Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Edexcel GCSE Chemistry (Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Key concepts in chemistry
Unit 2
States of matter and mixtures
Unit 3
Chemical changes
Unit 4
Extracting metals and equilibria
Unit 5
Separate chemistry 1
Avg
score:
–
Topics
done:
0/33

Conservation of mass, reacting masses and concentration

Practise 13 exam-style questions on Conservation of mass, reacting masses and concentration for Edexcel GCSE Chemistry (Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 13 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
13 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

When iron and sulfur are heated together, iron sulfide forms.

Fe + S → FeS

(relative atomic masses: S = 32, Fe = 56)

What is the maximum mass of iron sulfide that can form from 5.6 g of iron?

Choose your answer.

  • A 0.10 g
  • B 3.2 g
  • C 5.6 g
  • D 8.8 g

Model answer

D - 8.8 g
Moles of Fe = 5.6 ÷ 56 = 0.10 mol, so 0.10 mol of FeS forms.
Mass of FeS = 0.10 × (56 + 32) = 8.8 g

Explanation

One mole of iron forms one mole of iron sulfide, so 0.10 mol of Fe gives 0.10 mol of FeS (relative formula mass 88). The answer must be greater than 5.6 g because the product contains the iron plus the sulfur it combined with (5.6 g + 3.2 g = 8.8 g, as conservation of mass predicts).

Mark scheme
  1. 1 mark

    D / 8.8 g (1)

    The only correct answer is D: 5.6 g of iron is 5.6 ÷ 56 = 0.10 mol, which forms 0.10 mol of FeS; 0.10 × 88 = 8.8 g. A is not correct because 0.10 is the amount of iron sulfide in moles, not its mass in grams; B is not correct because 3.2 g is the mass of sulfur that reacts, not the mass of product; C is not correct because the product also contains the mass of the sulfur, so it must be more than 5.6 g. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

Copper(II) chloride solution is used as the electrolyte in an electrolysis experiment. A technician dissolves 3.60 g of copper(II) chloride in water and makes the solution up to 150 cm³.

Calculate the concentration of the copper(II) chloride solution in g dm⁻³.

Model answer

Volume = 150 ÷ 1000 = 0.150 dm³
Concentration = mass ÷ volume = 3.60 ÷ 0.150 = 24.0 g dm⁻³

Explanation

Convert the volume from cm³ to dm³ by dividing by 1000, then divide the mass of solute by the volume. Leaving the volume in cm³ gives 0.024, which is the concentration in g per cm³, not g dm⁻³.

Mark scheme
  1. 1 mark

    (volume =) 150 ÷ 1000 = 0.15(0) (dm³) (1)

    24(.0) (g dm⁻³) with or without working scores 2. 0.024 or any other power of ten error (e.g. 2.4, 240) scores 1. Allow 3.60 ÷ 150 × 1000 for both marks.

  2. 1 mark

    (3.60 ÷ 0.150 =) 24(.0) (g dm⁻³) (1)

    do not accept 0.15 ÷ 3.60 or 3.60 × 0.150 (wrong method).

Question 3

3 marks

Aluminium is extracted by the electrolysis of molten aluminium oxide.

2Al₂O₃ → 4Al + 3O₂

(relative atomic masses: O = 16, Al = 27)

Calculate the maximum mass of aluminium, in kg, that can be produced from 51.0 kg of aluminium oxide.

Model answer

Relative formula mass of Al₂O₃ = (2 × 27) + (3 × 16) = 102
Moles of Al₂O₃ in 51.0 kg = 51 000 g ÷ 102 = 500 mol
From the equation, 2 mol of Al₂O₃ give 4 mol of Al, so moles of Al = 1000 mol
Mass of aluminium = 1000 × 27 = 27 000 g = 27.0 kg

Explanation

Either work in moles (converting kg to g first) or use reacting masses: 204 kg of aluminium oxide gives 108 kg of aluminium, so 51.0 kg gives a quarter of that. The ratio of Al₂O₃ to Al is 2 : 4, i.e. 1 : 2; using 1 : 1 halves the answer. Give the final answer in kg as the question asks.

