Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Edexcel GCSE Chemistry (Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Key concepts in chemistry
Unit 2
States of matter and mixtures
Unit 3
Chemical changes
Unit 4
Extracting metals and equilibria
Unit 5
Separate chemistry 1
Avg
score:
–
Topics
done:
0/33

Concentration of solutions and titrations

Practise 18 exam-style questions on Concentration of solutions and titrations for Edexcel GCSE Chemistry (Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 18 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
18 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Ella puts 25.0 cm³ of dilute nitric acid and a few drops of phenolphthalein into a conical flask. She adds sodium hydroxide solution from a burette. At first, a pink colour appears where each drop of sodium hydroxide solution lands, but it disappears when she swirls the flask.

State how Ella will know that she has reached the end point.

Model answer

When one more drop of sodium hydroxide solution makes the whole solution pink, and the pink colour stays when she swirls the flask.

Explanation

Phenolphthalein is colourless in acid and pink in alkali. Before the end point, each drop makes the solution alkaline only where it lands; swirling mixes it with the acid, which neutralises it, so the pink disappears. At the end point all the acid has been neutralised, so the pink colour stays after swirling; stopping at the first flash of pink gives a titre that is too small.

Mark scheme
  1. 1 mark

    the pink colour stays / does not disappear when she swirls the flask / the whole solution stays pink (1)

    accept 'when one drop turns the whole solution (pale) pink permanently'. accept magenta / purple-pink for pink. ignore 'it turns pink' with no idea that the colour stays or that the whole solution is pink (a pink colour appears before the end point, as the question says). Do not accept 'when it turns colourless' or 'when the pink colour disappears'. Do not accept red or purple alone for pink.

Question 2

2 marks

In a titration, a student measures 25.0 cm³ of potassium hydroxide solution of known concentration into a conical flask. She then finds the volume of dilute hydrochloric acid needed to neutralise it, so that she can calculate the concentration of the acid.

Her teacher tells her to measure the potassium hydroxide solution with a pipette rather than a measuring cylinder.

Explain why she should use a pipette.

Model answer

A pipette measures a fixed volume much more accurately than a measuring cylinder. This means the number of moles of potassium hydroxide in the flask is known accurately, and this value is used to calculate the concentration of the acid, so the calculated concentration is more accurate.

Explanation

A pipette delivers a fixed volume with a much smaller uncertainty than a measuring cylinder. The calculation starts from the moles of the solution in the flask (concentration × volume), so any error in that volume carries straight through to the answer. Answers that only say a pipette is 'better' or 'easier' do not explain anything.

Mark scheme
  1. 1 mark

    a pipette measures a (fixed) volume more accurately / precisely than a measuring cylinder / a measuring cylinder is less accurate (1)

    An explanation linking MP1 and MP2. Accept 'a pipette has a smaller uncertainty'. Ignore 'easier' or 'quicker'. Do not accept 'a pipette measures smaller volumes' alone.

  2. 1 mark

    so the amount / number of moles of potassium hydroxide in the flask is known accurately, which is used to calculate the concentration (of the acid) (1)

    accept 'any error in the volume of alkali gives an error in the calculated concentration (of the acid)'; ignore 'so the result is accurate' with no link to the amount or volume of alkali

Question 3

3 marks

A student uses a titration to find out how concentrated some sodium hydroxide solution is. She pipettes 25.0 cm³ of hydrochloric acid of known concentration into a conical flask and fills a burette with the sodium hydroxide solution. She does not notice an air bubble in the jet of the burette, below the tap. During the titration, the air bubble is pushed out and the jet fills with sodium hydroxide solution.

Explain the effect of this mistake on the concentration of sodium hydroxide that she calculates.

Model answer

When the air bubble is pushed out, sodium hydroxide solution fills the jet, so the burette reading changes by more than the volume of solution that actually goes into the flask. The recorded titre is therefore larger than the volume of sodium hydroxide solution that reacted with the acid. The number of moles of sodium hydroxide, worked out from the moles of acid in the flask, is still correct, but it is divided by a volume that is too large, so the calculated concentration of sodium hydroxide is too low.

