Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA Level 2 Further Maths (Non-calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number
Unit 2
Algebra
Unit 3
Coordinate Geometry (2 dimensions only)
Unit 4
Calculus
Unit 5
Matrix Transformations
Unit 6
Geometry
Avg
score:
–
Topics
done:
0/43

Trigonometry and Pythagoras' theorem in 2D and 3D problems

Practise 17 exam-style questions on Trigonometry and Pythagoras' theorem in 2D and 3D problems for AQA Level 2 Further Maths (Non-calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 17 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
17 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

The diagram shows a triangular prism ABCDEF on a horizontal surface.
The base ABED is a rectangle.
The cross-section ABC is a right-angled triangle with angle CAB = 90°
\(AB = 5\sqrt{3}\) cm, \(AC = 5\) cm and \(BE = 8\) cm.
\(\theta\) is the angle between the face BCFE and the base ABED.

Work out the value of \(\theta\).

A triangular prism drawn in 3D with hidden edges shown as dashed lines. Its end is a right-angled triangle. The base of the triangle is labelled 5√3 cm (along the bottom edge of the front triangle). The height of the triangle is labelled 5 cm (along the vertical left side of the front triangle). The length of the prism is labelled 8 cm (along the bottom edge going back from the front triangle). The front triangle is ABC (A bottom left, B bottom right, C the top) and the back triangle is DEF, with D behind A, E behind B and F behind C. The angle ABC at B is marked θ. The diagram is labelled "Not drawn accurately".

Model answer

AB and BC are both perpendicular to BE, so \(\theta\) = angle CBA.
\(\tan\theta = \dfrac{AC}{AB} = \dfrac{5}{5\sqrt{3}} = \dfrac{1}{\sqrt{3}}\)
\(\theta = 30^\circ\)

Explanation

The angle between two planes is measured between two lines, one in each plane, that are perpendicular to the edge where the planes meet. Here those lines are BA and BC, so the angle is in the right-angled triangle ABC, with \(\tan\theta = \dfrac{1}{\sqrt{3}}\). The 8 cm length is not needed.

Mark scheme
  1. 1 mark

    M1 for \(\tan\theta = \dfrac{5}{5\sqrt{3}}\) oe

    \(\theta\) is angle CBA (AB and CB are both perpendicular to the common edge BE). oe eg \(\tan\theta = \dfrac{1}{\sqrt{3}}\), or BC = 10 and \(\sin\theta = \dfrac{5}{10}\)

  2. 1 mark

    A1 for \(30\)

    Condone a missing degree sign. 60 (angle ACB) is M0A0. A fully correct answer with no working scores full marks.

Question 2

3 marks

The diagram shows a cuboid ABCDEFGH.
\(AB = 6\) cm, \(BC = 8\) cm and \(CG = 10\) cm.
\(\theta\) is the angle between the line AG and the plane ABCD.

Work out the value of \(\theta\).

A cuboid drawn in 3D with hidden edges shown as dashed lines. The length is labelled 6 cm (along the front bottom edge). The width (the edge going back) is labelled 8 cm (along the bottom edge going back on the right). The height is labelled 10 cm (along the front left vertical edge). The vertices are labelled: base ABCD (A front left, B front right, C back right, D back left) and top EFGH, with E above A, F above B, G above C and H above D. A straight line is drawn from A to G. A straight line is drawn from A to C. The angle CAG at A is marked θ. The diagram is labelled "Not drawn accurately".

Model answer

\(AC^2 = 6^2 + 8^2 = 100\), so \(AC = 10\) cm
Triangle ACG has a right angle at C.
\(\tan\theta = \dfrac{CG}{AC} = \dfrac{10}{10} = 1\)
\(\theta = 45^\circ\)

Explanation

The projection of AG onto the base is AC, so \(\theta\) is angle GAC in the right-angled triangle ACG. Pythagoras gives AC = 10 cm, which equals CG, so the triangle is isosceles and \(\theta = 45^\circ\). Using a side of the base, such as AB, instead of the diagonal AC is the common error.

Mark scheme
  1. 1 mark

    M1 for \(AC^2 = 6^2 + 8^2\) or \(AC = 10\)

    Recognising the 6, 8, 10 triangle implies M1

  2. 1 mark

    M1 for \(\tan\theta = \dfrac{10}{\text{their } AC}\) oe

    oe eg triangle ACG is isosceles and right-angled at C

  3. 1 mark

    A1 for \(45\)

    Condone a missing degree sign. A fully correct answer with no working scores full marks.

Question 3

3 marks

The diagram shows a square-based pyramid VABCD.
The base ABCD is a square with sides of length 8 cm.
\(VA = VB = VC = VD = 8\) cm

Sine rule: \(\dfrac{a}{\sin A} = \dfrac{b}{\sin B} = \dfrac{c}{\sin C}\)   Cosine rule: \(a^2 = b^2 + c^2 - 2bc\cos A\)   Area of triangle \(= \dfrac{1}{2}ab\sin C\)

Work out the size of angle AVC.

