Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Edexcel GCSE Chemistry (Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Key concepts in chemistry
Unit 2
States of matter and mixtures
Unit 3
Chemical changes
Unit 4
Extracting metals and equilibria
Unit 5
Separate chemistry 1
Avg
score:
–
Topics
done:
0/33

Acids, alkalis and pH

Practise 18 exam-style questions on Acids, alkalis and pH for Edexcel GCSE Chemistry (Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 18 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
18 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Solution P has a pH of 3. Solution Q has a pH of 6.

How many times greater is the concentration of hydrogen ions in solution P than in solution Q?

Choose your answer.

  • A 2
  • B 3
  • C 100
  • D 1000

Model answer

D - 1000 times greater.

Explanation

Each decrease of 1 pH unit means the hydrogen ion concentration is 10 times greater. From pH 6 to pH 3 is a decrease of 3 units, so the concentration is 10 × 10 × 10 = 1000 times greater in P. A common error is to think a lower pH by 3 means 3 times (or 2 times) as many hydrogen ions.

Mark scheme
  1. 1 mark

    D / 1000 (1)

    The only correct answer is D. A is not correct because it comes from dividing the pH values (6 ÷ 3); the pH scale does not work like this. B is not correct because it is the difference in pH, not the factor by which the hydrogen ion concentration changes. C is not correct because a difference of 3 pH units is three factors of 10 (10 × 10 × 10), not two. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

Hydrochloric acid is a strong acid.

A technician has 5.0 cm³ of hydrochloric acid with a pH of 1.0. She needs hydrochloric acid with a pH of 3.0, so she will add water to the 5.0 cm³ of acid.

Determine the total volume of solution she must make.

Model answer

The pH must rise from 1.0 to 3.0, which is an increase of 2 pH units. Each increase of 1 pH unit needs the hydrogen ion concentration to be 10 times lower, so it must be 10 × 10 = 100 times lower.
The acid must be diluted 100 times: total volume = 5.0 × 100 = 500 cm³ (by adding 495 cm³ of water).

Explanation

As the hydrogen ion concentration decreases by a factor of 10, the pH increases by 1, so a rise of 2 pH units needs a hundredfold dilution. Diluting a strong acid does not change how much it dissociates; it spreads the same number of hydrogen ions through a larger volume. A common mistake is to use a factor of 10 for a change of 2 pH units, giving 50 cm³.

Mark scheme
  1. 1 mark

    the hydrogen ion concentration must decrease by a factor of 100 / become 100 times lower (1)

    500 cm³ with or without working scores 2. Accept 'the pH must rise by 2, so the acid must be 10 × 10 = 100 times more dilute'. Do not accept 'the acid must become 100 times weaker' (strong and weak describe the degree of dissociation, not the concentration); accept '100 times more dilute'.

  2. 1 mark

    500 (cm³) (1)

    accept 'add 495 cm³ of water' / 0.5 dm³. Do not accept 50 cm³ (a factor of 10), 15 cm³ (5.0 × 3) or 10 cm³. No ecf for an incorrect factor.

Question 3

3 marks

Ali adds water to some hydrochloric acid. He says:

'Adding water has turned the hydrochloric acid into a weak acid.'

Explain why Ali is not correct.

Model answer

Adding water only makes the acid more dilute: there is less acid in each dm³ of solution. Whether an acid is strong or weak depends on its degree of dissociation, not on its concentration. A weak acid is only partially dissociated into ions, but hydrochloric acid is still fully dissociated after water is added, so it is now a dilute strong acid, not a weak acid.

Explanation

Concentrated and dilute describe how much acid is dissolved in a given volume; strong and weak describe what fraction of the acid molecules dissociate into ions. Adding water changes the concentration but not the degree of dissociation of hydrochloric acid. Examiners have reported that many students confuse 'weak' with 'dilute'.

Mark scheme
  1. 1 mark

    adding water makes the acid (more) dilute / lowers its concentration / there is less acid in each cm³ or dm³ (of solution) (1)

    An explanation including any three from the four points; max 3. Accept 'there are fewer acid particles / H⁺ ions in a given volume'. Ignore 'the acid becomes less acidic' / references to pH on their own.

  2. 1 mark

    strong and weak describe the degree of dissociation / how much of the acid dissociates into ions (not the concentration) (1)

    accept ionises for dissociates throughout. Do not accept 'strong means concentrated' / 'weak means dilute'.

  3. 1 mark

    hydrochloric acid is (still) fully dissociated (into ions) in solution, so it is still a strong acid / it is now a dilute strong acid (1)

    accept 'all the HCl molecules (still) split into H⁺ and Cl⁻ ions'. Ignore 'it is still hydrochloric acid' on its own.

  4. 1 mark

    a weak acid is only partially dissociated (into ions) in solution (1)

    accept 'in a weak acid only some of the molecules form ions'.

Question 4

4 marks

In an experiment, 0.28 g of calcium oxide was needed to neutralise 100 cm³ of hydrochloric acid with a pH of 1.0. Hydrochloric acid is a strong acid.

A student plans to repeat the experiment with a more dilute acid, made by adding water to 10 cm³ of the original acid until the total volume is 100 cm³. She plans to add the calcium oxide 0.05 g at a time and measure the pH after each addition.

Predict the starting pH of the diluted acid and the mass of calcium oxide needed to neutralise it.

Explain why adding the calcium oxide 0.05 g at a time is not suitable for the diluted acid.

Model answer

The diluted acid is 10 times more dilute, so its hydrogen ion concentration is 10 times lower and its pH is 1 unit higher: pH 2.0.
It contains one tenth of the acid, so it needs one tenth of the calcium oxide: 0.28 ÷ 10 = 0.028 g.

A single 0.05 g portion is almost twice the 0.028 g needed, so the very first addition would make the mixture alkaline. There would be no readings while the pH rose towards 7, so the student could not find the mass needed to neutralise the acid; much smaller portions, such as 0.005 g, should be used.

Explanation

Diluting 10 cm³ to 100 cm³ lowers the hydrogen ion concentration by a factor of 10, which raises the pH by 1. The amount of acid to be neutralised is one tenth of the original, so one tenth of the calcium oxide is needed. The portion size must be small compared with the total mass needed, otherwise the change in pH cannot be followed.

Mark scheme
  1. 1 mark

    pH 2(.0) (1)

    pH 2 with or without working scores this mark (the acid is 10 times more dilute, so the hydrogen ion concentration is 10 times lower and the pH is 1 unit higher). Do not accept pH 10 or pH 0.

  2. 1 mark

    0.028 g (1)

    0.028 g with or without working scores this mark. Accept 'one tenth of 0.28 g'. Do not accept 2.8 g or 0.28 g.

  3. 1 mark

    0.05 g is more than the mass needed to neutralise the acid / is almost twice the mass needed (1)

    allow ecf from an incorrect mass for MP2 that is less than 0.05 g.

  4. 1 mark

    so the mixture would go from acidic to alkaline after the first addition / there would be no readings as the pH rises towards 7, so the mass needed to neutralise the acid could not be found (1)

    accept 'the first portion would overshoot the neutral point'. Accept 'smaller portions (e.g. 0.005 g or 0.01 g) are needed so that there are several readings before the mixture becomes neutral'. Ignore 'it is not accurate' on its own.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.