Explanation

The titre is the change in the burette reading, so anything that changes the reading without adding solution to the flask makes the titre too big. Here the solution of unknown concentration is in the burette: its moles come from the acid in the flask and are not affected, so dividing them by too large a volume gives a concentration that is too low. Saying 'too high' is a common error; that would be the effect only if the solution of known concentration were in the burette.

Mark scheme
  1. 1 mark

    the burette reading changes by more than the volume of sodium hydroxide solution that goes into the flask / part of the change in reading is solution filling the space left by the air bubble (1)

    An explanation linking. Ignore 'the result is inaccurate / wrong' with no direction.

  2. 1 mark

    so the (recorded) titre is larger than the volume of sodium hydroxide solution that reacted (with the acid) (1)

    accept 'the volume of sodium hydroxide used appears greater than it really was'; do not accept 'less sodium hydroxide is needed'

  3. 1 mark

    so the calculated concentration of sodium hydroxide is too low / lower than the true value (because the same number of moles is divided by a volume that is too large) (1)

    dependent on MP2 (a titre that is too large); accept 'concentration = moles ÷ volume, and the volume used is too big, so the concentration is too small'; the idea that the moles of sodium hydroxide (worked out from the acid in the flask) are not affected need not be stated; do not accept 'too high' (that would be the effect if the solution of known concentration were in the burette)

Question 4

4 marks

A technician checks the concentration of a bottle of dilute sulfuric acid. She titrates 25.0 cm³ of the acid with sodium hydroxide solution of concentration 0.120 mol dm⁻³. The mean titre of sodium hydroxide solution is 27.30 cm³.

H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂O

(relative atomic masses: H = 1.0, O = 16, S = 32)

Calculate the concentration of the sulfuric acid in g dm⁻³.

Model answer

Moles of NaOH = 0.120 × (27.30 ÷ 1000) = 0.003276 mol
From the equation, 2 mol of NaOH react with 1 mol of H₂SO₄, so moles of H₂SO₄ = 0.003276 ÷ 2 = 0.001638 mol
Concentration of H₂SO₄ = 0.001638 ÷ (25.0 ÷ 1000) = 0.06552 mol dm⁻³
Relative formula mass of H₂SO₄ = (2 × 1.0) + 32 + (4 × 16) = 98
Concentration = 0.06552 × 98 = 6.42 g dm⁻³

Explanation

Start from the solution whose concentration and volume are both known (the sodium hydroxide), use the 2 : 1 ratio to find the moles of sulfuric acid, and divide by the acid's volume in dm³. Multiplying a concentration in mol dm⁻³ by the relative formula mass gives g dm⁻³. The most common error is missing or reversing the ratio, which gives an answer twice or four times too large.

Mark scheme
  1. 1 mark

    (moles of NaOH =) 0.120 × 27.30 ÷ 1000 = 0.003276 / 3.276 × 10⁻³ (mol) (1)

    An answer of 6.42 g dm⁻³ with no working scores 4 marks (accept 6.4 to 6.42). An answer of 0.0655 mol dm⁻³ with no working scores 3 marks. Allow ECF throughout. Max 3 if the 2 : 1 ratio is not used or is used the wrong way round (12.8 or 25.7 g dm⁻³).

  2. 1 mark

    (moles of H₂SO₄ = 0.003276 ÷ 2 =) 0.001638 / 1.638 × 10⁻³ (mol) (1)

    for using the 2 : 1 ratio from the equation

  3. 1 mark

    (concentration = 0.001638 ÷ 0.0250 =) 0.0655 / 0.06552 (mol dm⁻³) (1)

    allow ECF from their moles of H₂SO₄ ÷ 0.0250

  4. 1 mark

    (0.06552 × 98 =) 6.42 (g dm⁻³) (1)

    for multiplying their concentration in mol dm⁻³ by 98 (the relative formula mass of H₂SO₄); allow 6.4 or 6.419 (from 0.0655)

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.