A square-based pyramid drawn in 3D with hidden edges shown as dashed lines. The length of the base is labelled 8 cm (along the front edge of the base). The length of a sloping edge is labelled 8 cm (along the sloping edge from the apex to the front right corner of the base). The base is ABCD (A front left, B front right, C back right, D back left) and the apex is V. A straight line is drawn from A to C. The diagram is labelled "Not drawn accurately".

Model answer

\(AC^2 = 8^2 + 8^2 = 128\)
In triangle AVC: \(\cos(\text{angle } AVC) = \dfrac{8^2 + 8^2 - 128}{2 \times 8 \times 8} = \dfrac{0}{128} = 0\)
Angle AVC = 90°
(Or: \(VA^2 + VC^2 = 128 = AC^2\), so by the converse of Pythagoras the angle at V is a right angle.)

Explanation

Triangle AVC lies inside the pyramid: two sides are edges of 8 cm and the third is the base diagonal \(8\sqrt{2}\). The cosine rule gives cos AVC = 0, or the converse of Pythagoras shows the angle is 90°. Do not confuse it with angle AVB in a face, which is 60°.

Mark scheme
  1. 1 mark

    M1 for \(AC^2 = 8^2 + 8^2\) (\(= 128\)) or \(AC = 8\sqrt{2}\)

    The diagonal of the base

  2. 1 mark

    M1 for \(VA^2 + VC^2 = 64 + 64 = 128 = AC^2\) or \(\cos(\text{angle } AVC) = \dfrac{8^2 + 8^2 - 128}{2 \times 8 \times 8}\) oe

    ft their \(AC^2\). oe eg \(\sin\left(\dfrac{1}{2}\text{angle } AVC\right) = \dfrac{4\sqrt{2}}{8}\)

  3. 1 mark

    A1 for \(90\)

    Needs both M marks. Condone a missing degree sign. 60 (angle AVB, in a face) is M0M0A0. A fully correct answer with no working scores full marks.

Question 4

4 marks

The diagram shows a cube ABCDEFGH with edges of length 4 cm.
M is the midpoint of EH and N is the midpoint of AD.
\(\theta\) is the angle between the line MC and the base ABCD.

Work out the exact value of \(\tan\theta\).
Give your answer in the form \(\dfrac{a\sqrt{5}}{b}\) where \(a\) and \(b\) are integers.

Type square roots as sqrt( ), for example 2sqrt(3).
Type fractions with /, for example (x + 1)/(x - 2).

A cube drawn in 3D with hidden edges shown as dashed lines. The length of an edge is labelled 4 cm (along the front bottom edge). The vertices are labelled: base ABCD (A front left, B front right, C back right, D back left) and top EFGH, with E above A, F above B, G above C and H above D. M is the midpoint of EH. N is the midpoint of AD. A straight line is drawn from M to C. A straight line is drawn from N to C. A straight line is drawn from M to N. The angle NCM at C is marked θ. The diagram is labelled "Not drawn accurately".

Model answer

N is the midpoint of AD, so ND = 2 cm.
\(NC^2 = ND^2 + DC^2 = 2^2 + 4^2 = 20\), so \(NC = 2\sqrt{5}\) cm
M is vertically above N with MN = 4 cm, so \(\theta\) = angle MCN.
\(\tan\theta = \dfrac{MN}{NC} = \dfrac{4}{2\sqrt{5}} = \dfrac{2}{\sqrt{5}} = \dfrac{2\sqrt{5}}{5}\)

Explanation

The projection of MC onto the base runs from N (directly below M) to C, so \(\theta\) is in the right-angled triangle MNC. NC comes from Pythagoras in the base. Rationalising \(\dfrac{2}{\sqrt{5}}\) gives the required form. Students often use the slanting length MC (6 cm) as the adjacent side.

Mark scheme
  1. 1 mark

    M1 for \(NC^2 = 4^2 + 2^2\) (\(= 20\)) or \(NC = 2\sqrt{5}\)

    Right-angled triangle NDC, with ND = 2 and DC = 4

  2. 1 mark

    M1 for \(MN = 4\) and angle MNC \(= 90^\circ\)

    M is vertically above N, so NC is the projection of MC on the base

  3. 1 mark

    M1 for \(\tan\theta = \dfrac{4}{\sqrt{20}}\) oe

    ft their NC. oe eg \(\dfrac{4}{2\sqrt{5}}\) or \(\dfrac{2}{\sqrt{5}}\)

  4. 1 mark

    A1 for \(\dfrac{2\sqrt{5}}{5}\)

    Must be in the form asked: \(\dfrac{2}{\sqrt{5}}\) not rationalised is A0. Accept 2sqrt(5)/5. A fully correct answer with no working scores full marks. Using MC as the adjacent side (\(\tan\theta = \dfrac{4}{6}\)) is M1M1M0A0.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.