Mark scheme
  1. 1 mark

    (relative formula mass of Al₂O₃ =) (2 × 27) + (3 × 16) = 102 (1)

    27(.0) (kg) with or without working scores 3. Allow ECF throughout. Allow a correct method using the percentage by mass of aluminium in Al₂O₃: 54 ÷ 102 (MP2), × 51.0 = 27.0 kg (MP3). 27 000 (g) with working scores 2 (answer not converted to kg).

  2. 1 mark

    (moles of Al₂O₃ =) 51 000 ÷ 102 = 500, so moles of Al = 1000 / 204 kg of Al₂O₃ gives 108 kg of Al (1)

    allow 2 × 102 = 204 g of Al₂O₃ gives 4 × 27 = 108 g of Al; allow the calculation done in kg throughout (51.0 ÷ 102 = 0.500, × 2 = 1.00, × 27 = 27.0 kg); allow ECF from MP1; 13.5 kg (1 : 1 ratio used) with working scores 2 (MP1 and MP3).

  3. 1 mark

    27(.0) (kg) (1)

    allow ECF from MP2.

Question 4

4 marks

A student reacted 4.05 g of zinc oxide with an excess of dilute hydrochloric acid. All of the zinc oxide reacted.

ZnO + 2HCl → ZnCl₂ + H₂O

The student then added water to the solution to make the total volume 250 cm³.

(relative atomic masses: O = 16, Cl = 35.5, Zn = 65)

Calculate the concentration of zinc chloride in the final solution in g dm⁻³.

Model answer

Relative formula mass of ZnO = 65 + 16 = 81
Moles of ZnO = 4.05 ÷ 81 = 0.0500 mol
From the equation, 1 mol of ZnO forms 1 mol of ZnCl₂, so 0.0500 mol of ZnCl₂ forms.
Relative formula mass of ZnCl₂ = 65 + (2 × 35.5) = 136
Mass of ZnCl₂ = 0.0500 × 136 = 6.80 g
Volume = 250 ÷ 1000 = 0.250 dm³
Concentration = 6.80 ÷ 0.250 = 27.2 g dm⁻³

Explanation

This combines a reacting-mass calculation with a concentration: first find the mass of zinc chloride formed using the 1 : 1 ratio, then divide by the volume in dm³. The concentration must be of the zinc chloride, not the zinc oxide, so dividing 4.05 g by 0.250 dm³ is wrong. The excess acid does not change the mass of zinc chloride formed.

Mark scheme
  1. 1 mark

    (relative formula mass of ZnO = 81, so moles of ZnO =) 4.05 ÷ 81 = 0.05(00) (1)

    27.2 (g dm⁻³) with or without working scores 4. Allow ECF throughout. Alternative method using masses: 81 g of ZnO forms 136 g of ZnCl₂, so 4.05 g forms 4.05 × 136 ÷ 81 = 6.80 g (MP1, MP2 and MP3). With working: 0.0272 (volume not converted to dm³) scores 3; 16.2 (the mass of zinc oxide ÷ 0.250, which is not the concentration of zinc chloride) scores 0.

  2. 1 mark

    (relative formula mass of ZnCl₂ =) 65 + (2 × 35.5) = 136 (1)

    if the relative formula mass is incorrect, working must be seen to allow ECF.

  3. 1 mark

    (moles of ZnCl₂ = 0.0500, so mass of ZnCl₂ =) 0.0500 × 136 = 6.8(0) (g) (1)

    allow ECF from MP1 and MP2 using the 1 : 1 ratio.

  4. 1 mark

    (concentration = 6.80 ÷ 0.250 =) 27.2 (g dm⁻³) (1)

    allow ECF for the student's mass of ZnCl₂ ÷ 0.250; allow 27 (2 significant figures).

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.