mark

    the solubility of ammonium sulfate decreases only slightly as the temperature falls / changes very little with temperature (1)

    Accept 'the curve is quite flat / not steep'. Ignore 'solubility decreases when it cools' with no idea of how little.

  4. 1 mark

    so at 30 °C the water can still dissolve about 78 g per 100 g of water / about 39 g in 50 g of water / only about 6 g of the 45 g that was dissolved crystallises (1)

    The answer must use a value from the graph or the calculation. Accept 'only about a seventh / 14 % of the dissolved ammonium sulfate forms crystals'.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.