Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Edexcel GCSE Chemistry (Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Key concepts in chemistry
Unit 2
States of matter and mixtures
Unit 3
Chemical changes
Unit 4
Extracting metals and equilibria
Unit 5
Separate chemistry 1
Avg
score:
–
Topics
done:
0/33

Bases, salts and neutralisation

Practise 15 exam-style questions on Bases, salts and neutralisation for Edexcel GCSE Chemistry (Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Lithium carbonate reacts with dilute sulfuric acid.

Name the salt formed in this reaction.

Model answer

Lithium sulfate.

Explanation

A metal carbonate reacts with an acid to form a salt, water and carbon dioxide. The salt is named from the metal (lithium) and the acid: sulfuric acid forms sulfates. Students sometimes confuse sulfate (from sulfuric acid) with sulfide.

Mark scheme
  1. 1 mark

    lithium sulfate (1)

    accept Li₂SO₄ / Li2SO4; accept lithium sulphate. Do not accept lithium sulfide / lithium sulfite / lithium carbonate / lithium hydrogensulfate. If water and carbon dioxide are also given, ignore them.

Question 2

2 marks

A thin layer of oxide on aluminium foil means that it reacts slowly with dilute hydrochloric acid at first. After a few minutes the foil fizzes steadily. The products are aluminium chloride, AlCl₃, and hydrogen gas.

Write a balanced equation to show aluminium reacting with hydrochloric acid.

Model answer

2Al + 6HCl → 2AlCl₃ + 3H₂

Explanation

A metal reacts with an acid to form a salt and hydrogen. Each AlCl₃ needs three chlorine atoms, so two Al give 2AlCl₃ needing 6HCl; the six hydrogen atoms then form 3H₂. A common error is writing hydrogen as H rather than the molecule H₂.

Mark scheme
  1. 1 mark

    correct formulae: Al + HCl → AlCl₃ + H₂ (1)

    MP1: all four formulae correct on the correct sides and no other species. Students type formulae as plain text, so accept Al + HCl -> AlCl3 + H2, and accept '=' for the arrow. Do not accept H or 2H for hydrogen, Cl or Cl₂ in place of HCl. Ignore state symbols, even if incorrect.

  2. 1 mark

    balancing: 2Al + 6HCl → 2AlCl₃ + 3H₂ (1)

    MP2 depends on MP1: balancing of the correct formulae only. Allow multiples, including halves, e.g. 4Al + 12HCl → 4AlCl₃ + 6H₂ or Al + 3HCl → AlCl₃ + 1½H₂ (typed 1.5H2).

Question 3

3 marks

Asha adds iron filings to dilute sulfuric acid. Bubbles of gas form. She collects some of the gas in a test tube and puts a glowing splint into the tube. The splint does not relight.

Asha concludes that the gas is not hydrogen.

Explain why Asha's conclusion is not valid, and describe the correct test for hydrogen.

Model answer

Asha's conclusion is not valid because a glowing splint is the test for oxygen; hydrogen does not relight a glowing splint, so her result does not show that the gas is not hydrogen. To test for hydrogen she should hold a lighted splint at the mouth of the test tube of gas. If the gas is hydrogen, it burns with a squeaky pop.

Explanation

The test for hydrogen uses a lighted (burning) splint, which gives a squeaky pop; a glowing splint relights in oxygen. Examiners have reported that some students describe a glowing splint for hydrogen, and that just writing 'the squeaky pop test' without describing the test does not score. Iron does react with dilute sulfuric acid to give hydrogen, so the gas is very likely to be hydrogen.

Mark scheme
  1. 1 mark

    a glowing splint (relighting) is the test for oxygen / hydrogen does not relight a glowing splint (so the result does not show the gas is not hydrogen) (1)

    accept 'she used the wrong test' only if the answer also says a glowing splint tests for oxygen or does not show hydrogen. Ignore 'the splint was not lit' on its own for this mark (it can score MP2).

  2. 1 mark

    put a lighted / burning splint (into or at the mouth of the tube of gas) (1)

    accept apply a flame / ignite the gas. Reject glowing splint. Ignore 'squeaky pop test' on its own (the test must be described).

  3. 1 mark

    (squeaky) pop (1)

    MP3 depends on MP2. Do not accept 'the splint relights' / 'the splint goes out' on its own.

Question 4

4 marks

A student adds a small amount of each of three solids to separate test tubes of dilute sulfuric acid. The acid is in excess each time.

The table shows her observations.

Explain the observations for all three solids.

Table with columns "Solid added", "Observations". Solid added: zinc granules; Observations: bubbles form steadily; zinc gets smaller; colourless solution forms | Solid added: zinc oxide (white powder); Observations: powder disappears; no bubbles; colourless solution forms | Solid added: zinc carbonate (white powder); Observations: fizzes; powder disappears; colourless solution forms.

Model answer

All three solids react with the sulfuric acid to form the salt zinc sulfate. Zinc sulfate is soluble, so each solid disappears and leaves a colourless solution.
Zinc is a metal, so it reacts with the acid to form zinc sulfate and hydrogen; the hydrogen gas causes the bubbles.
Zinc carbonate reacts to form zinc sulfate, water and carbon dioxide; the carbon dioxide gas causes the fizzing.
Zinc oxide is a base, so it reacts to form zinc sulfate and water only. No gas is formed, so there are no bubbles.

Explanation

The general reactions explain the observations: metals give a salt and hydrogen, metal oxides give a salt and water, and metal carbonates give a salt, water and carbon dioxide. The two gases cause bubbles, while the oxide reaction produces no gas. Each solid is used up because the salt formed, zinc sulfate, is soluble in water.

Mark scheme
  1. 1 mark

    zinc: bubbles because hydrogen (gas) is formed (1)

    An explanation linking each observation to the products. accept zinc + sulfuric acid → zinc sulfate + hydrogen. Do not accept carbon dioxide or oxygen for zinc.

  2. 1 mark

    zinc carbonate: fizzes because carbon dioxide (gas) is formed (1)

    accept zinc carbonate + sulfuric acid → zinc sulfate + water + carbon dioxide. Do not accept hydrogen for zinc carbonate.

  3. 1 mark

    zinc oxide: no bubbles because only a salt / zinc sulfate and water are formed / no gas is formed (1)

    accept 'zinc oxide is a base, so it forms a salt and water only'.

  4. 1 mark

    all three solids disappear / form colourless solutions because they react to form zinc sulfate, which is soluble (1)

    The idea of a soluble salt / zinc sulfate dissolving is needed. Ignore 'the solids dissolve in the acid' on its own.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.